# Oil pressure sender

**URL:** <https://forums.speedlife.net/t/oil-pressure-sender/142294>\
**Category:** Canada Nissan Automotive\
**Created:** [April 20, 2006, 10:27pm UTC](https://forums.speedlife.net/t/oil-pressure-sender/142294 "2006-04-20T22:27:33Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![GRIPPY](https://avatars.discourse-cdn.com/v4/letter/g/ad7895/32.png) [@GRIPPY](https://forums.speedlife.net/u/GRIPPY)\
**Post date:** [April 20, 2006, 10:27pm UTC](https://forums.speedlife.net/t/oil-pressure-sender/142294/1 "2006-04-20T22:27:33Z")

</div>

Im just wanting to know where i hook up my oil pressure sender unit to on my SR20DET. Im putting in an oil pressure guage and obviously need this. Anyone done this themself?

---

<div class="post-metadata">

**Author:** ![canadianskyline](https://avatars.discourse-cdn.com/v4/letter/c/41988e/32.png) [@canadianskyline](https://forums.speedlife.net/u/canadianskyline)\
**Post date:** [April 20, 2006, 10:31pm UTC](https://forums.speedlife.net/t/oil-pressure-sender/142294/2 "2006-04-20T22:31:49Z")

</div>

You can take your oil pan off and weld a bung on it, or get a oi filterl sandwich and just screw it into that (easier of the 2 options). You can get sandwiches for like 30 bucks from mopac etc.

---

<div class="post-metadata">

**Author:** ![jdms13rhd](https://avatars.discourse-cdn.com/v4/letter/j/f05b48/32.png) [@jdms13rhd](https://forums.speedlife.net/u/jdms13rhd)\
**Post date:** [April 21, 2006, 11:50am UTC](https://forums.speedlife.net/t/oil-pressure-sender/142294/3 "2006-04-21T11:50:21Z")

</div>

go to a fitting place and just get a T fitting off of your factory pressure sending unit. It will cost like $5 and the only hard part is crackin off your factory unit! I did this to my car and I also welded a bung to the pan for the oil temp.