# Ongoing Streetfighter Project **URL:** \ **Category:** Shift518 Automotive\ **Created:** [August 20, 2009, 1:29pm UTC](https://forums.speedlife.net/t/ongoing-streetfighter-project/246235 "2009-08-20T13:29:47Z")\ **Posts on this page:** 1\ **Showing post:** 8
**Author:** ![Oleg](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/oleg/32/6276_2.png) [@Oleg](https://forums.speedlife.net/u/Oleg)\ **Post date:** [August 22, 2009, 3:51pm UTC](https://forums.speedlife.net/t/ongoing-streetfighter-project/246235/8 "2009-08-22T15:51:41Z")
> [@Violence @ Red Lobster?](https://forums.speedlife.net/t/violence-red-lobster/21943/6): > > yea…my rpms work fine…howd you set it up? Red wire with a black stripe wrapped around the plug wire, black wire with red stripe running to ground bolt on the engine case. I tried plugging both wires into the coil connectors, I tried switching them, I tried running one of them to the connector on the coil and another to ground - nothing worked any better. The settings on vapor are stock, they seem to be correct so I haven’t tried changing them. > and I want a single beam headlight but i ended up getting that one bc I want some soft of windscreen…but in reality that whole headlight is a lot smaller than I thought and is complete shit…idk im gonna run it while then see if i want to change it > I mounted a 7" on mine and then cut the stock screen to fit over it and attached it to the headlight brackets, works and looks pretty nice, there is a pic in “what you got” thread. You could try it that way if you still have the stock screen. --- _[View the full topic](https://forums.speedlife.net/t/ongoing-streetfighter-project/246235)._