# Paging Adam - Do you have a bore scope?  pic inside isnt good.

**URL:** <https://forums.speedlife.net/t/paging-adam-do-you-have-a-bore-scope-pic-inside-isnt-good/248638>\
**Category:** Shift518 Automotive\
**Created:** [November 26, 2009, 11:21am UTC](https://forums.speedlife.net/t/paging-adam-do-you-have-a-bore-scope-pic-inside-isnt-good/248638 "2009-11-26T11:21:32Z")\
**Posts on this page:** 1\
**Showing post:** 12

<div class="post-metadata">

**Author:** ![KrazyKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/krazykid/32/6371_2.png) [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)\
**Post date:** [November 27, 2009, 5:40am UTC](https://forums.speedlife.net/t/paging-adam-do-you-have-a-bore-scope-pic-inside-isnt-good/248638/12 "2009-11-27T05:40:59Z")

</div>

> [@What Should It Be??](https://forums.speedlife.net/t/what-should-it-be/26269/88):
>
> i’m almost positive you are ok.

Yeah I think so… :ahh

> [@88slowmarro"](#):
>
> take the wooden dowel and press the top of the valve while the cams are at t.d.c for that cyl make sure there is no binding in any of them and they move the same .best way it to do a comp test /leak down test .if ya dont have a comp or leakdowwn tester p/m me and ya can run up to my shop off exit 10 and use my comp tester if ya need to

I will try that, and see what happens. I will let you know if i need the tester, thanks bud!

> [@FS 1991 Jimmy 4x4 built 350 33"tires-SOLD](https://forums.speedlife.net/t/fs-1991-jimmy-4x4-built-350-33-tires-sold/26317/4):
>
> i floated a valve from an over rev. it happens, i lucked out that it didnt break off, but the JE pistons have great valve relief design, no valve to piston contact was made all 4 pistons are good in my car, but the cylinder walls need some work. 83mm will solve that issue.  
> …

Thats a load off my mind, between you and pete. I will call the dealers to see if I can get a gear tonight… f not it will be good old ebay and a few days. EDIT\* Langan has one $83… fuck it i am there i guess. No brett, it didnt mess up the cam at all! VW was thinking when they made the cast gear I guess, that fails instead of the cam notch.

THANKS EVERYONE

---

_[View the full topic](https://forums.speedlife.net/t/paging-adam-do-you-have-a-bore-scope-pic-inside-isnt-good/248638)._
