# No oil cooler?

**URL:** <https://forums.speedlife.net/t/no-oil-cooler/177433>\
**Category:** PittSpeed Automotive\
**Created:** [October 1, 2005, 10:01am UTC](https://forums.speedlife.net/t/no-oil-cooler/177433 "2005-10-01T10:01:10Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jeff95TA](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jeff95ta/32/5935_2.png) [@Jeff95TA](https://forums.speedlife.net/u/Jeff95TA)\
**Post date:** [October 1, 2005, 10:01am UTC](https://forums.speedlife.net/t/no-oil-cooler/177433/1 "2005-10-01T10:01:10Z")

</div>

Car came from the factory with the GU5 (3.23) axle, which means I should have an oil cooler, but I don’t. 😕 I was thinking of removing it anyway since it’s been known to be a problem with clogging. Just not sure why I don’t have one.

I’m also thinking about doing an oil accumulator. Worthwhile?

What about an aftermarket oil cooler?

---

<div class="post-metadata">

**Author:** ![22PSI](https://avatars.discourse-cdn.com/v4/letter/2/4af34b/32.png) [@22PSI](https://forums.speedlife.net/u/22PSI)\
**Post date:** [October 1, 2005, 11:00am UTC](https://forums.speedlife.net/t/no-oil-cooler/177433/2 "2005-10-01T11:00:15Z")

</div>

Im going through a rebuild right now… i wont be using an oil cooler to start with. see what oil psi is. oil would prolly be about the same temp as the antifreeze. You can get a good oil cooler with unniveral fit from summit. just mounth it so it gets some air flow to it.