# Out with the old in with the new **URL:** \ **Category:** Builds\ **Created:** [May 26, 2012, 11:00pm UTC](https://forums.speedlife.net/t/out-with-the-old-in-with-the-new/263899 "2012-05-26T23:00:28Z")\ **Posts on this page:** 20\ **Page:** 2
**Author:** ![Anth3000nygt](https://avatars.discourse-cdn.com/v4/letter/a/ecb155/32.png) [@Anth3000nygt](https://forums.speedlife.net/u/Anth3000nygt)\ **Post date:** [May 27, 2012, 6:40pm UTC](https://forums.speedlife.net/t/out-with-the-old-in-with-the-new/263899/21 "2012-05-27T18:40:48Z")
> [@Newman when did you start rapping?](https://forums.speedlife.net/t/newman-when-did-you-start-rapping/49568/16): > > Smarter car to build !! Always liked em for some reason good luck man . Thank you sir ---
**Author:** ![xdsmlaser93x](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/xdsmlaser93x/32/6507_2.png) [@xdsmlaser93x](https://forums.speedlife.net/u/xdsmlaser93x)\ **Post date:** [May 27, 2012, 6:41pm UTC](https://forums.speedlife.net/t/out-with-the-old-in-with-the-new/263899/22 "2012-05-27T18:41:09Z")
> [@Wanna cheap out on motorcycle insurance?](https://forums.speedlife.net/t/wanna-cheap-out-on-motorcycle-insurance/49731/3): > > I’ve got the stock hood. This hood is VIS carbon fiber. LEGIT carbon fiber, not carbon fiber wrapped… and it has a vent to help the engine run cooler. The 4g63 engines run hot, escpecially since the headers are almost on top of the radiator so any ventilation or after market fans to keep it cooler helps out alot. The hood isn’t ricey at all. I like it, and it was pretty damn expensive. I had a stock hood on my 2g and never had a problem with heat. ---
**Author:** ![88slowmarro](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/88slowmarro/32/6339_2.png) [@88slowmarro](https://forums.speedlife.net/u/88slowmarro)\ **Post date:** [May 27, 2012, 7:18pm UTC](https://forums.speedlife.net/t/out-with-the-old-in-with-the-new/263899/23 "2012-05-27T19:18:20Z")
^^^^Could u drive your 2g without stalling ???lolololololol ---
**Author:** ![xdsmlaser93x](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/xdsmlaser93x/32/6507_2.png) [@xdsmlaser93x](https://forums.speedlife.net/u/xdsmlaser93x)\ **Post date:** [May 27, 2012, 7:21pm UTC](https://forums.speedlife.net/t/out-with-the-old-in-with-the-new/263899/24 "2012-05-27T19:21:52Z")
> [@WTB: 1g or 2g awd dsm](https://forums.speedlife.net/t/wtb-1g-or-2g-awd-dsm/48911/27): > > ^^^^Could u drive your 2g without stalling ???lolololololol Hahahahaha yeah and a it had an act 2900 w/ a 4 puck unsprung disk in it. This morning i just had such a hard on for the redbull i just bought i couldnt do both apparently haha. I love rookie mistakes. I knew i was gonna catch shit for that. ---
**Author:** ![88slowmarro](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/88slowmarro/32/6339_2.png) [@88slowmarro](https://forums.speedlife.net/u/88slowmarro)\ **Post date:** [May 27, 2012, 7:31pm UTC](https://forums.speedlife.net/t/out-with-the-old-in-with-the-new/263899/25 "2012-05-27T19:31:44Z")
It happens lol , that is all ill say on it . ---
**Author:** ![toomanycamaros](https://avatars.discourse-cdn.com/v4/letter/t/7993a0/32.png) [@toomanycamaros](https://forums.speedlife.net/u/toomanycamaros)\ **Post date:** [May 27, 2012, 8:37pm UTC](https://forums.speedlife.net/t/out-with-the-old-in-with-the-new/263899/26 "2012-05-27T20:37:52Z")
can’t tell from the picture is the head studded? I’ve built a few of these for friends and other people and with a good cometics MLS gasket and ARP studs along with good upkeep they all held together. ---
**Author:** ![HTA86\_Evo\_IX](https://avatars.discourse-cdn.com/v4/letter/h/6bbea6/32.png) [@HTA86\_Evo\_IX](https://forums.speedlife.net/u/HTA86_Evo_IX)\ **Post date:** [May 27, 2012, 10:59pm UTC](https://forums.speedlife.net/t/out-with-the-old-in-with-the-new/263899/27 "2012-05-27T22:59:44Z")
i hate to be negative, but anything BRIAN CROWER, Sucks. there is a big difference between original CROWER stuff and the son’s junk. i have seen more than 1 set of BCC 280 cams go flat in under 10k, using correct install methods and Valvoline VR1 20w-50 oil. just junk castings. good luck with them ---
**Author:** ![88slowmarro](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/88slowmarro/32/6339_2.png) [@88slowmarro](https://forums.speedlife.net/u/88slowmarro)\ **Post date:** [May 28, 2012, 7:52am UTC](https://forums.speedlife.net/t/out-with-the-old-in-with-the-new/263899/28 "2012-05-28T07:52:56Z")
U can see a shitty wear pattern on em already . ---
**Author:** ![ErnGotti](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/erngotti/32/6372_2.png) [@ErnGotti](https://forums.speedlife.net/u/ErnGotti)\ **Post date:** [May 28, 2012, 8:00am UTC](https://forums.speedlife.net/t/out-with-the-old-in-with-the-new/263899/29 "2012-05-28T08:00:41Z")
Anthony take that damn hood off. I TOLD you if you were gonna install that it needed clear coat first. VIS gelcoat is garbage. UV rays wreck it in a hurry. Do it when you paint the car or just have Jesse throw some clear on it. This kid needs rear seats and a new headliner. Does anyone have any lying around for this beast? Also needs a bit of low. The wheel well gap is too much for me. ---
**Author:** ![Anth3000nygt](https://avatars.discourse-cdn.com/v4/letter/a/ecb155/32.png) [@Anth3000nygt](https://forums.speedlife.net/u/Anth3000nygt)\ **Post date:** [May 28, 2012, 11:10am UTC](https://forums.speedlife.net/t/out-with-the-old-in-with-the-new/263899/30 "2012-05-28T11:10:08Z")
> [@Wanna cheap out on motorcycle insurance?](https://forums.speedlife.net/t/wanna-cheap-out-on-motorcycle-insurance/49731/2): > > I doubt it has a gvr4 trans because if i remember correctly, 2g transmissions fit in 1gs but not the other way around because of the mount configuration. I would look into that for WHEN you have problems. Well you’re wrong. Just checked the serial number on the transmission. It is indeed a gvr4 tranny. ---
**Author:** ![xreaction](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/xreaction/32/6409_2.png) [@xreaction](https://forums.speedlife.net/u/xreaction)\ **Post date:** [May 28, 2012, 11:28am UTC](https://forums.speedlife.net/t/out-with-the-old-in-with-the-new/263899/31 "2012-05-28T11:28:33Z")
dsmlaser is right. 1g and gvr4 trannys have one mounting point whereas the 2g’s have 3 since you have to mount it to the roll stop and another mount on pass side. unless the previous owner swapped in a JDM gvr4 t/c tranny or fabbed the 2 mounts they won’t bolt up to a 2g. whats the serial number? ---
**Author:** ![xdsmlaser93x](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/xdsmlaser93x/32/6507_2.png) [@xdsmlaser93x](https://forums.speedlife.net/u/xdsmlaser93x)\ **Post date:** [May 28, 2012, 3:50pm UTC](https://forums.speedlife.net/t/out-with-the-old-in-with-the-new/263899/32 "2012-05-28T15:50:05Z")
> [@Sigh. Squids, another reminder...](https://forums.speedlife.net/t/sigh-squids-another-reminder/49704/19): > > Well you’re wrong. Just checked the serial number on the transmission. It is indeed a gvr4 tranny. Most likely because it has a 6 bolt in it that it works. Look into kelford cams if you decide to change them out. All in all it seems like a solid start man. Feel free to ask questions if you have any. There are a handful of veteran dsm guys on here. ---
**Author:** ![Anth3000nygt](https://avatars.discourse-cdn.com/v4/letter/a/ecb155/32.png) [@Anth3000nygt](https://forums.speedlife.net/u/Anth3000nygt)\ **Post date:** [May 28, 2012, 7:12pm UTC](https://forums.speedlife.net/t/out-with-the-old-in-with-the-new/263899/33 "2012-05-28T19:12:59Z")
> [@It's Alive!!](https://forums.speedlife.net/t/its-alive/49735/11): > > Most likely because it has a 6 bolt in it that it works. Look into kelford cams if you decide to change them out. > > All in all it seems like a solid start man. Feel free to ask questions if you have any. There are a handful of veteran dsm guys on here. Thanks for the kind words man, I appreciate it. ---
**Author:** ![KrazyKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/krazykid/32/6371_2.png) [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)\ **Post date:** [May 29, 2012, 8:20am UTC](https://forums.speedlife.net/t/out-with-the-old-in-with-the-new/263899/34 "2012-05-29T08:20:45Z")
Did you buy it from a kid in Amsterdam? If so i know the car and the owner. looks alot like the Eclipse he had for sale on and off. Sounds like the same mods too. ---
**Author:** ![jdaniels](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jdaniels/32/6399_2.png) [@jdaniels](https://forums.speedlife.net/u/jdaniels)\ **Post date:** [May 29, 2012, 10:03am UTC](https://forums.speedlife.net/t/out-with-the-old-in-with-the-new/263899/35 "2012-05-29T10:03:30Z")
Yea, that’s the one. ---
**Author:** ![KrazyKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/krazykid/32/6371_2.png) [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)\ **Post date:** [May 29, 2012, 10:20am UTC](https://forums.speedlife.net/t/out-with-the-old-in-with-the-new/263899/36 "2012-05-29T10:20:14Z")
NICE. The kids family is big car people. Mom has a nice silver TT, and a lifted black jeep with 38’s. Brother has some serious cars too. had an old Cobra with a sick built motor and made redic power way back. Last i talked to him he has a 65 mustang with a sprayed stroker, caged, uber clean car. They know their stuff, and more importantly take good care of their cars. You got a heck of a deal and a solid starting point thats for sure. BTW, you were all of 1 mile from my house too! lol ---
**Author:** ![DumpyBunny](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/dumpybunny/32/6759_2.png) [@DumpyBunny](https://forums.speedlife.net/u/DumpyBunny)\ **Post date:** [May 29, 2012, 10:50am UTC](https://forums.speedlife.net/t/out-with-the-old-in-with-the-new/263899/37 "2012-05-29T10:50:48Z")
> [@Wanna cheap out on motorcycle insurance?](https://forums.speedlife.net/t/wanna-cheap-out-on-motorcycle-insurance/49731/5): > > This kid needs rear seats and a new headliner. Does anyone have any lying around for this beast? calling KrazyChild… Do we have rear seats at the shop from the awd red car? ---
**Author:** ![LKSi](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/lksi/32/6316_2.png) [@LKSi](https://forums.speedlife.net/u/LKSi)\ **Post date:** [May 29, 2012, 11:03am UTC](https://forums.speedlife.net/t/out-with-the-old-in-with-the-new/263899/38 "2012-05-29T11:03:15Z")
protips: 1. Don’t listen to Ern 2. Ditch the hood and cams 3. Get some nice (OEM Evo maybe) wheels Good luck ---
**Author:** ![KrazyKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/krazykid/32/6371_2.png) [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)\ **Post date:** [May 29, 2012, 11:23am UTC](https://forums.speedlife.net/t/out-with-the-old-in-with-the-new/263899/39 "2012-05-29T11:23:19Z")
> [@UB Bookstore Employee?](https://forums.speedlife.net/t/ub-bookstore-employee/49740/7): > > calling KrazyChild… Do we have rear seats at the shop from the awd red car? no, they got parted out a while back. ---
**Author:** ![jdaniels](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jdaniels/32/6399_2.png) [@jdaniels](https://forums.speedlife.net/u/jdaniels)\ **Post date:** [May 29, 2012, 11:39am UTC](https://forums.speedlife.net/t/out-with-the-old-in-with-the-new/263899/40 "2012-05-29T11:39:57Z")
> [@LKSi"](#): > > protips: > > 1. Don’t listen to Ern > 2. Ditch the hood and cams > 3. Get some nice (OEM Evo maybe) wheels > > Good luck 1. That’s a given. 2. I told him how much I hate the hood, but oh well. What’s wrong with the cams? 3. Agreed. [Previous page](https://forums.speedlife.net/t/out-with-the-old-in-with-the-new/263899.md?page=1) [Next page](https://forums.speedlife.net/t/out-with-the-old-in-with-the-new/263899.md?page=3)