# Parting out: Big HP BUILT 180sx HKS\*GREDDY\*TOMEI\*APEXi\*STANCE\*SR SWAP\*COILS\*MORE **URL:** \ **Category:** Classifieds\ **Created:** [July 26, 2012, 10:40pm UTC](https://forums.speedlife.net/t/parting-out-big-hp-built-180sx-hks-greddy-tomei-apexi-stance-sr-swap-coils-more/224868 "2012-07-26T22:40:23Z")\ **Posts on this page:** 14\ **Page:** 1
**Author:** ![sharpe\_corners](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sharpe_corners/32/5767_2.png) [@sharpe\_corners](https://forums.speedlife.net/u/sharpe_corners)\ **Post date:** [July 26, 2012, 10:40pm UTC](https://forums.speedlife.net/t/parting-out-big-hp-built-180sx-hks-greddy-tomei-apexi-stance-sr-swap-coils-more/224868/1 "2012-07-26T22:40:23Z")
Basically, significantly changing my setup, power goals etc. Selling my drivetrain, suspension and thats it. **Turnkey Drivetrain:** 93 SR20DET (150psi across, runs perfect) Tomei Cams (256) Tomei RAS _OEM INTAKE MANIFOLD_ Greddy Oil Pan Greddy Top Feed Fuel Rail 750CC RC Injectors Aeromotive regulator Proper AN Fuel lines Garrett 2876R Turbine Stainless Oil Lines HPI Split Style Downpipe Aftermarket Turbo Elbow Tubular Exhaust Manifold Power FC D-Jetro, tuned to close to 380hp New Transmission (98 Kouki S14 Silvia K) Short Shift Kit ORC CLUTCH (-3500kms only) New Seals on engine/trans New OEM Coilpacks Wiring Harness Intake for upgrade turbo All Accesories (P/S, ALTERNATOR,ETC) All sensors, etc TURN KEY SWAP. $5500 obo. What is listed, is what you get. Always taken care of, religious oil changes during lapping days, drift days etc. approx 5000kms on the aftermarket parts All parts purchased on [FRSPORT.com](http://FRSPORT.com) **Other sweet goods… see the \*\*\*\*\*\*\*\*\*\* for fancy stuff**. \*\*\*\*\*Greddy Pulley Kit (blue) New condition (PS pulley was never installed) ALT, WATER PUMP, P/S. $250 (400msrp) Greddy Intake Manifold _deposit placed_ \*\*\*\*\*\*Greddy R Spec FMIC Kit, freshly polished, all clamps, hardwares etc. $650, to suit S14 SR or Greddy INTAKE! could be modded for S13 Use. \*\*\*\*\*\*Greddy Rad _very rare, expensive part_ Full polished, great condition $550 ($1000+ new) Greddy Oil cooler kit, front mounted, as new condition, $550 \*\*\*\*\*\*Blitz Oil cooler Kit, Side mounted, $600 (1200 new) \*\*\*\*\*\*HKS Turbo Manifold, ceramic coated, finish is poor, low miles, no damage or repairs, will never break. $650 ($1000 new) \*\*\*\*\*\*HPI 1 PC Bellmouth split downpipe (great for LOW cars, super rare sweet part. its a turbo elbow and dp in one. Has trans bracket aswell. $300 CS Coolant tank $80 Moroso Oil Pan $260 Like new, never driven but installed. Tomei Coil pack Cover $85 Brand new condition SR20DET Koyo Racing Rad, fresh polish, samcos, FAL Fans(black or blue, i have 2) $500 SR20DET Koyo Racing Rad, fresh polish, just the rad $230 FAL Fans\*black or Blue shroud, i have 2) $200 B&M short shifter, as new, doesnt rattle $170 AEM Wideband $170 Greddy Rad cap $30 Sard Rad Cap $30 SR Trans 3rd gear grind $100 Daimsel Cluster 280KPH $400 HKS EVC-S Electronic Boost Controller (very user friendly, was bought new, comes with instructions in english) $340 **Suspension** Stance GR+ Pro, 9/7?k excellent shape, never super low $1050. 5000kms. No salt or rust. Im Located in Hamilton Ontario Canada Most parts are still on my car, and will be taken off in person. 905 96two 74nine8. No lowballers, no dreamers, no haters, no “bro my boy in brampton can get it for xxx” or “i cant afford your sick parts, cry cry cry” or whatever. You interested? Send me a TEXT (anytime)or a Phonecall! (9am-11pm MY TIME, ONTARIO CANADA) NO PM, EVER. I will ship stuff. Paypal baby. See my excellent Itrader, and my Itrader on forums such as [Zilvia.net](http://Zilvia.net) and SON240SX! Combined over 60 Itrader! Some photos… of the stuff… ![http://a6.sphotos.ak.fbcdn.net/hphotos-ak-ash3/s720x720/575569_3872886394740_767790475_n.jpg](http://a6.sphotos.ak.fbcdn.net/hphotos-ak-ash3/s720x720/575569_3872886394740_767790475_n.jpg) ---
**Author:** ![sharpe\_corners](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sharpe_corners/32/5767_2.png) [@sharpe\_corners](https://forums.speedlife.net/u/sharpe_corners)\ **Post date:** [July 27, 2012, 4:14pm UTC](https://forums.speedlife.net/t/parting-out-big-hp-built-180sx-hks-greddy-tomei-apexi-stance-sr-swap-coils-more/224868/2 "2012-07-27T16:14:21Z")
MOROSO PAN IS SOLD ---
**Author:** ![sharpe\_corners](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sharpe_corners/32/5767_2.png) [@sharpe\_corners](https://forums.speedlife.net/u/sharpe_corners)\ **Post date:** [July 30, 2012, 7:58pm UTC](https://forums.speedlife.net/t/parting-out-big-hp-built-180sx-hks-greddy-tomei-apexi-stance-sr-swap-coils-more/224868/3 "2012-07-30T19:58:47Z")
Greddy Intake SOLD ---
**Author:** ![ryan22](https://avatars.discourse-cdn.com/v4/letter/r/3be4f8/32.png) [@ryan22](https://forums.speedlife.net/u/ryan22)\ **Post date:** [July 31, 2012, 10:07am UTC](https://forums.speedlife.net/t/parting-out-big-hp-built-180sx-hks-greddy-tomei-apexi-stance-sr-swap-coils-more/224868/4 "2012-07-31T10:07:47Z")
This stuff wins trophies all day 😛 ---
**Author:** ![sharpe\_corners](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sharpe_corners/32/5767_2.png) [@sharpe\_corners](https://forums.speedlife.net/u/sharpe_corners)\ **Post date:** [August 3, 2012, 9:31pm UTC](https://forums.speedlife.net/t/parting-out-big-hp-built-180sx-hks-greddy-tomei-apexi-stance-sr-swap-coils-more/224868/5 "2012-08-03T21:31:23Z")
Greddy oil cooler SOLD ---
**Author:** ![danbikes](https://avatars.discourse-cdn.com/v4/letter/d/f9ae1b/32.png) [@danbikes](https://forums.speedlife.net/u/danbikes)\ **Post date:** [August 4, 2012, 12:18am UTC](https://forums.speedlife.net/t/parting-out-big-hp-built-180sx-hks-greddy-tomei-apexi-stance-sr-swap-coils-more/224868/6 "2012-08-04T00:18:05Z")
Willing to split cams+RAS? ---
**Author:** ![sharpe\_corners](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sharpe_corners/32/5767_2.png) [@sharpe\_corners](https://forums.speedlife.net/u/sharpe_corners)\ **Post date:** [August 4, 2012, 5:59am UTC](https://forums.speedlife.net/t/parting-out-big-hp-built-180sx-hks-greddy-tomei-apexi-stance-sr-swap-coils-more/224868/7 "2012-08-04T05:59:03Z")
no separating cams and ras, sorry ---
**Author:** ![sharpe\_corners](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sharpe_corners/32/5767_2.png) [@sharpe\_corners](https://forums.speedlife.net/u/sharpe_corners)\ **Post date:** [August 12, 2012, 8:09am UTC](https://forums.speedlife.net/t/parting-out-big-hp-built-180sx-hks-greddy-tomei-apexi-stance-sr-swap-coils-more/224868/8 "2012-08-12T08:09:45Z")
Bump. Engine comes with what is listed, doesn’t come with the other items. ---
**Author:** ![Sky14](https://avatars.discourse-cdn.com/v4/letter/s/bcef8e/32.png) [@Sky14](https://forums.speedlife.net/u/Sky14)\ **Post date:** [August 12, 2012, 5:31pm UTC](https://forums.speedlife.net/t/parting-out-big-hp-built-180sx-hks-greddy-tomei-apexi-stance-sr-swap-coils-more/224868/9 "2012-08-12T17:31:55Z")
What kind of service is offered here at sharpe corp? ---
**Author:** ![sharpe\_corners](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sharpe_corners/32/5767_2.png) [@sharpe\_corners](https://forums.speedlife.net/u/sharpe_corners)\ **Post date:** [August 13, 2012, 8:54pm UTC](https://forums.speedlife.net/t/parting-out-big-hp-built-180sx-hks-greddy-tomei-apexi-stance-sr-swap-coils-more/224868/10 "2012-08-13T20:54:20Z")
Koyo rads sold fans sold, motorset sold, tomei cover sold, cs box sold, greddy pulley sold, walbro sold. ---
**Author:** ![Prabu](https://avatars.discourse-cdn.com/v4/letter/p/f1d935/32.png) [@Prabu](https://forums.speedlife.net/u/Prabu)\ **Post date:** [August 13, 2012, 10:06pm UTC](https://forums.speedlife.net/t/parting-out-big-hp-built-180sx-hks-greddy-tomei-apexi-stance-sr-swap-coils-more/224868/11 "2012-08-13T22:06:17Z")
Want the AEM Wide band ---
**Author:** ![trillex905](https://avatars.discourse-cdn.com/v4/letter/t/3da27b/32.png) [@trillex905](https://forums.speedlife.net/u/trillex905)\ **Post date:** [August 13, 2012, 10:23pm UTC](https://forums.speedlife.net/t/parting-out-big-hp-built-180sx-hks-greddy-tomei-apexi-stance-sr-swap-coils-more/224868/12 "2012-08-13T22:23:46Z")
want the oil filler cap. is it real jdm? ---
**Author:** ![Chandlers13](https://avatars.discourse-cdn.com/v4/letter/c/e495f1/32.png) [@Chandlers13](https://forums.speedlife.net/u/Chandlers13)\ **Post date:** [November 1, 2012, 8:46pm UTC](https://forums.speedlife.net/t/parting-out-big-hp-built-180sx-hks-greddy-tomei-apexi-stance-sr-swap-coils-more/224868/13 "2012-11-01T20:46:42Z")
harness? ---
**Author:** ![sharpe\_corners](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sharpe_corners/32/5767_2.png) [@sharpe\_corners](https://forums.speedlife.net/u/sharpe_corners)\ **Post date:** [November 8, 2012, 5:37am UTC](https://forums.speedlife.net/t/parting-out-big-hp-built-180sx-hks-greddy-tomei-apexi-stance-sr-swap-coils-more/224868/14 "2012-11-08T05:37:58Z")
Not splitting the swap. Thanks. i sold it anyway.