# No oil pressure, need help **URL:** \ **Category:** Shift518 Automotive\ **Created:** [December 17, 2009, 7:09am UTC](https://forums.speedlife.net/t/no-oil-pressure-need-help/249130 "2009-12-17T07:09:10Z")\ **Posts on this page:** 19\ **Page:** 3
**Author:** ![Boxersix](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/boxersix/32/6327_2.png) [@Boxersix](https://forums.speedlife.net/u/Boxersix)\ **Post date:** [December 20, 2009, 6:03pm UTC](https://forums.speedlife.net/t/no-oil-pressure-need-help/249130/41 "2009-12-20T18:03:04Z")
> [@So what's next?](https://forums.speedlife.net/t/so-whats-next/27543/112): > > The pistons, rods,Rings are all stock… > > my car has value to me, its not just a DD… > > But if i drop the crank in with factory balance with factory components i thought it should be fine. > > Im just wondering because im curious and if im gonna get a new crank i was just gonna rip the bottom end apart and not remove the head and shit…:ahh That’s in your hands then. If it’s something you plan to keep and drive hard, then ensuring the motor is dynamically balanced will be in your best interest. If it were just a beater I’d say save the cash. ---
**Author:** ![ImportInWorks518](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/importinworks518/32/6513_2.png) [@ImportInWorks518](https://forums.speedlife.net/u/ImportInWorks518)\ **Post date:** [December 21, 2009, 8:33am UTC](https://forums.speedlife.net/t/no-oil-pressure-need-help/249130/42 "2009-12-21T08:33:45Z")
Just showing some progress i suppose. The motor should come out tomorrow sometime, i only get like 2 hours a day to work on it so thats kinda shitty but i cant complain. ![http://i57.photobucket.com/albums/g239/Slimshady1o2/utf-8BSU1HMDAwNjEtMjAwOTEyMjEtMTA0N.jpg](http://i57.photobucket.com/albums/g239/Slimshady1o2/utf-8BSU1HMDAwNjEtMjAwOTEyMjEtMTA0N.jpg) ![http://i57.photobucket.com/albums/g239/Slimshady1o2/utf-8BSU1HMDAwNjItMjAwOTEyMjEtMTA0N.jpg](http://i57.photobucket.com/albums/g239/Slimshady1o2/utf-8BSU1HMDAwNjItMjAwOTEyMjEtMTA0N.jpg) Should i bring the motor out from the TOP or BOTTOM? And how can i tell if my Tranny IS LSD? ---
**Author:** ![Wayne64SS](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/wayne64ss/32/6365_2.png) [@Wayne64SS](https://forums.speedlife.net/u/Wayne64SS)\ **Post date:** [December 23, 2009, 6:51am UTC](https://forums.speedlife.net/t/no-oil-pressure-need-help/249130/43 "2009-12-23T06:51:09Z")
I pull Hondas from the top, leave the tranny attached. This should’ve been done in 2 hours 😉 ---
**Author:** ![ImportInWorks518](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/importinworks518/32/6513_2.png) [@ImportInWorks518](https://forums.speedlife.net/u/ImportInWorks518)\ **Post date:** [December 23, 2009, 8:21am UTC](https://forums.speedlife.net/t/no-oil-pressure-need-help/249130/44 "2009-12-23T08:21:44Z")
The motor is out today. ![http://i57.photobucket.com/albums/g239/Slimshady1o2/utf-8BSU1HMDAwNjgtMjAwOTEyMjMtMDk0O.jpg](http://i57.photobucket.com/albums/g239/Slimshady1o2/utf-8BSU1HMDAwNjgtMjAwOTEyMjMtMDk0O.jpg) My partner in crime. ![http://i57.photobucket.com/albums/g239/Slimshady1o2/utf-8BSU1HMDAwNjctMjAwOTEyMjMtMDkzN.jpg](http://i57.photobucket.com/albums/g239/Slimshady1o2/utf-8BSU1HMDAwNjctMjAwOTEyMjMtMDkzN.jpg) And we took the tranny out. I decided that the TOB could be changed so if anyone has a new one? And i think I’m going to throw a new clutch in too if anyone has any suggestions? ---
**Author:** ![Wayne64SS](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/wayne64ss/32/6365_2.png) [@Wayne64SS](https://forums.speedlife.net/u/Wayne64SS)\ **Post date:** [December 23, 2009, 6:20pm UTC](https://forums.speedlife.net/t/no-oil-pressure-need-help/249130/45 "2009-12-23T18:20:50Z")
ebay, exedy clutch and flywheel kit. I believe exedy is the OEM for Honda but not 100% on this. ---
**Author:** ![K20power](https://avatars.discourse-cdn.com/v4/letter/k/41988e/32.png) [@K20power](https://forums.speedlife.net/u/K20power)\ **Post date:** [December 23, 2009, 7:17pm UTC](https://forums.speedlife.net/t/no-oil-pressure-need-help/249130/46 "2009-12-23T19:17:18Z")
Competition Clutch, resurface OEM flywheel if needed! ---
**Author:** ![LKSi](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/lksi/32/6316_2.png) [@LKSi](https://forums.speedlife.net/u/LKSi)\ **Post date:** [December 23, 2009, 7:22pm UTC](https://forums.speedlife.net/t/no-oil-pressure-need-help/249130/47 "2009-12-23T19:22:58Z")
To tell if it has an LSD, look through where the splines of the axles go in. If you can see right through it it is not LSD. ---
**Author:** ![ImportInWorks518](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/importinworks518/32/6513_2.png) [@ImportInWorks518](https://forums.speedlife.net/u/ImportInWorks518)\ **Post date:** [December 23, 2009, 7:40pm UTC](https://forums.speedlife.net/t/no-oil-pressure-need-help/249130/48 "2009-12-23T19:40:41Z")
The Tranny is an S80 Trans. i thought they came with LSD, unless somebody took it out? Either way i do not have it. ---
**Author:** ![K20power](https://avatars.discourse-cdn.com/v4/letter/k/41988e/32.png) [@K20power](https://forums.speedlife.net/u/K20power)\ **Post date:** [December 23, 2009, 7:41pm UTC](https://forums.speedlife.net/t/no-oil-pressure-need-help/249130/49 "2009-12-23T19:41:59Z")
> [@Hi I'm new](https://forums.speedlife.net/t/hi-im-new/27623/18): > > The Tranny is an S80 Trans. i thought they came with LSD, unless somebody took it out? > Either way i do not have it. S80 trans??? ---
**Author:** ![LKSi](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/lksi/32/6316_2.png) [@LKSi](https://forums.speedlife.net/u/LKSi)\ **Post date:** [December 23, 2009, 7:43pm UTC](https://forums.speedlife.net/t/no-oil-pressure-need-help/249130/50 "2009-12-23T19:43:31Z")
Almost all b series tranny’s have s80 stamped on them. ---
**Author:** ![ImportInWorks518](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/importinworks518/32/6513_2.png) [@ImportInWorks518](https://forums.speedlife.net/u/ImportInWorks518)\ **Post date:** [December 23, 2009, 8:16pm UTC](https://forums.speedlife.net/t/no-oil-pressure-need-help/249130/51 "2009-12-23T20:16:39Z")
> [@Totally Unlimited txting on VZW?!?!?!](https://forums.speedlife.net/t/totally-unlimited-txting-on-vzw/27446/42): > > Almost all b series tranny’s have s80 stamped on them. damn. well from driving it i can tell you that its not a tranny from a b18b because the gears are smaller. ---
**Author:** ![ImportInWorks518](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/importinworks518/32/6513_2.png) [@ImportInWorks518](https://forums.speedlife.net/u/ImportInWorks518)\ **Post date:** [December 23, 2009, 8:17pm UTC](https://forums.speedlife.net/t/no-oil-pressure-need-help/249130/52 "2009-12-23T20:17:10Z")
> [@69 Camaro resto - It's ALIVE! - no 56k](https://forums.speedlife.net/t/69-camaro-resto-its-alive-no-56k/13530/415): > > S80 trans??? **S80** - Found in: Integra Type R 98+ (LSD) - Type: Hydraulic - 1st: 3.230 - 2nd: 2.105 - 3rd: 1.458 - 4th: 1.034 - 5th: 0.787 - R: 3.000 - FD: 4.785 This is what i thought the tranny was ---
**Author:** ![Wayne64SS](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/wayne64ss/32/6365_2.png) [@Wayne64SS](https://forums.speedlife.net/u/Wayne64SS)\ **Post date:** [December 23, 2009, 8:21pm UTC](https://forums.speedlife.net/t/no-oil-pressure-need-help/249130/53 "2009-12-23T20:21:19Z")
> [@FS/TRADE 1994 Grand Prix GTP Damaged](https://forums.speedlife.net/t/fs-trade-1994-grand-prix-gtp-damaged/27274/30): > > ![http://i57.photobucket.com/albums/g239/Slimshady1o2/utf-8BSU1HMDAwNjctMjAwOTEyMjMtMDkzN.jpg](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/3X/8/8/885427fe5e99a7a1e1851be8fb2d40ca7584a141.jpeg) Hey nice Mohawk… let me get those truck adapters from it? They are located on each side of the lift, in holders. You can see the set of 3 on the post in the left of the pic. The round things. 🙂 ---
**Author:** ![LKSi](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/lksi/32/6316_2.png) [@LKSi](https://forums.speedlife.net/u/LKSi)\ **Post date:** [December 23, 2009, 8:24pm UTC](https://forums.speedlife.net/t/no-oil-pressure-need-help/249130/54 "2009-12-23T20:24:15Z")
Might be a GS-R trans? ---
**Author:** ![ImportInWorks518](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/importinworks518/32/6513_2.png) [@ImportInWorks518](https://forums.speedlife.net/u/ImportInWorks518)\ **Post date:** [January 5, 2010, 8:54am UTC](https://forums.speedlife.net/t/no-oil-pressure-need-help/249130/55 "2010-01-05T08:54:26Z")
Got my oil pump out today. I think i know why it wasn’t pumping oil anymore ![http://i57.photobucket.com/albums/g239/Slimshady1o2/utf-8BSU1HMDAxMDktMjAxMDAxMDUtMTA0N.jpg](http://i57.photobucket.com/albums/g239/Slimshady1o2/utf-8BSU1HMDAxMDktMjAxMDAxMDUtMTA0N.jpg) ---
**Author:** ![freakLS7](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/freakls7/32/6298_2.png) [@freakLS7](https://forums.speedlife.net/u/freakLS7)\ **Post date:** [January 5, 2010, 8:57am UTC](https://forums.speedlife.net/t/no-oil-pressure-need-help/249130/56 "2010-01-05T08:57:33Z")
that looks fine clean it up and slap it back in there youll get another 50k out of that!!! :rofl ---
**Author:** ![ImportInWorks518](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/importinworks518/32/6513_2.png) [@ImportInWorks518](https://forums.speedlife.net/u/ImportInWorks518)\ **Post date:** [January 5, 2010, 9:43am UTC](https://forums.speedlife.net/t/no-oil-pressure-need-help/249130/57 "2010-01-05T09:43:49Z")
> [@Needed- Body and paint work! Vintage car](https://forums.speedlife.net/t/needed-body-and-paint-work-vintage-car/28029/3): > > that looks fine clean it up and slap it back in there youll get another 50k out of that!!! :rofl lmao yea im just gonna use some honda-bond or maybe 2 part epoxy:ahh ---
**Author:** ![freakLS7](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/freakls7/32/6298_2.png) [@freakLS7](https://forums.speedlife.net/u/freakLS7)\ **Post date:** [January 5, 2010, 1:16pm UTC](https://forums.speedlife.net/t/no-oil-pressure-need-help/249130/58 "2010-01-05T13:16:31Z")
perfect!!! ---
**Author:** ![ImportInWorks518](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/importinworks518/32/6513_2.png) [@ImportInWorks518](https://forums.speedlife.net/u/ImportInWorks518)\ **Post date:** [January 6, 2010, 10:26am UTC](https://forums.speedlife.net/t/no-oil-pressure-need-help/249130/59 "2010-01-06T10:26:12Z")
Got my crank out today :clap One of my rods ![http://i57.photobucket.com/albums/g239/Slimshady1o2/utf-8BSU1HMDAxMjItMjAxMDAxMDYtMTEwN.jpg](http://i57.photobucket.com/albums/g239/Slimshady1o2/utf-8BSU1HMDAxMjItMjAxMDAxMDYtMTEwN.jpg) And my crank im gonna MIC it tomorrow and see how bad it is. ![http://i57.photobucket.com/albums/g239/Slimshady1o2/utf-8BSU1HMDAxMjAtMjAxMDAxMDYtMTEwN.jpg](http://i57.photobucket.com/albums/g239/Slimshady1o2/utf-8BSU1HMDAxMjAtMjAxMDAxMDYtMTEwN.jpg) I also picked up a clutch kit the other day. Stage 3 Pressure plate lightweight flywheel reassembly hopefully starts friday Crank is good Bearings dont come till the 15th… sickk [Previous page](https://forums.speedlife.net/t/no-oil-pressure-need-help/249130.md?page=2)