# no clutch pressure

**URL:** <https://forums.speedlife.net/t/no-clutch-pressure/98679>\
**Category:** SON240sx Automotive\
**Created:** [August 7, 2006, 8:33am UTC](https://forums.speedlife.net/t/no-clutch-pressure/98679 "2006-08-07T08:33:03Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![240rex](https://avatars.discourse-cdn.com/v4/letter/2/54ee81/32.png) [@240rex](https://forums.speedlife.net/u/240rex)\
**Post date:** [August 7, 2006, 8:33am UTC](https://forums.speedlife.net/t/no-clutch-pressure/98679/1 "2006-08-07T08:33:03Z")

</div>

so installed new engine its running, but have no clutch. the thing is down to the floor. we bled the system, got pressure for a bit, then nothing right after. just bought a new clutch master cylinder, is there anytihng else that could be affected?

---

<div class="post-metadata">

**Author:** ![pearlS13](https://avatars.discourse-cdn.com/v4/letter/p/e68b1a/32.png) [@pearlS13](https://forums.speedlife.net/u/pearlS13)\
**Post date:** [August 7, 2006, 8:57am UTC](https://forums.speedlife.net/t/no-clutch-pressure/98679/2 "2006-08-07T08:57:13Z")

</div>

check the slave cylinder on the tranny, that will usually fail before the master does.

---

<div class="post-metadata">

**Author:** ![Axlerod](https://avatars.discourse-cdn.com/v4/letter/a/8edcca/32.png) [@Axlerod](https://forums.speedlife.net/u/Axlerod)\
**Post date:** [August 7, 2006, 10:27am UTC](https://forums.speedlife.net/t/no-clutch-pressure/98679/3 "2006-08-07T10:27:36Z")

</div>

Either you have a leak, or one of the cylinders is gone.

---

<div class="post-metadata">

**Author:** ![Flash-Point-Matt](https://avatars.discourse-cdn.com/v4/letter/f/94ad74/32.png) [@Flash-Point-Matt](https://forums.speedlife.net/u/Flash-Point-Matt)\
**Post date:** [August 8, 2006, 3:55am UTC](https://forums.speedlife.net/t/no-clutch-pressure/98679/4 "2006-08-08T03:55:57Z")

</div>

bleed the system