# NO REVERSE **URL:** \ **Category:** PittSpeed Automotive\ **Created:** [August 6, 2008, 10:14am UTC](https://forums.speedlife.net/t/no-reverse/198910 "2008-08-06T10:14:09Z")\ **Posts on this page:** 17\ **Page:** 2
**Author:** ![imported\_gearhead](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/imported_gearhead/32/5957_2.png) [@imported\_gearhead](https://forums.speedlife.net/u/imported_gearhead)\ **Post date:** [September 2, 2008, 2:08pm UTC](https://forums.speedlife.net/t/no-reverse/198910/21 "2008-09-02T14:08:51Z")
its ok… he works on dsm’s. u have linkage, only honda that has cables are prelude/accord/rsx ---
**Author:** ![pghdsm](https://avatars.discourse-cdn.com/v4/letter/p/51bf81/32.png) [@pghdsm](https://forums.speedlife.net/u/pghdsm)\ **Post date:** [September 2, 2008, 2:11pm UTC](https://forums.speedlife.net/t/no-reverse/198910/22 "2008-09-02T14:11:45Z")
> [@Possible F-Body Project](https://forums.speedlife.net/t/possible-f-body-project/37680/4): > > its ok… he works on dsm’s. > > u have linkage, only honda that has cables are prelude/accord/rsx lol my bad. i’m def. not a honda guy. i wasn’t sure if there were adjustments at the shifter as well as the linkage. ---
**Author:** ![bald1one](https://avatars.discourse-cdn.com/v4/letter/b/9de053/32.png) [@bald1one](https://forums.speedlife.net/u/bald1one)\ **Post date:** [September 3, 2008, 7:57am UTC](https://forums.speedlife.net/t/no-reverse/198910/23 "2008-09-03T07:57:30Z")
its all good thanks tho! ---
**Author:** ![bald1one](https://avatars.discourse-cdn.com/v4/letter/b/9de053/32.png) [@bald1one](https://forums.speedlife.net/u/bald1one)\ **Post date:** [October 24, 2008, 6:02am UTC](https://forums.speedlife.net/t/no-reverse/198910/24 "2008-10-24T06:02:55Z")
Anyone have a stock integra shift linkage that is not bent i can borrow to compare to mine to see if its bent??? ---
**Author:** ![dyingwish](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/dyingwish/32/6041_2.png) [@dyingwish](https://forums.speedlife.net/u/dyingwish)\ **Post date:** [October 24, 2008, 6:19am UTC](https://forums.speedlife.net/t/no-reverse/198910/25 "2008-10-24T06:19:24Z")
I might, I’ll check when I get home. Would you need both the “change” rod AND the stabilizer rod? If so I would only have the change rod. ---
**Author:** ![Bswaptcivic](https://avatars.discourse-cdn.com/v4/letter/b/b782af/32.png) [@Bswaptcivic](https://forums.speedlife.net/u/Bswaptcivic)\ **Post date:** [October 24, 2008, 6:23am UTC](https://forums.speedlife.net/t/no-reverse/198910/26 "2008-10-24T06:23:24Z")
> [@halsted communication a home service for direct tv](https://forums.speedlife.net/t/halsted-communication-a-home-service-for-direct-tv/38430/17): > > Anyone have a stock integra shift linkage that is not bent i can borrow to compare to mine to see if its bent??? i do, let me know if you need it ---
**Author:** ![bald1one](https://avatars.discourse-cdn.com/v4/letter/b/9de053/32.png) [@bald1one](https://forums.speedlife.net/u/bald1one)\ **Post date:** [October 24, 2008, 6:57am UTC](https://forums.speedlife.net/t/no-reverse/198910/27 "2008-10-24T06:57:59Z")
> [@CRX\>stage 2 SRT4](https://forums.speedlife.net/t/crx-stage-2-srt4/37965/465): > > I might, I’ll check when I get home. Would you need both the “change” rod AND the stabilizer rod? If so I would only have the change rod. i dont know…you think its possible for them both to bent? > [@CRX\>stage 2 SRT4](https://forums.speedlife.net/t/crx-stage-2-srt4/37965/468): > > i do, let me know if you need it where you located?? ---
**Author:** ![dyingwish](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/dyingwish/32/6041_2.png) [@dyingwish](https://forums.speedlife.net/u/dyingwish)\ **Post date:** [October 24, 2008, 9:01am UTC](https://forums.speedlife.net/t/no-reverse/198910/28 "2008-10-24T09:01:53Z")
> [@STi vs civic vs GTi (NSFW on post #222)](https://forums.speedlife.net/t/sti-vs-civic-vs-gti-nsfw-on-post-222/38452/13): > > i dont know…you think its possible for them both to bent? Nope, the stabilizer bar hugs the tranny tunnel pretty closely and is bolted/bushing’d at both ends…if you bent that, you just might be wrapped around a telephone pole. Is it at all possible that the bitch-pin connection on the actual change rod is toast? Even though the pin is present, the hole in both the tranny input and the change rod ovalize over time…making for excessive slop in the linkage. It gets commonly misdiagnosed as bushing slop, but doesn’t go away with new poly bushings. No real way to know for sure unless you replace the change rod, and buy a new bitch pin. ---
**Author:** ![bald1one](https://avatars.discourse-cdn.com/v4/letter/b/9de053/32.png) [@bald1one](https://forums.speedlife.net/u/bald1one)\ **Post date:** [October 24, 2008, 9:09am UTC](https://forums.speedlife.net/t/no-reverse/198910/29 "2008-10-24T09:09:48Z")
> [@STi vs civic vs GTi (NSFW on post #222)](https://forums.speedlife.net/t/sti-vs-civic-vs-gti-nsfw-on-post-222/38452/31): > > Nope, the stabilizer bar hugs the tranny tunnel pretty closely and is bolted/bushing’d at both ends…if you bent that, you just might be wrapped around a telephone pole. > > Is it at all possible that the bitch-pin connection on the actual change rod is toast? Even though the pin is present, the hole in both the tranny input and the change rod ovalize over time…making for excessive slop in the linkage. It gets commonly misdiagnosed as bushing slop, but doesn’t go away with new poly bushings. No real way to know for sure unless you replace the change rod, and buy a new bitch pin. could be…doubt it tho everything feels pretty tight. where you located? ---
**Author:** ![dyingwish](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/dyingwish/32/6041_2.png) [@dyingwish](https://forums.speedlife.net/u/dyingwish)\ **Post date:** [October 24, 2008, 10:08am UTC](https://forums.speedlife.net/t/no-reverse/198910/30 "2008-10-24T10:08:43Z")
I’m down in pittsburgh. The problem is it isn’t something you can readily feel. There is always a bit of play in that change rod, otherwise your shifter wouldn’t move in neutral. It’s pretty sublte. Use a punch and push out the bitch pin, then take a look at how eccentric the holes have become. I’d image that drag racing would accelerate the wear due to faster than normal shifting… ---
**Author:** ![imported\_gearhead](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/imported_gearhead/32/5957_2.png) [@imported\_gearhead](https://forums.speedlife.net/u/imported_gearhead)\ **Post date:** [October 24, 2008, 10:16am UTC](https://forums.speedlife.net/t/no-reverse/198910/31 "2008-10-24T10:16:31Z")
… I dont know, i shifted it and it sure feels like a fork or something in the trans. every other gear is smooth sailing. ---
**Author:** ![bald1one](https://avatars.discourse-cdn.com/v4/letter/b/9de053/32.png) [@bald1one](https://forums.speedlife.net/u/bald1one)\ **Post date:** [October 24, 2008, 10:31am UTC](https://forums.speedlife.net/t/no-reverse/198910/32 "2008-10-24T10:31:44Z")
> [@WTB CRX seats](https://forums.speedlife.net/t/wtb-crx-seats/37255/19): > > … I dont know, i shifted it and it sure feels like a fork or something in the trans. every other gear is smooth sailing. crushing my hopes man :crying: ---
**Author:** ![imported\_gearhead](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/imported_gearhead/32/5957_2.png) [@imported\_gearhead](https://forums.speedlife.net/u/imported_gearhead)\ **Post date:** [October 24, 2008, 11:04am UTC](https://forums.speedlife.net/t/no-reverse/198910/33 "2008-10-24T11:04:11Z")
i mean, we can get under there with a sledge and MAKE It go into reverse if you want 👼 ---
**Author:** ![dyingwish](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/dyingwish/32/6041_2.png) [@dyingwish](https://forums.speedlife.net/u/dyingwish)\ **Post date:** [October 24, 2008, 1:27pm UTC](https://forums.speedlife.net/t/no-reverse/198910/34 "2008-10-24T13:27:57Z")
lol, BFH = cure for everything ---
**Author:** ![spoolinsteve](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/spoolinsteve/32/6026_2.png) [@spoolinsteve](https://forums.speedlife.net/u/spoolinsteve)\ **Post date:** [October 24, 2008, 1:33pm UTC](https://forums.speedlife.net/t/no-reverse/198910/35 "2008-10-24T13:33:47Z")
Il throw something else in the mix that probably wont work. I know on talons when you fill the tranny up via taking the reverse switch out on top of the tranny… if you forget the crush washer type deal (~1mm) on the switch then it sticks too far into the shift rods jamming you either out of 5th or reverse depending on which you go into first. I hope you have good luck figuring it out and its not too serious baldy. ---
**Author:** ![Bswaptcivic](https://avatars.discourse-cdn.com/v4/letter/b/b782af/32.png) [@Bswaptcivic](https://forums.speedlife.net/u/Bswaptcivic)\ **Post date:** [October 24, 2008, 1:39pm UTC](https://forums.speedlife.net/t/no-reverse/198910/36 "2008-10-24T13:39:42Z")
> [@STi vs civic vs GTi (NSFW on post #222)](https://forums.speedlife.net/t/sti-vs-civic-vs-gti-nsfw-on-post-222/38452/13): > > where you located?? about 2 minutes away from monroeville ---
**Author:** ![bald1one](https://avatars.discourse-cdn.com/v4/letter/b/9de053/32.png) [@bald1one](https://forums.speedlife.net/u/bald1one)\ **Post date:** [October 24, 2008, 1:54pm UTC](https://forums.speedlife.net/t/no-reverse/198910/37 "2008-10-24T13:54:34Z")
> [@Hi, plz read me, k thanks. PS. Free hoodie.](https://forums.speedlife.net/t/hi-plz-read-me-k-thanks-ps-free-hoodie/38425/148): > > Il throw something else in the mix that probably wont work. I know on talons when you fill the tranny up via taking the reverse switch out on top of the tranny… if you forget the crush washer type deal (~1mm) on the switch then it sticks too far into the shift rods jamming you either out of 5th or reverse depending on which you go into first. > > I hope you have good luck figuring it out and its not too serious baldy. thanks man…like i said its not a huge deal…if its broke, it gives me more defense to talk my woman into letting me get new Mfactory gears :bigthumb: > [@STi vs civic vs GTi (NSFW on post #222)](https://forums.speedlife.net/t/sti-vs-civic-vs-gti-nsfw-on-post-222/38452/38): > > lol, BFH = cure for everything nothing works better than the big pursuaider :blue: [Previous page](https://forums.speedlife.net/t/no-reverse/198910.md?page=1)