# pics of friends setup in the making **URL:** \ **Category:** Shift518 Automotive\ **Created:** [August 19, 2011, 11:24am UTC](https://forums.speedlife.net/t/pics-of-friends-setup-in-the-making/260050 "2011-08-19T11:24:36Z")\ **Posts on this page:** 20\ **Page:** 2
**Author:** ![Shady](https://avatars.discourse-cdn.com/v4/letter/s/6de8d8/32.png) [@Shady](https://forums.speedlife.net/u/Shady)\ **Post date:** [August 19, 2011, 1:11pm UTC](https://forums.speedlife.net/t/pics-of-friends-setup-in-the-making/260050/21 "2011-08-19T13:11:27Z")
> [@Kids in sandals who cant touch the ground, shouldnt play with bikes](https://forums.speedlife.net/t/kids-in-sandals-who-cant-touch-the-ground-shouldnt-play-with-bikes/44756/4): > > i particularly like that manifold at the top of the picture. i bet it flows well. I dident even see that 🤣rofl:rofl:rofl:rofl:rofl:rofl ---
**Author:** ![GD3Skier](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/gd3skier/32/6400_2.png) [@GD3Skier](https://forums.speedlife.net/u/GD3Skier)\ **Post date:** [August 19, 2011, 1:22pm UTC](https://forums.speedlife.net/t/pics-of-friends-setup-in-the-making/260050/22 "2011-08-19T13:22:12Z")
> [@OK JayS... (Spitzer Prostitution Scandal Inside)](https://forums.speedlife.net/t/ok-jays-spitzer-prostitution-scandal-inside/44740/74): > > the kid who welded works for a good company. makes the railings for the new trade center/ ground zero project . his welds do not break. Well shit… looks like the terrorists will only need a stifff breeze if they choseto plan an attack on this one. Too soon? ---
**Author:** ![ReDevil](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/redevil/32/6385_2.png) [@ReDevil](https://forums.speedlife.net/u/ReDevil)\ **Post date:** [August 19, 2011, 1:23pm UTC](https://forums.speedlife.net/t/pics-of-friends-setup-in-the-making/260050/23 "2011-08-19T13:23:16Z")
Weeeeeeeeeeeeeee ---
**Author:** ![capitalcrew](https://avatars.discourse-cdn.com/v4/letter/c/e79b87/32.png) [@capitalcrew](https://forums.speedlife.net/u/capitalcrew)\ **Post date:** [August 19, 2011, 1:25pm UTC](https://forums.speedlife.net/t/pics-of-friends-setup-in-the-making/260050/24 "2011-08-19T13:25:13Z")
Jesus christ. If you can’t afford to buy bends, do this. ![http://img.photobucket.com/albums/v169/Philipdalgity/Evo/Exhaust/IMG_1533.jpg](http://img.photobucket.com/albums/v169/Philipdalgity/Evo/Exhaust/IMG_1533.jpg) That exhaust is going to be turbulant as FUCK. With a proper manifold, downpipe, and anything else he welded, I anticipate HUGE gains. ---
**Author:** ![MclarenGP](https://avatars.discourse-cdn.com/v4/letter/m/57b2e6/32.png) [@MclarenGP](https://forums.speedlife.net/u/MclarenGP)\ **Post date:** [August 19, 2011, 1:39pm UTC](https://forums.speedlife.net/t/pics-of-friends-setup-in-the-making/260050/25 "2011-08-19T13:39:49Z")
what is wrong with the welds? you guys fucking loving this one… he wanted me to post it and has a name here as of the other day. If he wants to come on, he can. , Never said it was of high qaulity, the materials were scrap and cost nothing. Nor did i say it was the most efficient turbo setup . This is what you get when you build something by hand with Zero dollars and you dont give a shit. Its not my car and i tell him all the time i will blow its doors in… in a friendly fashion , we’ve been friends a while and if it makes him happy and works … thats all that matters. I personally do not give a shit. The kid has gone through a lot of shit , more than most people have, and still is. He’s a good kid so keep that in mind if he does come on here. no one is swingin dicks here. ---
**Author:** ![KrazyKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/krazykid/32/6371_2.png) [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)\ **Post date:** [August 19, 2011, 1:45pm UTC](https://forums.speedlife.net/t/pics-of-friends-setup-in-the-making/260050/26 "2011-08-19T13:45:07Z")
> [@OK JayS... (Spitzer Prostitution Scandal Inside)](https://forums.speedlife.net/t/ok-jays-spitzer-prostitution-scandal-inside/44740/74): > > ok. welds are not going to break. Not just sitting there on the bench maybe. A few heat cycles later, they might. Also is that turbo supported at all? If not that manifold WILL crack welds trying to hold the turbo up there. What is up with that manifold too? did you guys cut the section off the cast manifold and weld on a piece of square tube? I am usually not one to bash others work, but if the time and money was spent to do that, a little more time and a little more money it could have been done way better. Not saying the exhaust gasses wont go into the turbo, make boost and go from there… so I guess pretty isn’t a necessity, but the over all work I question the integrity on the work. that’s all constructive criticism i will give for now. ---
**Author:** ![KrazyKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/krazykid/32/6371_2.png) [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)\ **Post date:** [August 19, 2011, 1:47pm UTC](https://forums.speedlife.net/t/pics-of-friends-setup-in-the-making/260050/27 "2011-08-19T13:47:23Z")
> [@FS: 2005 Ninja 250 $2200](https://forums.speedlife.net/t/fs-2005-ninja-250-2200/44685/17): > > **what is wrong with the welds?** you guys fucking loving this one… he wanted me to post it and has a name here as of the other day. If he wants to come on, he can. , Never said it was of high qaulity, the materials were scrap and cost nothing. Nor did i say it was the most efficient turbo setup . This is what you get when you build something by hand with Zero dollars and you dont give a shit. Its not my car and i tell him all the time i will blow its doors in… in a friendly fashion , we’ve been friends a while and if it makes him happy and works … thats all that matters. I personally do not give a shit. The kid has gone through a lot of shit , more than most people have, and still is. He’s a good kid so keep that in mind if he does come on here. no one is swingin dicks here. They are migged right? lets start here. ---
**Author:** ![DeathbyRT](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/deathbyrt/32/6648_2.png) [@DeathbyRT](https://forums.speedlife.net/u/DeathbyRT)\ **Post date:** [August 19, 2011, 1:51pm UTC](https://forums.speedlife.net/t/pics-of-friends-setup-in-the-making/260050/28 "2011-08-19T13:51:01Z")
Why would you lie and tell him your car will blow his doors in? ---
**Author:** ![KrazyKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/krazykid/32/6371_2.png) [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)\ **Post date:** [August 19, 2011, 1:54pm UTC](https://forums.speedlife.net/t/pics-of-friends-setup-in-the-making/260050/29 "2011-08-19T13:54:58Z")
wont even wait for response, I think they are migged I see little slag dots on the pipes. First and foremost, how does the inside of those manifolds, cross over pipes and all the vbands look on the inside? If you migged them, which I think you did, there is no post flow to shield the welds after they are red hot… so the welds are full of porosity. and 1200 deg exhaust temps will make those welds hate life. If they are tigged, they are HEAVY welds, way too much filler/too thick filler. So the backside of the weld on the insside of the tube are going to look boogery inside too, with excessive penetration from the weight of the weld puddle as he is welding. Back purged? I highly doubt it. That turbo’s impeller wont last a month after being pelted with fragments of weld falling off inside, and other nasty forming naturally on unshielded welds. If my assumptions above are correct, thats enough to make you and your friend start over and try again, for the turbos sake. ---
**Author:** ![KrazyKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/krazykid/32/6371_2.png) [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)\ **Post date:** [August 19, 2011, 1:56pm UTC](https://forums.speedlife.net/t/pics-of-friends-setup-in-the-making/260050/30 "2011-08-19T13:56:07Z")
Ohh and dont ever put your welding helmet on the bench like that either. 🙂 ---
**Author:** ![DeathbyRT](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/deathbyrt/32/6648_2.png) [@DeathbyRT](https://forums.speedlife.net/u/DeathbyRT)\ **Post date:** [August 19, 2011, 1:59pm UTC](https://forums.speedlife.net/t/pics-of-friends-setup-in-the-making/260050/31 "2011-08-19T13:59:16Z")
THIS IS A SCRAP BUDGET SET UP. OK?! ---
**Author:** ![Eatonualive](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/eatonualive/32/6442_2.png) [@Eatonualive](https://forums.speedlife.net/u/Eatonualive)\ **Post date:** [August 19, 2011, 2:01pm UTC](https://forums.speedlife.net/t/pics-of-friends-setup-in-the-making/260050/32 "2011-08-19T14:01:46Z")
fast.cheap.relaible…u can only have 2. looks like its fast and relaible ---
**Author:** ![MclarenGP](https://avatars.discourse-cdn.com/v4/letter/m/57b2e6/32.png) [@MclarenGP](https://forums.speedlife.net/u/MclarenGP)\ **Post date:** [August 19, 2011, 2:03pm UTC](https://forums.speedlife.net/t/pics-of-friends-setup-in-the-making/260050/33 "2011-08-19T14:03:13Z")
I appreciate the CC. This kid has made me downpipes and crossovers before that have worked fine, never cracked or fell apart. I have actually had shit hanging completely from his welds and nothing has ever broke, no dingleberrys ever got sucked up. ---
**Author:** ![REDWGN](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/redwgn/32/6695_2.png) [@REDWGN](https://forums.speedlife.net/u/REDWGN)\ **Post date:** [August 19, 2011, 2:12pm UTC](https://forums.speedlife.net/t/pics-of-friends-setup-in-the-making/260050/34 "2011-08-19T14:12:07Z")
He should redo sbardys dumpy TT setup ---
**Author:** ![MclarenGP](https://avatars.discourse-cdn.com/v4/letter/m/57b2e6/32.png) [@MclarenGP](https://forums.speedlife.net/u/MclarenGP)\ **Post date:** [August 19, 2011, 2:12pm UTC](https://forums.speedlife.net/t/pics-of-friends-setup-in-the-making/260050/35 "2011-08-19T14:12:35Z")
wtf and i got negged by psi. someone needs to + rep me now… i was actually in neutral :lol bastards ---
**Author:** ![DeathbyRT](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/deathbyrt/32/6648_2.png) [@DeathbyRT](https://forums.speedlife.net/u/DeathbyRT)\ **Post date:** [August 19, 2011, 2:29pm UTC](https://forums.speedlife.net/t/pics-of-friends-setup-in-the-making/260050/36 "2011-08-19T14:29:58Z")
Ill just neg you again in a few days, its all good. ---
**Author:** ![MclarenGP](https://avatars.discourse-cdn.com/v4/letter/m/57b2e6/32.png) [@MclarenGP](https://forums.speedlife.net/u/MclarenGP)\ **Post date:** [August 19, 2011, 2:33pm UTC](https://forums.speedlife.net/t/pics-of-friends-setup-in-the-making/260050/37 "2011-08-19T14:33:37Z")
**where my dogs at** ---
**Author:** ![MclarenGP](https://avatars.discourse-cdn.com/v4/letter/m/57b2e6/32.png) [@MclarenGP](https://forums.speedlife.net/u/MclarenGP)\ **Post date:** [August 19, 2011, 2:35pm UTC](https://forums.speedlife.net/t/pics-of-friends-setup-in-the-making/260050/38 "2011-08-19T14:35:15Z")
thanks! that was kind. ---
**Author:** ![capitalcrew](https://avatars.discourse-cdn.com/v4/letter/c/e79b87/32.png) [@capitalcrew](https://forums.speedlife.net/u/capitalcrew)\ **Post date:** [August 19, 2011, 2:36pm UTC](https://forums.speedlife.net/t/pics-of-friends-setup-in-the-making/260050/39 "2011-08-19T14:36:38Z")
You’d be red if Vlad wasn’t the rep Nazi. :rofl ---
**Author:** ![MclarenGP](https://avatars.discourse-cdn.com/v4/letter/m/57b2e6/32.png) [@MclarenGP](https://forums.speedlife.net/u/MclarenGP)\ **Post date:** [August 19, 2011, 2:37pm UTC](https://forums.speedlife.net/t/pics-of-friends-setup-in-the-making/260050/40 "2011-08-19T14:37:00Z")
corey you shouldnt have. thanks shady. finally in green woo . [Previous page](https://forums.speedlife.net/t/pics-of-friends-setup-in-the-making/260050.md?page=1) [Next page](https://forums.speedlife.net/t/pics-of-friends-setup-in-the-making/260050.md?page=3)