# off road mid pipes and exhaust **URL:** \ **Category:** PittSpeed Automotive\ **Created:** [August 17, 2008, 7:08pm UTC](https://forums.speedlife.net/t/off-road-mid-pipes-and-exhaust/199093 "2008-08-17T19:08:21Z")\ **Posts on this page:** 9\ **Page:** 1
**Author:** ![realcobra96](https://avatars.discourse-cdn.com/v4/letter/r/3ec8ea/32.png) [@realcobra96](https://forums.speedlife.net/u/realcobra96)\ **Post date:** [August 17, 2008, 7:08pm UTC](https://forums.speedlife.net/t/off-road-mid-pipes-and-exhaust/199093/1 "2008-08-17T19:08:21Z")
Are there any shops Sponsors around that could make a custom o/r Y pipe for dakota or my buddy’s 08 silverado? i have magnapacks and he has SLP LM1. I cant find anything on the internet and are there MILs for these trucks like the mustangs? And Are there any shops (sponsors) that would do a CATless exhaust on my brothers 77’ vette. Every shop says the blah blah since it came with them they have to be on there:wackit: thats not happenin.? thanks Jake ---
**Author:** ![SPC\_Wright](https://avatars.discourse-cdn.com/v4/letter/s/e36b37/32.png) [@SPC\_Wright](https://forums.speedlife.net/u/SPC_Wright)\ **Post date:** [August 17, 2008, 8:12pm UTC](https://forums.speedlife.net/t/off-road-mid-pipes-and-exhaust/199093/2 "2008-08-17T20:12:16Z")
I cut my own off, and just slipped a cutout where the cat used to be. It isn’t hard to do if you have a sabre saw or cutting wheel. Where are you located at? Maybe I can help ya with the “catless” part. You may wanna give Jeff a buzz over at 1st Try. I know he usually keeps busy, but maybe he can assist with the ORY. ---
**Author:** ![Zack01GC](https://avatars.discourse-cdn.com/v4/letter/z/a183cd/32.png) [@Zack01GC](https://forums.speedlife.net/u/Zack01GC)\ **Post date:** [August 17, 2008, 10:09pm UTC](https://forums.speedlife.net/t/off-road-mid-pipes-and-exhaust/199093/3 "2008-08-17T22:09:40Z")
1st Try ---
**Author:** ![Shaggy](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shaggy/32/5945_2.png) [@Shaggy](https://forums.speedlife.net/u/Shaggy)\ **Post date:** [August 17, 2008, 10:35pm UTC](https://forums.speedlife.net/t/off-road-mid-pipes-and-exhaust/199093/4 "2008-08-17T22:35:43Z")
In no particular order 1st try engineering - Jeff @ 412-596-6730 ---
**Author:** ![realcobra96](https://avatars.discourse-cdn.com/v4/letter/r/3ec8ea/32.png) [@realcobra96](https://forums.speedlife.net/u/realcobra96)\ **Post date:** [August 18, 2008, 1:42am UTC](https://forums.speedlife.net/t/off-road-mid-pipes-and-exhaust/199093/5 "2008-08-18T01:42:38Z")
alright thanks I’ll give them a call I’m in 84, which is in washington county. ---
**Author:** ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)\ **Post date:** [August 18, 2008, 5:30am UTC](https://forums.speedlife.net/t/off-road-mid-pipes-and-exhaust/199093/6 "2008-08-18T05:30:15Z")
1st try engineering - Jeff @ 412-596-6730 ---
**Author:** ![flyinglow57](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/flyinglow57/32/5978_2.png) [@flyinglow57](https://forums.speedlife.net/u/flyinglow57)\ **Post date:** [August 18, 2008, 1:22pm UTC](https://forums.speedlife.net/t/off-road-mid-pipes-and-exhaust/199093/7 "2008-08-18T13:22:46Z")
jeff just did basically the same thing for me. but he did it with one of my mufflers… took him about an hour and that was with us BSing quite a bit. fuckin looks awesome and professional underneath. all welded better then i would ever have thought. darn resonable also. not much more money then me going and getting the pipe cutting it down and trying to weld it myself. ---
**Author:** ![Dominator](https://avatars.discourse-cdn.com/v4/letter/d/a4c791/32.png) [@Dominator](https://forums.speedlife.net/u/Dominator)\ **Post date:** [August 18, 2008, 2:27pm UTC](https://forums.speedlife.net/t/off-road-mid-pipes-and-exhaust/199093/8 "2008-08-18T14:27:56Z")
> [@FS/FT: 1987-1993 Mustang Mach1 cowl hood](https://forums.speedlife.net/t/fs-ft-1987-1993-mustang-mach1-cowl-hood/37490/6): > > In no particular order > > 1st try engineering - Jeff @ 412-596-6730 👼 😃 ---
**Author:** ![realcobra96](https://avatars.discourse-cdn.com/v4/letter/r/3ec8ea/32.png) [@realcobra96](https://forums.speedlife.net/u/realcobra96)\ **Post date:** [August 18, 2008, 6:37pm UTC](https://forums.speedlife.net/t/off-road-mid-pipes-and-exhaust/199093/9 "2008-08-18T18:37:58Z")
nice does anyone know where to get the MIL’s for chevy’s and dodge’s? ive done some seardching but really cant find much other than the fords are the chevy’s inline plug in like the stang’s or do you have to do some wiring?