# «OFFICIAL» Watercraft / Jet Ski / PWC Thread + Boats

**URL:** https://forums.speedlife.net/t/official-watercraft-jet-ski-pwc-thread-boats/269132
**Category:** NYSpeed Automotive
**Created:** [April 22, 2014, 4:58pm UTC](https://forums.speedlife.net/t/official-watercraft-jet-ski-pwc-thread-boats/269132 "2014-04-22T16:58:19Z")
**Posts on this page:** 20
**Page:** 41

<div class="post-metadata">

### Author: ![Onyx\_Z32](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/onyx_z32/32/7581_2.png) [@Onyx\_Z32](https://forums.speedlife.net/u/Onyx_Z32)
#### Post date: [May 12, 2016, 7:07am UTC](https://forums.speedlife.net/t/official-watercraft-jet-ski-pwc-thread-boats/269132/801 "2016-05-12T07:07:41Z")

</div>

> [@SOLITUDE](#):
>
> Did you buy yours offline? That’s one thing that worries me is the sizing and what not. I have not even looked into them yet.

Bought online. I measured myself and watched a bunch of YouTube videos on proper fit. I managed to get one that’s perfect I think, but I haven’t gotten it wet yet so we’ll see how it works. But all the fitment checks are perfect for checking a suit when it’s dry.

The thing I found is that sometimes you have to jump around brands since they all offer different sizes, half sizes & measurements. It’s proving tougher to find one for my gf than it was for me.

Also don’t get a diving suit, get a surfing suit.

---

<div class="post-metadata">

### Author: ![SOLITUDE](https://avatars.discourse-cdn.com/v4/letter/s/c37758/32.png) [@SOLITUDE](https://forums.speedlife.net/u/SOLITUDE)
#### Post date: [May 12, 2016, 1:20pm UTC](https://forums.speedlife.net/t/official-watercraft-jet-ski-pwc-thread-boats/269132/802 "2016-05-12T13:20:07Z")

</div>

> [@Onyx Z32](#):
>
> Bought online. I measured myself and watched a bunch of YouTube videos on proper fit. I managed to get one that’s perfect I think, but I haven’t gotten it wet yet so we’ll see how it works. But all the fitment checks are perfect for checking a suit when it’s dry.
> 
> The thing I found is that sometimes you have to jump around brands since they all offer different sizes, half sizes & measurements. It’s proving tougher to find one for my gf than it was for me.
> 
> Also don’t get a diving suit, get a surfing suit.

Well Ill keep that in mind. I am pretty busy anyways so its going to be a bit before I get out again.

---

<div class="post-metadata">

### Author: ![Onyx\_Z32](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/onyx_z32/32/7581_2.png) [@Onyx\_Z32](https://forums.speedlife.net/u/Onyx_Z32)
#### Post date: [May 16, 2016, 5:39pm UTC](https://forums.speedlife.net/t/official-watercraft-jet-ski-pwc-thread-boats/269132/803 "2016-05-16T17:39:16Z")

</div>

This Sunday is the huge PWC meet in Toronto for those interested. I can’t make it though:

> [@Onyx Z32](#):
>
> … Also if any of the PWC guys are interested in a huge cruise through Toronto inner harbor there is one happening on May 22nd. 100+ skis expected: [http://www.torontopwc.com/#!Great-Canadian-Jetski-Cruise-May-22nd-BOOK-IT/d4dwn/56ba58ea0cf2b4e0b622ce9c](http://www.torontopwc.com/#!Great-Canadian-Jetski-Cruise-May-22nd-BOOK-IT/d4dwn/56ba58ea0cf2b4e0b622ce9c)
> 
> You usually need a special license to ride in that area but the group going will have a police escort so it’s all set.
> 
> ![https://static.wixstatic.com/media/c03665_b4625644deea4e7aa73061c5e217ec16.png/v1/fill/w_1274,h_576,al_c,usm_0.66_1.00_0.01/c03665_b4625644deea4e7aa73061c5e217ec16.png](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/3X/0/2/02121c8ba5b4774bab4357a5863674f3bcfd0b7e.png)
> 
> ![https://static.wixstatic.com/media/c03665_8cf4897ac0a847b78b1122daf1558dfa.jpg/v1/fill/w_956,h_717,al_c,q_85,usm_0.66_1.00_0.01/c03665_8cf4897ac0a847b78b1122daf1558dfa.jpg](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/3X/d/2/d2b761ca97cb94a957410f13adea870be3438de5.jpeg)
> 
> ![https://static.wixstatic.com/media/c03665_7727ced9bcb747f0a542290ac41c7acc.jpg/v1/fill/w_956,h_717,al_c,q_85,usm_0.66_1.00_0.01/c03665_7727ced9bcb747f0a542290ac41c7acc.jpg](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/3X/1/a/1a669fa8c3bf2f2d74b67039ff6afdd0e6aa2fdb.jpeg)

---

<div class="post-metadata">

### Author: ![Onyx\_Z32](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/onyx_z32/32/7581_2.png) [@Onyx\_Z32](https://forums.speedlife.net/u/Onyx_Z32)
#### Post date: [May 19, 2016, 7:10am UTC](https://forums.speedlife.net/t/official-watercraft-jet-ski-pwc-thread-boats/269132/804 "2016-05-19T07:10:46Z")

</div>

Monday:

 ![http://www.nyspeed.com/pictures/monday.jpg](http://www.nyspeed.com/pictures/monday.jpg)

Also they’re cleaning up Gallagher and digging out the sand to put in the docks:

 ![http://www.nyspeed.com/pictures/gallagher2016.jpg](http://www.nyspeed.com/pictures/gallagher2016.jpg)

---

<div class="post-metadata">

### Author: ![Onyx\_Z32](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/onyx_z32/32/7581_2.png) [@Onyx\_Z32](https://forums.speedlife.net/u/Onyx_Z32)
#### Post date: [May 25, 2016, 6:53pm UTC](https://forums.speedlife.net/t/official-watercraft-jet-ski-pwc-thread-boats/269132/805 "2016-05-25T18:53:34Z")

</div>

I was out with both skis today jumping waves :tup:

Water wasn’t cold, more like “refreshing.”

Watched several boats take the turn out from the outer harbor, only to turn right around because of the waves.

---

<div class="post-metadata">

### Author: ![97eclipse](https://avatars.discourse-cdn.com/v4/letter/9/a88e4f/32.png) [@97eclipse](https://forums.speedlife.net/u/97eclipse)
#### Post date: [May 26, 2016, 10:11am UTC](https://forums.speedlife.net/t/official-watercraft-jet-ski-pwc-thread-boats/269132/806 "2016-05-26T10:11:17Z")

</div>

Launch at Gallagher? I wasn’t sure if it would be open for the weekend. Hot temps during the day and warm nights i’m hoping bring the lake temp up to the low 60’s. Going to try and splash the ski saturday. Anyone else plan on getting out this weekend?

---

<div class="post-metadata">

### Author: ![JayS](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jays/32/15375_2.png) [@JayS](https://forums.speedlife.net/u/JayS)
#### Post date: [May 26, 2016, 11:28am UTC](https://forums.speedlife.net/t/official-watercraft-jet-ski-pwc-thread-boats/269132/807 "2016-05-26T11:28:45Z")

</div>

Should be out with the new boat Saturday evening, starting from Niawanda Park.

---

<div class="post-metadata">

### Author: ![turbo\_ls1\_ss](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/turbo_ls1_ss/32/7303_2.png) [@turbo\_ls1\_ss](https://forums.speedlife.net/u/turbo_ls1_ss)
#### Post date: [May 26, 2016, 12:19pm UTC](https://forums.speedlife.net/t/official-watercraft-jet-ski-pwc-thread-boats/269132/808 "2016-05-26T12:19:17Z")

</div>

Just picked up the boat from dewinterization. Taking a much needed day off tomorrow to clean 'er up and put it in the water. :tup:

---

<div class="post-metadata">

### Author: ![JayS](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jays/32/15375_2.png) [@JayS](https://forums.speedlife.net/u/JayS)
#### Post date: [May 26, 2016, 12:30pm UTC](https://forums.speedlife.net/t/official-watercraft-jet-ski-pwc-thread-boats/269132/809 "2016-05-26T12:30:08Z")

</div>

> [@turbo ls1 ss](#):
>
> Just picked up the boat from dewinterization. Taking a much needed day off tomorrow to clean 'er up and put it in the water. :tup:

What exactly do they do to “de-winterize” it? If they winterized it properly with fresh oil and lower unit gear lube your spring startup shouldn’t involve anything more than starting it up on the hose to make sure you’re not the asshole holding everyone up at a launch when you can’t get it started. 🙂

---

<div class="post-metadata">

### Author: ![turbo\_ls1\_ss](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/turbo_ls1_ss/32/7303_2.png) [@turbo\_ls1\_ss](https://forums.speedlife.net/u/turbo_ls1_ss)
#### Post date: [May 26, 2016, 1:08pm UTC](https://forums.speedlife.net/t/official-watercraft-jet-ski-pwc-thread-boats/269132/810 "2016-05-26T13:08:19Z")

</div>

Lube, install freshened up props, put the doghouse back together, paint the bottom of the boat, and a few other odds and ends.

---

<div class="post-metadata">

### Author: ![Onyx\_Z32](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/onyx_z32/32/7581_2.png) [@Onyx\_Z32](https://forums.speedlife.net/u/Onyx_Z32)
#### Post date: [May 26, 2016, 6:00pm UTC](https://forums.speedlife.net/t/official-watercraft-jet-ski-pwc-thread-boats/269132/811 "2016-05-26T18:00:41Z")

</div>

> [@97eclipse](#):
>
> Launch at Gallagher? I wasn’t sure if it would be open for the weekend. Hot temps during the day and warm nights i’m hoping bring the lake temp up to the low 60’s. Going to try and splash the ski saturday. Anyone else plan on getting out this weekend?

Gallagher jetski launch is still closed, but I have a beach cart so I just launch from the beach.

The water at Gallagher was definitely over 60 on Wednesday. On the lake it was colder.

I’ll be out maybe tomorrow, most likely Monday. :tup:

- 
  - 
    - Updated - - -

> [@JayS](#):
>
> Should be out with the new boat Saturday evening, starting from Niawanda Park.

![http://ichef-1.bbci.co.uk/news/660/media/images/76048000/jpg/_76048308_ship.jpg](http://ichef-1.bbci.co.uk/news/660/media/images/76048000/jpg/_76048308_ship.jpg)

---

<div class="post-metadata">

### Author: ![91MR2](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/91mr2/32/7217_2.png) [@91MR2](https://forums.speedlife.net/u/91MR2)
#### Post date: [May 26, 2016, 8:23pm UTC](https://forums.speedlife.net/t/official-watercraft-jet-ski-pwc-thread-boats/269132/812 "2016-05-26T20:23:47Z")

</div>

> [@Onyx Z32](#):
>
> Gallagher jetski launch is still closed…

When does it open…

---

<div class="post-metadata">

### Author: ![Onyx\_Z32](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/onyx_z32/32/7581_2.png) [@Onyx\_Z32](https://forums.speedlife.net/u/Onyx_Z32)
#### Post date: [May 27, 2016, 7:04am UTC](https://forums.speedlife.net/t/official-watercraft-jet-ski-pwc-thread-boats/269132/813 "2016-05-27T07:04:46Z")

</div>

> [@91MR2](#):
>
> When does it open…

I don’t know, but you’re allowed to launch inside the marina instead. Just enter the same entrance and turn right instead of left.

They have been doing a lot of work around the area but the launch just needs the ramps put in. Maybe it’ll be done for this weekend.

---

<div class="post-metadata">

### Author: ![JayS](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jays/32/15375_2.png) [@JayS](https://forums.speedlife.net/u/JayS)
#### Post date: [May 27, 2016, 7:13am UTC](https://forums.speedlife.net/t/official-watercraft-jet-ski-pwc-thread-boats/269132/814 "2016-05-27T07:13:33Z")

</div>

> [@Onyx Z32](#):
>
> ![http://ichef-1.bbci.co.uk/news/660/media/images/76048000/jpg/_76048308_ship.jpg](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/3X/e/6/e6e71989d2966a12c7427e5b7ad74417b2101a57.jpeg)

Had the maiden voyage Tuesday night. She does low 50’s and comes out of the hole like a rocket. Really happy with it and can’t wait for the water to warm up to try some wakeboarding and slalom skiing. This is on the stock 14.25x21 3 blade aluminum Michigan Wheel prop too, so I’ll likely be upgrading to a stainless as some point this summer. Right now the tach isn’t working (new gauge on order) so I don’t want to mess with changing props until I can get a good baseline of what this prop is pulling RPM wise.

---

<div class="post-metadata">

### Author: ![SOLITUDE](https://avatars.discourse-cdn.com/v4/letter/s/c37758/32.png) [@SOLITUDE](https://forums.speedlife.net/u/SOLITUDE)
#### Post date: [May 27, 2016, 8:34am UTC](https://forums.speedlife.net/t/official-watercraft-jet-ski-pwc-thread-boats/269132/815 "2016-05-27T08:34:12Z")

</div>

> [@Onyx Z32](#):
>
> I don’t know, but you’re allowed to launch inside the marina instead. Just enter the same entrance and turn right instead of left.
> 
> They have been doing a lot of work around the area but the launch just needs the ramps put in. Maybe it’ll be done for this weekend.

My father took a ride down this morning and apparently they have one dock in at Gallagher! Ready when you are boys.

---

<div class="post-metadata">

### Author: ![LXIFLYBY](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/lxiflyby/32/7399_2.png) [@LXIFLYBY](https://forums.speedlife.net/u/LXIFLYBY)
#### Post date: [May 27, 2016, 10:05am UTC](https://forums.speedlife.net/t/official-watercraft-jet-ski-pwc-thread-boats/269132/816 "2016-05-27T10:05:26Z")

</div>

Check the fuel filter/fuel water separator! I dumped mine this spring and found a little water in it, def not somthing I would put off doing. Easy to forget about it, out of sight-out of mind I guess, even though it only cost me $9 to change…

---

<div class="post-metadata">

### Author: ![Onyx\_Z32](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/onyx_z32/32/7581_2.png) [@Onyx\_Z32](https://forums.speedlife.net/u/Onyx_Z32)
#### Post date: [May 27, 2016, 12:24pm UTC](https://forums.speedlife.net/t/official-watercraft-jet-ski-pwc-thread-boats/269132/817 "2016-05-27T12:24:16Z")

</div>

> [@SOLITUDE](#):
>
> My father took a ride down this morning and apparently they have one dock in at Gallagher! Ready when you are boys.

I just did the same, Gallagher is open for launching :tup:

- 
  - 
    - Updated - - -

Some couches just floated by:

 ![http://www.nyspeed.com/pictures/jetski/couches.jpg](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/3X/d/7/d71fe3d3617e8725a393f049e85e3a6a01e75796.jpeg)

---

<div class="post-metadata">

### Author: ![maxwell](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/maxwell/32/6524_2.png) [@maxwell](https://forums.speedlife.net/u/maxwell)
#### Post date: [May 27, 2016, 12:24pm UTC](https://forums.speedlife.net/t/official-watercraft-jet-ski-pwc-thread-boats/269132/818 "2016-05-27T12:24:48Z")

</div>

couches, lol.

---

<div class="post-metadata">

### Author: ![SOLITUDE](https://avatars.discourse-cdn.com/v4/letter/s/c37758/32.png) [@SOLITUDE](https://forums.speedlife.net/u/SOLITUDE)
#### Post date: [May 28, 2016, 7:43am UTC](https://forums.speedlife.net/t/official-watercraft-jet-ski-pwc-thread-boats/269132/819 "2016-05-28T07:43:24Z")

</div>

I am going out after work today after 3. I need to mess around and burn up this winter gas. My ski is so loud now I really have to build some sort of a muffler for this thing lol.

---

<div class="post-metadata">

### Author: ![Onyx\_Z32](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/onyx_z32/32/7581_2.png) [@Onyx\_Z32](https://forums.speedlife.net/u/Onyx_Z32)
#### Post date: [May 28, 2016, 5:17pm UTC](https://forums.speedlife.net/t/official-watercraft-jet-ski-pwc-thread-boats/269132/820 "2016-05-28T17:17:17Z")

</div>

I’ll be out Monday for sure.

> [@SOLITUDE](#):
>
> … I really have to build some sort of a muffler for this thing lol.

lol, why do that?

 ![http://www.stickthisgraphics.com/images/Loud%20Pipes%20Save%20Lives%20(Small).jpg](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/3X/7/4/740b5710cf3cd980db6c0f9642485f824807d61d.jpeg)

[Previous page](https://forums.speedlife.net/t/official-watercraft-jet-ski-pwc-thread-boats/269132.md?page=40)

[Next page](https://forums.speedlife.net/t/official-watercraft-jet-ski-pwc-thread-boats/269132.md?page=42)
