# O-Rings.   Who has the best selection???

**URL:** <https://forums.speedlife.net/t/o-rings-who-has-the-best-selection/258385>\
**Category:** Shift518 Off Topic\
**Created:** [May 13, 2011, 11:15am UTC](https://forums.speedlife.net/t/o-rings-who-has-the-best-selection/258385 "2011-05-13T11:15:40Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![KrazyKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/krazykid/32/6371_2.png) [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)\
**Post date:** [May 13, 2011, 11:15am UTC](https://forums.speedlife.net/t/o-rings-who-has-the-best-selection/258385/1 "2011-05-13T11:15:40Z")

</div>

I cleaned a paint gun last night and one of the little o-rings ran away and the floor monster eat it.

Who has the best selection local for small o-rings? True value? Maybe Hobby Town for rc car parts (shock shafts etc)?

its about 3MM inside dia or so. It slides over the needle.

---

<div class="post-metadata">

**Author:** ![ReDevil](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/redevil/32/6385_2.png) [@ReDevil](https://forums.speedlife.net/u/ReDevil)\
**Post date:** [May 13, 2011, 11:16am UTC](https://forums.speedlife.net/t/o-rings-who-has-the-best-selection/258385/2 "2011-05-13T11:16:44Z")

</div>

Uranus

But seriously, Hobby Town has shock rebuild kits, that would have that in there.

---

<div class="post-metadata">

**Author:** ![jdaniels](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jdaniels/32/6399_2.png) [@jdaniels](https://forums.speedlife.net/u/jdaniels)\
**Post date:** [May 13, 2011, 11:27am UTC](https://forums.speedlife.net/t/o-rings-who-has-the-best-selection/258385/3 "2011-05-13T11:27:21Z")

</div>

Harbor Freight has quite the selection. Don’t forget that material composition is just as important as fit, putting a butyl rubber o-ring in a paint gun isn’t going to hold up all that well. I’m pretty sure that autobody shops sell the proper o-rings you would need as well…

---

<div class="post-metadata">

**Author:** ![RTrac1](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/rtrac1/32/6312_2.png) [@RTrac1](https://forums.speedlife.net/u/RTrac1)\
**Post date:** [May 13, 2011, 11:33am UTC](https://forums.speedlife.net/t/o-rings-who-has-the-best-selection/258385/4 "2011-05-13T11:33:33Z")

</div>

i bet tractor supply has a shit ton

---

<div class="post-metadata">

**Author:** ![KrazyKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/krazykid/32/6371_2.png) [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)\
**Post date:** [May 13, 2011, 12:00pm UTC](https://forums.speedlife.net/t/o-rings-who-has-the-best-selection/258385/5 "2011-05-13T12:00:37Z")

</div>

werd to big bird. I will be on the prowl for some rings after work.

I just ordered a rebuild kit for the gun anyways since its a few years old, it will come with the right one again. but until then I will put something in there to keep it from leaking too bad.

---

<div class="post-metadata">

**Author:** ![JVG](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jvg/32/6348_2.png) [@JVG](https://forums.speedlife.net/u/JVG)\
**Post date:** [May 13, 2011, 12:56pm UTC](https://forums.speedlife.net/t/o-rings-who-has-the-best-selection/258385/6 "2011-05-13T12:56:30Z")

</div>

> [@Random Picture Thread](https://forums.speedlife.net/t/random-picture-thread/34324/244):
>
> I cleaned a paint gun last night and one of the little o-rings ran away and the floor monster eat it.
> 
> Who has the best selection local for small o-rings? True value? Maybe Hobby Town for rc car parts (shock shafts etc)?
> 
> its about 3MM inside dia or so. It slides over the needle.

schnectady or albany autobody store