# Parts required for SR20 Swap

**URL:** <https://forums.speedlife.net/t/parts-required-for-sr20-swap/143957>\
**Category:** Canada Nissan Automotive\
**Created:** [August 25, 2006, 9:36pm UTC](https://forums.speedlife.net/t/parts-required-for-sr20-swap/143957 "2006-08-25T21:36:37Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![MangledMoose](https://avatars.discourse-cdn.com/v4/letter/m/a88e57/32.png) [@MangledMoose](https://forums.speedlife.net/u/MangledMoose)\
**Post date:** [August 25, 2006, 9:36pm UTC](https://forums.speedlife.net/t/parts-required-for-sr20-swap/143957/1 "2006-08-25T21:36:37Z")

</div>

Alright i realize that this probably has been covered before. I dont have access to a full clip but im looking at buying a Chassie and Engine sperate what else would i need to complete the swap and make the car drive able?

---

<div class="post-metadata">

**Author:** ![RS13](https://avatars.discourse-cdn.com/v4/letter/r/46a35a/32.png) [@RS13](https://forums.speedlife.net/u/RS13)\
**Post date:** [August 25, 2006, 10:03pm UTC](https://forums.speedlife.net/t/parts-required-for-sr20-swap/143957/2 "2006-08-25T22:03:53Z")

</div>

depend on what your motor comes with.

---

<div class="post-metadata">

**Author:** ![MangledMoose](https://avatars.discourse-cdn.com/v4/letter/m/a88e57/32.png) [@MangledMoose](https://forums.speedlife.net/u/MangledMoose)\
**Post date:** [August 25, 2006, 10:08pm UTC](https://forums.speedlife.net/t/parts-required-for-sr20-swap/143957/3 "2006-08-25T22:08:45Z")

</div>

S14 SR20 form AutoDream comes with Complete motor & tranny  
uncut harness, ECU, Ignitor chip

---

<div class="post-metadata">

**Author:** ![silvia\_sr20det\_s13](https://avatars.discourse-cdn.com/v4/letter/s/ed655f/32.png) [@silvia\_sr20det\_s13](https://forums.speedlife.net/u/silvia_sr20det_s13)\
**Post date:** [August 30, 2006, 10:26pm UTC](https://forums.speedlife.net/t/parts-required-for-sr20-swap/143957/4 "2006-08-30T22:26:42Z")

</div>

you will need an intercooler, the piping, you will need to make the exhaust work if you dont have after market or if you dont have the stock down pipe! you will need to wire the harness to work with the specific chassis its going in but autodream SHOULD give you mostly what you need  
NO motor swap is a DROP IT IN and run swap! unless you are putting the same motor in! from what lots of people think the sr20 swap is easy but there will allways be little complications!

---

<div class="post-metadata">

**Author:** ![Jason\_Lange](https://avatars.discourse-cdn.com/v4/letter/j/65b543/32.png) [@Jason\_Lange](https://forums.speedlife.net/u/Jason_Lange)\
**Post date:** [October 21, 2006, 1:35am UTC](https://forums.speedlife.net/t/parts-required-for-sr20-swap/143957/5 "2006-10-21T01:35:10Z")

</div>

first get motor then install it then work out the details that come along next drive it…

---

<div class="post-metadata">

**Author:** ![fcukven1](https://avatars.discourse-cdn.com/v4/letter/f/c2a13f/32.png) [@fcukven1](https://forums.speedlife.net/u/fcukven1)\
**Post date:** [October 21, 2006, 1:19pm UTC](https://forums.speedlife.net/t/parts-required-for-sr20-swap/143957/6 "2006-10-21T13:19:39Z")

</div>

like rob said depends what the engine comes with.

im going from sohc to dohc and i needed a crap load of stuff that i have sitting in my apartment.

igni  
fuel rail  
ecu (make sure is compatible with the engine)  
starter  
uncut harness  
injectors  
sensors  
cluster (with harness)  
distributor and coil  
fluids  
tranny (3 sensors )  
plug wires

to my knowledge, im sure im missing something lol

---

<div class="post-metadata">

**Author:** ![Invalid\_Zero](https://avatars.discourse-cdn.com/v4/letter/i/ecae2f/32.png) [@Invalid\_Zero](https://forums.speedlife.net/u/Invalid_Zero)\
**Post date:** [October 21, 2006, 2:38pm UTC](https://forums.speedlife.net/t/parts-required-for-sr20-swap/143957/7 "2006-10-21T14:38:41Z")

</div>

RWD SR20’s don’t have plug wires.

---

<div class="post-metadata">

**Author:** ![boydfoose](https://avatars.discourse-cdn.com/v4/letter/b/a183cd/32.png) [@boydfoose](https://forums.speedlife.net/u/boydfoose)\
**Post date:** [November 8, 2010, 4:21am UTC](https://forums.speedlife.net/t/parts-required-for-sr20-swap/143957/8 "2010-11-08T04:21:29Z")

</div>

Lots of parts to replace for one car, hope it runs well. I’ve been buying parts over the internet since my car bugged down.

* * *

**_Nissan Parts_** | **_[Distributor](http://www.thepartsbin.com/brands/bosch/bosch_distributor.html)_** | **_Nissan Racing | Calsonic Rules_**
