# pcv valve

**URL:** <https://forums.speedlife.net/t/pcv-valve/257896>\
**Category:** Shift518 Automotive\
**Created:** [April 14, 2011, 4:18pm UTC](https://forums.speedlife.net/t/pcv-valve/257896 "2011-04-14T16:18:11Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![nico\_butcher](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nico_butcher/32/6691_2.png) [@nico\_butcher](https://forums.speedlife.net/u/nico_butcher)\
**Post date:** [April 14, 2011, 4:18pm UTC](https://forums.speedlife.net/t/pcv-valve/257896/1 "2011-04-14T16:18:11Z")

</div>

ok so looking over for more evidence that my rear main seal was causing an oil leak, and i noticed that at the back of the motor that the spot that my pcv valve was supposed to be was empty and open, well luckily i found the valve on the back of the motor but what i want to know is if this fell out would it cause a pretty big oil leak?

---

<div class="post-metadata">

**Author:** ![MclarenGP](https://avatars.discourse-cdn.com/v4/letter/m/57b2e6/32.png) [@MclarenGP](https://forums.speedlife.net/u/MclarenGP)\
**Post date:** [April 14, 2011, 4:22pm UTC](https://forums.speedlife.net/t/pcv-valve/257896/2 "2011-04-14T16:22:13Z")

</div>

maybe it popped off from excessive blow by, bad rings, in that case, yes.

---

<div class="post-metadata">

**Author:** ![nico\_butcher](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nico_butcher/32/6691_2.png) [@nico\_butcher](https://forums.speedlife.net/u/nico_butcher)\
**Post date:** [April 14, 2011, 4:29pm UTC](https://forums.speedlife.net/t/pcv-valve/257896/3 "2011-04-14T16:29:02Z")

</div>

well last summer my father in law pulled the intake off and some of the hoses with it and i think when he did this it must of came off and it just never occurred to me that it would have. it started to leak oil like a few days after this happened.

---

<div class="post-metadata">

**Author:** ![88slowmarro](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/88slowmarro/32/6339_2.png) [@88slowmarro](https://forums.speedlife.net/u/88slowmarro)\
**Post date:** [April 14, 2011, 6:50pm UTC](https://forums.speedlife.net/t/pcv-valve/257896/4 "2011-04-14T18:50:04Z")

</div>

it very well could leak the oil . orrrr a valvecover could be leakin , intake could be leaking etc etc .

---

<div class="post-metadata">

**Author:** ![Wayne64SS](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/wayne64ss/32/6365_2.png) [@Wayne64SS](https://forums.speedlife.net/u/Wayne64SS)\
**Post date:** [April 14, 2011, 7:34pm UTC](https://forums.speedlife.net/t/pcv-valve/257896/5 "2011-04-14T19:34:34Z")

</div>

yea buddy!!! put the valve back in and spray it down with break clean real good. See if the leak returns. I bet you’re gonna be alright.

---

<div class="post-metadata">

**Author:** ![nico\_butcher](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nico_butcher/32/6691_2.png) [@nico\_butcher](https://forums.speedlife.net/u/nico_butcher)\
**Post date:** [April 14, 2011, 7:54pm UTC](https://forums.speedlife.net/t/pcv-valve/257896/6 "2011-04-14T19:54:33Z")

</div>

yeah im pretty sure my plenum pierced the driver side valve cover but not enough to cause that kind of oil leakage. i plugged it back in and took my son for a drive init, didn’t smell anything till i got on it on 29 but just figured that was some oil that had been sitting on there.

---

<div class="post-metadata">

**Author:** ![88slowmarro](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/88slowmarro/32/6339_2.png) [@88slowmarro](https://forums.speedlife.net/u/88slowmarro)\
**Post date:** [April 15, 2011, 4:16am UTC](https://forums.speedlife.net/t/pcv-valve/257896/7 "2011-04-15T04:16:42Z")

</div>

ya prolly fine then , besides when i was gonna do it i was gonna make sure it was leaking before i pulled it all apart lolol , i hate doin rear mains

---

<div class="post-metadata">

**Author:** ![Johawk](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/johawk/32/6284_2.png) [@Johawk](https://forums.speedlife.net/u/Johawk)\
**Post date:** [April 15, 2011, 4:55am UTC](https://forums.speedlife.net/t/pcv-valve/257896/8 "2011-04-15T04:55:03Z")

</div>

How much oil have you been using quarts vs miles? I wouldn’t worry. Just keep an eye on that dipstick for a while. And just look at it.

---

<div class="post-metadata">

**Author:** ![nico\_butcher](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nico_butcher/32/6691_2.png) [@nico\_butcher](https://forums.speedlife.net/u/nico_butcher)\
**Post date:** [April 15, 2011, 5:05am UTC](https://forums.speedlife.net/t/pcv-valve/257896/9 "2011-04-15T05:05:21Z")

</div>

well i only filled it with oil once last year i didnt drive it long after i noticed it.
