# Part Out:Nissan NX **URL:** \ **Category:** Classifieds\ **Created:** [January 9, 2008, 12:09pm UTC](https://forums.speedlife.net/t/part-out-nissan-nx/194667 "2008-01-09T12:09:20Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![xlogic](https://avatars.discourse-cdn.com/v4/letter/x/59ef9b/32.png) [@xlogic](https://forums.speedlife.net/u/xlogic)\ **Post date:** [January 9, 2008, 12:09pm UTC](https://forums.speedlife.net/t/part-out-nissan-nx/194667/1 "2008-01-09T12:09:20Z")
I’m giving this thing a week or two for a part out then to the junkyard it goes 1993 Nissan NX GA16DE&Tranny(Coolant leak, had to put some coolant in every 3 weeks or so under normal driving,Tranny leaks also, have to put gear oil in with every oil change) New Clutch & TOB with less than 300miles 4x100 steelies with studded tires(one tire keeps leaking) Adjustable Coilovers w/ adjustment tool CarbonFiber Fart Can Those are just the things that i’m sure someone with a pulsar or sentra would want to know about, everything else is there, in other words the car is currently whole. Everything is best offer, just trying to get more out of it than what i’ll get for scrap. Not one bolt will be turned until buyer is 100% sure PM or Email [xlogix@gmail.com](mailto:xlogix@gmail.com) EDIT: i’m sure all of pittspeed knows the car runs but doesn’t move, tranny support rod is where i have my money, car got stuck in third and i blew countless stopsigns and lights to get it back in front of the house, since then it hasn’t moved ---
**Author:** ![gtlaw](https://avatars.discourse-cdn.com/v4/letter/g/35a633/32.png) [@gtlaw](https://forums.speedlife.net/u/gtlaw)\ **Post date:** [January 9, 2008, 5:19pm UTC](https://forums.speedlife.net/t/part-out-nissan-nx/194667/2 "2008-01-09T17:19:04Z")
can I have the little clip that holds the cable for the heater adjustment. its on the drivers side, and is held in with one screw ---
**Author:** ![green](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/green/32/5996_2.png) [@green](https://forums.speedlife.net/u/green)\ **Post date:** [January 9, 2008, 5:59pm UTC](https://forums.speedlife.net/t/part-out-nissan-nx/194667/3 "2008-01-09T17:59:43Z")
What do you want for the whole car??? And how much rust does it have?? ---
**Author:** ![b13SER](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/b13ser/32/3356_2.png) [@b13SER](https://forums.speedlife.net/u/b13SER)\ **Post date:** [January 9, 2008, 9:44pm UTC](https://forums.speedlife.net/t/part-out-nissan-nx/194667/4 "2008-01-09T21:44:08Z")
can i come check it out? is it marroon? I tink you pulled up next to me in my SE-R once in Monroeville ---
**Author:** ![xlogic](https://avatars.discourse-cdn.com/v4/letter/x/59ef9b/32.png) [@xlogic](https://forums.speedlife.net/u/xlogic)\ **Post date:** [January 10, 2008, 12:17am UTC](https://forums.speedlife.net/t/part-out-nissan-nx/194667/5 "2008-01-10T00:17:09Z")
> [@Another Day, Another Viper...](https://forums.speedlife.net/t/another-day-another-viper/34284/3): > > can I have the little clip that holds the cable for the heater adjustment. its on the drivers side, and is held in with one screw lol…your serious? come get it if so > [@FS: 2006 Yamaha R6](https://forums.speedlife.net/t/fs-2006-yamaha-r6/34235/3): > > What do you want for the whole car??? And how much rust does it have?? the whole car…honestly i know i’m not going to break even with it, i would be satisfied with like $300 which is about 1/6th of what i’ve put into, rust was bad until i did body work on it, it’s decent work and smooth/primered the only rust that i can think of now is near the gas hatch and thats not much > [@Help me pick out a new truck..Updated 9/13 with new truck piczs](https://forums.speedlife.net/t/help-me-pick-out-a-new-truck-updated-9-13-with-new-truck-piczs/34289/9): > > can i come check it out? > > is it marroon? I tink you pulled up next to me in my SE-R once in Monroeville ya its marroon…i may have, and yes just give me a call before hand 4125190361 -mike ---
**Author:** ![gtlaw](https://avatars.discourse-cdn.com/v4/letter/g/35a633/32.png) [@gtlaw](https://forums.speedlife.net/u/gtlaw)\ **Post date:** [January 10, 2008, 9:13am UTC](https://forums.speedlife.net/t/part-out-nissan-nx/194667/6 "2008-01-10T09:13:42Z")
> Quote: > Originally Posted by gtlaw View Post > can I have the little clip that holds the cable for the heater adjustment. its on the drivers side, and is held in with one screw > lol…your serious? come get it if so I’m not joking I need one, so if no one takes the whole car LMK ---
**Author:** ![xlogic](https://avatars.discourse-cdn.com/v4/letter/x/59ef9b/32.png) [@xlogic](https://forums.speedlife.net/u/xlogic)\ **Post date:** [January 10, 2008, 10:07am UTC](https://forums.speedlife.net/t/part-out-nissan-nx/194667/7 "2008-01-10T10:07:04Z")
> [@Watch Crew: What to buy?](https://forums.speedlife.net/t/watch-crew-what-to-buy/34295/2): > > I’m not joking I need one, so if no one takes the whole car LMK will do, i’m going to talk to paul and b13ser asap and figure things out, afterwards i’ll let you know ---
**Author:** ![xlogic](https://avatars.discourse-cdn.com/v4/letter/x/59ef9b/32.png) [@xlogic](https://forums.speedlife.net/u/xlogic)\ **Post date:** [January 13, 2008, 9:06pm UTC](https://forums.speedlife.net/t/part-out-nissan-nx/194667/8 "2008-01-13T21:06:31Z")
only a few days left…lmk whats going on