# \*PARTING\* 92 S13 LE coupe KAT **URL:** \ **Category:** Classifieds\ **Created:** [November 15, 2005, 2:06pm UTC](https://forums.speedlife.net/t/parting-92-s13-le-coupe-kat/90335 "2005-11-15T14:06:32Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![TheDecline](https://avatars.discourse-cdn.com/v4/letter/t/f1d935/32.png) [@TheDecline](https://forums.speedlife.net/u/TheDecline)\ **Post date:** [November 15, 2005, 2:06pm UTC](https://forums.speedlife.net/t/parting-92-s13-le-coupe-kat/90335/1 "2005-11-15T14:06:32Z")
92 Black 240SX LE Coupe pw,pl,ps,working HUD,gray leather interior. all interior behind the front seats removed but i still have the seats and some panels. OEM wing removed but i still have it. body is in fairly shitty condition. not much visible rust on the outside but the fronts of the frame rails have holes in the usual spot. small hole in the floor has been patched from the inside. engine bay has been POR15’d. rust under the rear mud guards. this car was a work in progress but it no longer suits my lifestyle and i need a truck for work. i just finished the kat a few months ago. less than 1000km on the rebuilt engine and already she has to go. just last week me and sasha were driving around in her and now for some reason the downpipe hits the tranny and makes a noise. it didn’t do that originally, just lately. should just be a matter of losening off the DP bolts and repositioning it slightly. i know im going to lose big but my loss is your gain. IAP Stage 1 Turbo Kit (~$4000) -T3/T04E Hybrid Garrett Turbo -Walbro 255LPH fuel pump -Stainless turbo oil feed and return lines -Custom IAP FMIC 33x6x3 -2" IC piping/silicone couplers/hose clamps -Greddy Type-RS BOV with Recirc fitting (current open) -Tial 38mm Wastegate -IAP custom equal legth manifold and downpipe -Megan SR downpipe with flex section -mushroom air filter _edit_ Polyurathane engine mounts TurboTech Manual boost controller included (not installed. the kind all the aussie skyline guys run) DEI Turbo Insulation Kit EuroDrive Carbon Kevlar Clutch EuroDrive Dual Diaphram Pressure Plate ($350) B&M Style Short Shifter ($120) Bings S13 Stainless Steel Catback ($475) Magnaflow 3" Highflow cat ($80) 300zx Fuel Filter 370cc injectors ($100) Apex’i SAFCII ($350) D2 Front/Rear coilovers. 8/6 ($1200) Front and Rear CP racing 4 point strut bars ($350) Trunk Battery Relocation Rebuilt KA24DE (~$500) -Honed cyclinders -New bearings -New seals and gaskets everywhere -Port and Polished head -Lapped valves Pioneer DEH-P7600MP CD/MP3/WMA CD Player JBL GTO636 3way 6-1/2" x 2 JBL P6452 2way 4x6 x 2 (~$800) JBL GT120D 12" 1000W Sub / JBL GTO301.1 Amp / 99-02 G20 Rims x2 240sx Teardrops x2 240sx 7Spokes x2 $7000OBO need gone ASAP ![http://tinypic.com/fp4gle.jpg](http://tinypic.com/fp4gle.jpg) ![http://tinypic.com/fp4i29.jpg](http://tinypic.com/fp4i29.jpg) ![http://tinypic.com/fp4jdc.jpg](http://tinypic.com/fp4jdc.jpg) ---
**Author:** ![slipperysilvia](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/slipperysilvia/32/5485_2.png) [@slipperysilvia](https://forums.speedlife.net/u/slipperysilvia)\ **Post date:** [November 15, 2005, 2:15pm UTC](https://forums.speedlife.net/t/parting-92-s13-le-coupe-kat/90335/2 "2005-11-15T14:15:23Z")
thats the 5th ka-t’r giving up this year…come on guys !!! tune that shit and keep it ! ---
**Author:** ![240\_Foz](https://avatars.discourse-cdn.com/v4/letter/2/dc4da7/32.png) [@240\_Foz](https://forums.speedlife.net/u/240_Foz)\ **Post date:** [November 15, 2005, 3:16pm UTC](https://forums.speedlife.net/t/parting-92-s13-le-coupe-kat/90335/3 "2005-11-15T15:16:03Z")
im going to guess this wont last long… ---
**Author:** ![s13Junkyard](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/s13junkyard/32/5502_2.png) [@s13Junkyard](https://forums.speedlife.net/u/s13Junkyard)\ **Post date:** [November 15, 2005, 3:35pm UTC](https://forums.speedlife.net/t/parting-92-s13-le-coupe-kat/90335/4 "2005-11-15T15:35:12Z")
man all the hours spent on rebuilding that motor and porting the head etc. this is so sad ---
**Author:** ![TheDecline](https://avatars.discourse-cdn.com/v4/letter/t/f1d935/32.png) [@TheDecline](https://forums.speedlife.net/u/TheDecline)\ **Post date:** [November 15, 2005, 7:55pm UTC](https://forums.speedlife.net/t/parting-92-s13-le-coupe-kat/90335/5 "2005-11-15T19:55:12Z")
> [@Avery](#): > > man all the hours spent on rebuilding that motor and porting the head etc. this is so sad haha dude trust me i know. i wish i didn’t have to but i need money in a hurry and this is the only way. i looked into getting a line of credit and they wont give it to me. loan too. i got nothing. i need a truck so i can work to make money but i cant get the money for a truck without working, or selling the car. ---
**Author:** ![dennisC](https://avatars.discourse-cdn.com/v4/letter/d/cdc98d/32.png) [@dennisC](https://forums.speedlife.net/u/dennisC)\ **Post date:** [November 15, 2005, 10:19pm UTC](https://forums.speedlife.net/t/parting-92-s13-le-coupe-kat/90335/6 "2005-11-15T22:19:43Z")
check PM ---
**Author:** ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)\ **Post date:** [November 16, 2005, 5:47am UTC](https://forums.speedlife.net/t/parting-92-s13-le-coupe-kat/90335/7 "2005-11-16T05:47:27Z")
your downpipe prolly isnt hitting the tranny, the flex pipe seciton is rubbing the floor. mine does that to. the flex pipe section is alot wider than the rest of the DP and… ur nuts… ---
**Author:** ![jcs13\_90](https://avatars.discourse-cdn.com/v4/letter/j/48db29/32.png) [@jcs13\_90](https://forums.speedlife.net/u/jcs13_90)\ **Post date:** [November 16, 2005, 9:41am UTC](https://forums.speedlife.net/t/parting-92-s13-le-coupe-kat/90335/8 "2005-11-16T09:41:20Z")
I know you probably want to sell everything together with the car, but if you want to, i’d be interested in buying that BOV, if its an official greddy type RS ---
**Author:** ![TheDecline](https://avatars.discourse-cdn.com/v4/letter/t/f1d935/32.png) [@TheDecline](https://forums.speedlife.net/u/TheDecline)\ **Post date:** [November 16, 2005, 10:42pm UTC](https://forums.speedlife.net/t/parting-92-s13-le-coupe-kat/90335/9 "2005-11-16T22:42:51Z")
> [@bing](#): > > your downpipe prolly isnt hitting the tranny, the flex pipe seciton is rubbing the floor. mine does that to. the flex pipe section is alot wider than the rest of the DP > > and… > > ur nuts… ya the flex pipe is hitting the floor but its nice and snugg and doesn’t move. if you heard the noise you can tell its something hallow hitting something hard. ask sasha. and why ami nuts? 8) ---
**Author:** ![spilner](https://avatars.discourse-cdn.com/v4/letter/s/f17d59/32.png) [@spilner](https://forums.speedlife.net/u/spilner)\ **Post date:** [November 17, 2005, 11:07pm UTC](https://forums.speedlife.net/t/parting-92-s13-le-coupe-kat/90335/10 "2005-11-17T23:07:26Z")
your nuts because of the time you spent on this… at least take out the motor and put a stock KA back in it b4 u sell… whoever buys this car will be getting a crazy crazy deal, rust or not. ---
**Author:** ![kevin\_grey\_black](https://avatars.discourse-cdn.com/v4/letter/k/6de8d8/32.png) [@kevin\_grey\_black](https://forums.speedlife.net/u/kevin_grey_black)\ **Post date:** [November 18, 2005, 7:27am UTC](https://forums.speedlife.net/t/parting-92-s13-le-coupe-kat/90335/11 "2005-11-18T07:27:46Z")
> [@spilner](#): > > your nuts because of the time you spent on this… at least take out the motor and put a stock KA back in it b4 u sell… > > whoever buys this car will be getting a crazy crazy deal, rust or not. if this happens i will buy the car . kevin ---
**Author:** ![spilner](https://avatars.discourse-cdn.com/v4/letter/s/f17d59/32.png) [@spilner](https://forums.speedlife.net/u/spilner)\ **Post date:** [November 18, 2005, 10:09am UTC](https://forums.speedlife.net/t/parting-92-s13-le-coupe-kat/90335/12 "2005-11-18T10:09:07Z")
nice pic of this car on my site… [http://www.meanstreetspeed.com/articles.html](http://www.meanstreetspeed.com/articles.html) ---
**Author:** ![TheDecline](https://avatars.discourse-cdn.com/v4/letter/t/f1d935/32.png) [@TheDecline](https://forums.speedlife.net/u/TheDecline)\ **Post date:** [November 20, 2005, 5:01pm UTC](https://forums.speedlife.net/t/parting-92-s13-le-coupe-kat/90335/13 "2005-11-20T17:01:20Z")
> [@spilner](#): > > your nuts because of the time you spent on this… at least take out the motor and put a stock KA back in it b4 u sell… > > whoever buys this car will be getting a crazy crazy deal, rust or not. i just put the new engine in. i dont feel like taking it out. the name of the game is get rid of it so i can move on. and i dont want another 240 so what the hell am i gonna do with a ka-t ---
**Author:** ![TheDecline](https://avatars.discourse-cdn.com/v4/letter/t/f1d935/32.png) [@TheDecline](https://forums.speedlife.net/u/TheDecline)\ **Post date:** [November 21, 2005, 4:50pm UTC](https://forums.speedlife.net/t/parting-92-s13-le-coupe-kat/90335/14 "2005-11-21T16:50:00Z")
game plan has changed. i had a really bad weekend with the 240 so there is some new battle damage. something seems to be wrong internally with the engine although im not entirely sure at this point. might have fried a ring on one of the cylinders. in any case. this car is now being parted. make me an offer on whatever you want. i dont know if this now constitutes being moved to the buy/sell section… 😢 ---
**Author:** ![lewtz](https://avatars.discourse-cdn.com/v4/letter/l/439d5e/32.png) [@lewtz](https://forums.speedlife.net/u/lewtz)\ **Post date:** [November 21, 2005, 6:10pm UTC](https://forums.speedlife.net/t/parting-92-s13-le-coupe-kat/90335/15 "2005-11-21T18:10:33Z")
how much do you want for the short shifter and d2’s? get back to me soon. ---
**Author:** ![spilner](https://avatars.discourse-cdn.com/v4/letter/s/f17d59/32.png) [@spilner](https://forums.speedlife.net/u/spilner)\ **Post date:** [November 21, 2005, 8:10pm UTC](https://forums.speedlife.net/t/parting-92-s13-le-coupe-kat/90335/16 "2005-11-21T20:10:00Z")
SAFC \> MINE someone move this to buy sell and change the title accordingly. ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [November 21, 2005, 8:25pm UTC](https://forums.speedlife.net/t/parting-92-s13-le-coupe-kat/90335/17 "2005-11-21T20:25:04Z")
Call me about the turbo…PM’d ---
**Author:** ![jugs](https://avatars.discourse-cdn.com/v4/letter/j/6a8cbe/32.png) [@jugs](https://forums.speedlife.net/u/jugs)\ **Post date:** [November 22, 2005, 6:11am UTC](https://forums.speedlife.net/t/parting-92-s13-le-coupe-kat/90335/18 "2005-11-22T06:11:00Z")
How much for all of: -Greddy Type-RS BOV with Recirc fitting -Megan SR downpipe with flex section -Magnaflow 3" Highflow cat ($80) -370cc injectors ($100) ---
**Author:** ![bing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bing/32/7211_2.png) [@bing](https://forums.speedlife.net/u/bing)\ **Post date:** [November 22, 2005, 6:09pm UTC](https://forums.speedlife.net/t/parting-92-s13-le-coupe-kat/90335/19 "2005-11-22T18:09:17Z")
moved, title changed. ---
**Author:** ![\_RSTuning.ca](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/_rstuning.ca/32/6098_2.png) [@\_RSTuning.ca](https://forums.speedlife.net/u/_RSTuning.ca)\ **Post date:** [November 22, 2005, 6:39pm UTC](https://forums.speedlife.net/t/parting-92-s13-le-coupe-kat/90335/20 "2005-11-22T18:39:01Z")
how much for the wastegate [Next page](https://forums.speedlife.net/t/parting-92-s13-le-coupe-kat/90335.md?page=2)