# Nissan Hardbody 5 speed trans **URL:** \ **Category:** Classifieds\ **Created:** [March 4, 2014, 9:07pm UTC](https://forums.speedlife.net/t/nissan-hardbody-5-speed-trans/268472 "2014-03-04T21:07:50Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![Skidplate](https://avatars.discourse-cdn.com/v4/letter/s/c2a13f/32.png) [@Skidplate](https://forums.speedlife.net/u/Skidplate)\ **Post date:** [March 4, 2014, 9:07pm UTC](https://forums.speedlife.net/t/nissan-hardbody-5-speed-trans/268472/1 "2014-03-04T21:07:50Z")
4 cyl, 2wd. my autotragic went. im not putting another shitty auto in it because i want to blow the fucker up with spray, since i have a second motor. anyway. hardbody trans. if you happen to be parting one i’ll take the clutch pedal assembly, shifter/boot, clutch master and slave. PM with price and location don’t lose your shit if i don’t respond fast, i get on here maybe once a week. ---
**Author:** ![robftw](https://avatars.discourse-cdn.com/v4/letter/r/6bbea6/32.png) [@robftw](https://forums.speedlife.net/u/robftw)\ **Post date:** [March 4, 2014, 10:33pm UTC](https://forums.speedlife.net/t/nissan-hardbody-5-speed-trans/268472/2 "2014-03-04T22:33:46Z")
Close ratio from a zx or regular from a 280z? I can get both. ---
**Author:** ![Skidplate](https://avatars.discourse-cdn.com/v4/letter/s/c2a13f/32.png) [@Skidplate](https://forums.speedlife.net/u/Skidplate)\ **Post date:** [March 5, 2014, 12:06am UTC](https://forums.speedlife.net/t/nissan-hardbody-5-speed-trans/268472/3 "2014-03-05T00:06:18Z")
preferably a hardbody specific trans. the overall case is shorter then any of the car transmissions and i’d have to fuck around getting a custom driveshaft built. buuuuut. price? ---
**Author:** ![robftw](https://avatars.discourse-cdn.com/v4/letter/r/6bbea6/32.png) [@robftw](https://forums.speedlife.net/u/robftw)\ **Post date:** [March 5, 2014, 11:30am UTC](https://forums.speedlife.net/t/nissan-hardbody-5-speed-trans/268472/4 "2014-03-05T11:30:42Z")
usually 75-200 each I can locate a clutch and pp too. what motor do you have in it, if its based off the L engine everything will bolt up ---
**Author:** ![Skidplate](https://avatars.discourse-cdn.com/v4/letter/s/c2a13f/32.png) [@Skidplate](https://forums.speedlife.net/u/Skidplate)\ **Post date:** [March 5, 2014, 12:18pm UTC](https://forums.speedlife.net/t/nissan-hardbody-5-speed-trans/268472/5 "2014-03-05T12:18:55Z")
KA24E. i know a z31, z32 trans will fit with a different bellhousing, the s13 KAs are bolt up, and the SR fits, again with a bellhousing swap. ---
**Author:** ![robftw](https://avatars.discourse-cdn.com/v4/letter/r/6bbea6/32.png) [@robftw](https://forums.speedlife.net/u/robftw)\ **Post date:** [March 5, 2014, 12:35pm UTC](https://forums.speedlife.net/t/nissan-hardbody-5-speed-trans/268472/6 "2014-03-05T12:35:23Z")
I can find an s13 tranny too, let me make some calls