# \-OFFICIAL- NYSpeed Rolling/Rig Shot Meet - DATE PENDING **URL:** \ **Category:** NYSpeed Automotive\ **Created:** [September 1, 2011, 2:17pm UTC](https://forums.speedlife.net/t/official-nyspeed-rolling-rig-shot-meet-date-pending/216108 "2011-09-01T14:17:01Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![ItsOver](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/itsover/32/5431_2.png) [@ItsOver](https://forums.speedlife.net/u/ItsOver)\ **Post date:** [September 1, 2011, 2:17pm UTC](https://forums.speedlife.net/t/official-nyspeed-rolling-rig-shot-meet-date-pending/216108/1 "2011-09-01T14:17:01Z")
So, you guys have probably seen the rig shots that Onyx had me shoot for the site banner. He approached me to do more shots, during the day, and turn it into an official NYSpeed meet. I will be offering a special NYSpeed group rate for the day. $50 for a set of fully edited rig shots (I’ll be charging $75 for the same package, except at this event). Also, I guarantee at least 5 fully edited rolling shots, along with a few still shots. Likely ~10 edited, print-quality photos. If you would like to sign up for a certain time slot, I’m aiming for hourly time slots. If any of the shoots go faster, we can move your shoot up, or fit more people in. The meet is going to be held at Front Park on September 11, 2011. Tentative rain date is September 18th. ![http://farm7.static.flickr.com/6074/6103856355_49738ff43d_b.jpg](http://farm7.static.flickr.com/6074/6103856355_49738ff43d_b.jpg) ![http://farm7.static.flickr.com/6071/6104401790_e007fb36ed_b.jpg](http://farm7.static.flickr.com/6071/6104401790_e007fb36ed_b.jpg) ---
**Author:** ![Jack](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jack/32/7613_2.png) [@Jack](https://forums.speedlife.net/u/Jack)\ **Post date:** [September 1, 2011, 3:06pm UTC](https://forums.speedlife.net/t/official-nyspeed-rolling-rig-shot-meet-date-pending/216108/2 "2011-09-01T15:06:22Z")
Sounds like a plan! ---
**Author:** ![1QIKZ](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/1qikz/32/6112_2.png) [@1QIKZ](https://forums.speedlife.net/u/1QIKZ)\ **Post date:** [September 1, 2011, 3:40pm UTC](https://forums.speedlife.net/t/official-nyspeed-rolling-rig-shot-meet-date-pending/216108/3 "2011-09-01T15:40:32Z")
> [@Jack](#): > > Sounds like a plan! He’s taking pictures of people’s cars, not you. ---
**Author:** ![Jimshorts](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jimshorts/32/5915_2.png) [@Jimshorts](https://forums.speedlife.net/u/Jimshorts)\ **Post date:** [September 1, 2011, 4:20pm UTC](https://forums.speedlife.net/t/official-nyspeed-rolling-rig-shot-meet-date-pending/216108/4 "2011-09-01T16:20:12Z")
wish i could make it but ill be in Boston ---
**Author:** ![Onyx\_Z32](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/onyx_z32/32/7581_2.png) [@Onyx\_Z32](https://forums.speedlife.net/u/Onyx_Z32)\ **Post date:** [September 1, 2011, 8:47pm UTC](https://forums.speedlife.net/t/official-nyspeed-rolling-rig-shot-meet-date-pending/216108/5 "2011-09-01T20:47:05Z")
This really is official BTW. Shots may be used at the top of the forum too! ---
**Author:** ![91MR2](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/91mr2/32/7217_2.png) [@91MR2](https://forums.speedlife.net/u/91MR2)\ **Post date:** [September 2, 2011, 5:02am UTC](https://forums.speedlife.net/t/official-nyspeed-rolling-rig-shot-meet-date-pending/216108/6 "2011-09-02T05:02:57Z")
Prob. be there… ---
**Author:** ![Onyx\_Z32](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/onyx_z32/32/7581_2.png) [@Onyx\_Z32](https://forums.speedlife.net/u/Onyx_Z32)\ **Post date:** [September 2, 2011, 6:07am UTC](https://forums.speedlife.net/t/official-nyspeed-rolling-rig-shot-meet-date-pending/216108/7 "2011-09-02T06:07:56Z")
^^^ Better be there. You have 3 cars! 🙂 ---
**Author:** ![turbod\_ss](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/turbod_ss/32/5352_2.png) [@turbod\_ss](https://forums.speedlife.net/u/turbod_ss)\ **Post date:** [September 2, 2011, 6:27am UTC](https://forums.speedlife.net/t/official-nyspeed-rolling-rig-shot-meet-date-pending/216108/8 "2011-09-02T06:27:59Z")
does this include bikes? ---
**Author:** ![JayS](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jays/32/15375_2.png) [@JayS](https://forums.speedlife.net/u/JayS)\ **Post date:** [September 2, 2011, 6:30am UTC](https://forums.speedlife.net/t/official-nyspeed-rolling-rig-shot-meet-date-pending/216108/9 "2011-09-02T06:30:10Z")
I’ll be at the Nelson Ledges track day. ---
**Author:** ![yamba6](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/yamba6/32/5161_2.png) [@yamba6](https://forums.speedlife.net/u/yamba6)\ **Post date:** [September 2, 2011, 8:51am UTC](https://forums.speedlife.net/t/official-nyspeed-rolling-rig-shot-meet-date-pending/216108/10 "2011-09-02T08:51:29Z")
In to see different angles and not all the same. ---
**Author:** ![ItsOver](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/itsover/32/5431_2.png) [@ItsOver](https://forums.speedlife.net/u/ItsOver)\ **Post date:** [September 2, 2011, 10:32am UTC](https://forums.speedlife.net/t/official-nyspeed-rolling-rig-shot-meet-date-pending/216108/11 "2011-09-02T10:32:09Z")
> [@turbod ss](#): > > does this include bikes? Depending on my ability to get two suction cups to stick to your bike, and your ability to keep your bike up and straight at a slow speed, possibly. > [@yeamabu](#): > > In to see different angles and not all the same. They were only the same last time because of what Josh needed for the banner. Anyone joining in will have more angles, along with the banner angle. ---
**Author:** ![yamba6](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/yamba6/32/5161_2.png) [@yamba6](https://forums.speedlife.net/u/yamba6)\ **Post date:** [September 2, 2011, 10:38am UTC](https://forums.speedlife.net/t/official-nyspeed-rolling-rig-shot-meet-date-pending/216108/12 "2011-09-02T10:38:07Z")
> [@ItsOver](#): > > They were only the same last time because of what Josh needed for the banner. Anyone joining in will have more angles, along with the banner angle. Interested in seeing these when they are done. Wasnt trying to blow up your spot but different angles could always be a sweet thing to see. hell one mounted straight on would look sweet in a tunnel setting if you could ---
**Author:** ![Paulo](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/paulo/32/7328_2.png) [@Paulo](https://forums.speedlife.net/u/Paulo)\ **Post date:** [September 2, 2011, 10:40am UTC](https://forums.speedlife.net/t/official-nyspeed-rolling-rig-shot-meet-date-pending/216108/13 "2011-09-02T10:40:30Z")
Not sure how you could attach the cups to a bike in a way that you’ll be able to edit them out afterwards. But this is assuming you have a typical set up with one long pole and two suction cups that are mounted directly to it. ---
**Author:** ![rugsr](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/rugsr/32/7474_2.png) [@rugsr](https://forums.speedlife.net/u/rugsr)\ **Post date:** [September 2, 2011, 11:19am UTC](https://forums.speedlife.net/t/official-nyspeed-rolling-rig-shot-meet-date-pending/216108/14 "2011-09-02T11:19:38Z")
Maybe something could be built off the bike and the cups onto that. I know sliders bolt low. I came up with this real quick but maybe this would work. (I have NO IDEA if this would be safe for the bike/rider/camera…just saying) If something like this would work, I cant imagine it being to hard to make / install Looking at it a 2nd time, insted of the “board” being in the horizontal and being at an upper angle, if the “board” was in the vertical, the cups could be mounted on the side of it ![http://img.photobucket.com/albums/v738/rugsr/bikecameramount1.jpg](http://img.photobucket.com/albums/v738/rugsr/bikecameramount1.jpg) ![http://img.photobucket.com/albums/v738/rugsr/bikecameramount2.jpg](http://img.photobucket.com/albums/v738/rugsr/bikecameramount2.jpg) ---
**Author:** ![ItsOver](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/itsover/32/5431_2.png) [@ItsOver](https://forums.speedlife.net/u/ItsOver)\ **Post date:** [September 2, 2011, 11:22am UTC](https://forums.speedlife.net/t/official-nyspeed-rolling-rig-shot-meet-date-pending/216108/15 "2011-09-02T11:22:20Z")
> [@Paulo](#): > > Not sure how you could attach the cups to a bike in a way that you’ll be able to edit them out afterwards. But this is assuming you have a typical set up with one long pole and two suction cups that are mounted directly to it. Worst case scenario: take a shot of the bike from the same angle, as a still. Crop it to cover the suction cups, then color correct and blend. (A few of the banner shots had suction cups over hood scoops and curves, I wish I would have done this). I’m more nervous about keeping the bike straight and the rig mounted. ---------- Post added at 02:22 PM ---------- Previous post was at 02:20 PM ---------- > [@rugsr](#): > > Maybe something could be built off the bike and the cups onto that. I know sliders bolt low. > I came up with this real quick but maybe this would work. > (I have NO IDEA if this would be safe for the bike/rider/camera…just saying) > If something like this would work, I cant imagine it being to hard to make / install > Looking at it a 2nd time, insted of the “board” being in the horizontal and being at an upper angle, if the “board” was in the vertical, the cups could be mounted on the side of it Put the bike on two of those rolling stands and push it! lol ---
**Author:** ![Onyx\_Z32](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/onyx_z32/32/7581_2.png) [@Onyx\_Z32](https://forums.speedlife.net/u/Onyx_Z32)\ **Post date:** [September 3, 2011, 5:46am UTC](https://forums.speedlife.net/t/official-nyspeed-rolling-rig-shot-meet-date-pending/216108/16 "2011-09-03T05:46:40Z")
Get 2 bikes and put 1 suction cup on each! ---
**Author:** ![dpm90iroc](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/dpm90iroc/32/4966_2.png) [@dpm90iroc](https://forums.speedlife.net/u/dpm90iroc)\ **Post date:** [September 3, 2011, 8:04am UTC](https://forums.speedlife.net/t/official-nyspeed-rolling-rig-shot-meet-date-pending/216108/17 "2011-09-03T08:04:07Z")
Want to do this, will have to pay u for another date, racing @ Empire in the Mom’s event. ---
**Author:** ![Slaw](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/slaw/32/5313_2.png) [@Slaw](https://forums.speedlife.net/u/Slaw)\ **Post date:** [September 3, 2011, 5:26pm UTC](https://forums.speedlife.net/t/official-nyspeed-rolling-rig-shot-meet-date-pending/216108/18 "2011-09-03T17:26:55Z")
wish i had a car legit enough for this ---
**Author:** ![Minglor](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/minglor/32/7373_2.png) [@Minglor](https://forums.speedlife.net/u/Minglor)\ **Post date:** [September 3, 2011, 5:50pm UTC](https://forums.speedlife.net/t/official-nyspeed-rolling-rig-shot-meet-date-pending/216108/19 "2011-09-03T17:50:16Z")
> [@Onyx Z32](#): > > Get 2 bikes and put 1 suction cup on each! 2 girls 1 cup? ---
**Author:** ![honda4life](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/honda4life/32/5300_2.png) [@honda4life](https://forums.speedlife.net/u/honda4life)\ **Post date:** [September 4, 2011, 6:28am UTC](https://forums.speedlife.net/t/official-nyspeed-rolling-rig-shot-meet-date-pending/216108/20 "2011-09-04T06:28:05Z")
Kb! whole shit dude! I saw that pic you did if nick checkos eg sedan, omfg dude it was awesome! you did a great job! I wish I had a few bucks to have my car done, I just want one shot really, :bigtup: for you tho [Next page](https://forums.speedlife.net/t/official-nyspeed-rolling-rig-shot-meet-date-pending/216108.md?page=2)