# polyurethane sheets locally? **URL:** \ **Category:** Shift518 Automotive\ **Created:** [July 22, 2010, 8:10am UTC](https://forums.speedlife.net/t/polyurethane-sheets-locally/253410 "2010-07-22T08:10:32Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![MclarenGP](https://avatars.discourse-cdn.com/v4/letter/m/57b2e6/32.png) [@MclarenGP](https://forums.speedlife.net/u/MclarenGP)\ **Post date:** [July 22, 2010, 8:10am UTC](https://forums.speedlife.net/t/polyurethane-sheets-locally/253410/1 "2010-07-22T08:10:32Z")
Anyone know where to get polyurethane locally? If not ill have to order for a place in texas , just seeing if anyone knew anywhere around here so i dont have to wait… going to need 90a guage in strips 1/2" x 3" x 100" or if thats not possible a regular sheet is fine too. thanks ---
**Author:** ![KrazyKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/krazykid/32/6371_2.png) [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)\ **Post date:** [July 22, 2010, 9:13am UTC](https://forums.speedlife.net/t/polyurethane-sheets-locally/253410/2 "2010-07-22T09:13:35Z")
90 gauge is that like a human hair thin? what are u building? and yeah I have no idea where to get it. lol ---
**Author:** ![bennyfizzle](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bennyfizzle/32/6291_2.png) [@bennyfizzle](https://forums.speedlife.net/u/bennyfizzle)\ **Post date:** [July 22, 2010, 10:10am UTC](https://forums.speedlife.net/t/polyurethane-sheets-locally/253410/3 "2010-07-22T10:10:23Z")
pretty sure 90a is the hardness. op is a goon. ---
**Author:** ![KrazyKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/krazykid/32/6371_2.png) [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)\ **Post date:** [July 22, 2010, 10:48am UTC](https://forums.speedlife.net/t/polyurethane-sheets-locally/253410/4 "2010-07-22T10:48:31Z")
Yes, Mr. Fizzle, you are correct. 90A is a SHORE measurement, not a thickness measurement. ---
**Author:** ![MclarenGP](https://avatars.discourse-cdn.com/v4/letter/m/57b2e6/32.png) [@MclarenGP](https://forums.speedlife.net/u/MclarenGP)\ **Post date:** [July 22, 2010, 1:28pm UTC](https://forums.speedlife.net/t/polyurethane-sheets-locally/253410/5 "2010-07-22T13:28:30Z")
when did i say it was a thickness measurment? i said half inch thick. 90A guage is how hard it is. ---
**Author:** ![MclarenGP](https://avatars.discourse-cdn.com/v4/letter/m/57b2e6/32.png) [@MclarenGP](https://forums.speedlife.net/u/MclarenGP)\ **Post date:** [July 22, 2010, 1:31pm UTC](https://forums.speedlife.net/t/polyurethane-sheets-locally/253410/6 "2010-07-22T13:31:35Z")
double post ---
**Author:** ![KrazyKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/krazykid/32/6371_2.png) [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)\ **Post date:** [July 22, 2010, 1:40pm UTC](https://forums.speedlife.net/t/polyurethane-sheets-locally/253410/7 "2010-07-22T13:40:58Z")
gauge also gage n. 1. a. **A standard or scale of measurement.** b. A standard dimension, quantity, or capacity. 2. An instrument for measuring or testing. 3. A means of estimating or evaluating; a test: a gauge of character. See Synonyms at standard. 4. Nautical The position of a vessel in relation to another vessel and the wind. 5. a. The distance between the two rails of a railroad. b. The distance between two wheels on an axle. 6. The interior diameter of a shotgun barrel as determined by the number of lead balls of a size exactly fitting the barrel that are required to make one pound. Often used in combination: a 12-gauge shotgun. 7. The amount of plaster of Paris combined with common plaster to speed setting of the mixture. **8. Thickness or diameter, as of sheet metal or wire.** Shore durometer: > **[Shore durometer](https://en.wikipedia.org/wiki/Shore_durometer)** > > Durometer is one of several measures of the hardness of a material. Higher numbers indicate harder materials; lower numbers indicate softer materials. Hardness may be defined as a material's resistance to indentation. The durometer scale was defined by Albert Ferdinand Shore, who developed a device to measure Shore hardness in the 1920s. The term durometer is often used to refer to the measurement as well as the instrument itself. Durometer is typically used as a measure of hardness in polymers, ... 90A is and example of a unit measure of Shore, used to measure the hardness of a material. ---
**Author:** ![KrazyKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/krazykid/32/6371_2.png) [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)\ **Post date:** [July 22, 2010, 1:45pm UTC](https://forums.speedlife.net/t/polyurethane-sheets-locally/253410/8 "2010-07-22T13:45:45Z")
and BTW even if you were talking 90Ga… 37ga is 0.0064 of an inch. so 90 Gauge would be microscopic and human hair is 0.00067" in dia. btw /MK430R ---
**Author:** ![MclarenGP](https://avatars.discourse-cdn.com/v4/letter/m/57b2e6/32.png) [@MclarenGP](https://forums.speedlife.net/u/MclarenGP)\ **Post date:** [July 22, 2010, 2:00pm UTC](https://forums.speedlife.net/t/polyurethane-sheets-locally/253410/9 "2010-07-22T14:00:35Z")
i said 90a as in how stiff the material is. clearly stating 1/2 inch after that for thickness, you guys just tryin to bust my balls obviously im not trying to order polyurethan in microscopic thickness or " human hair thin" Also without reading all that i can already tell you that the term Gauge how i used it ( softness/thicknes) would also qualify as # 2 and 3. A unit of testing and a unit of evaluating. ---
**Author:** ![jdaniels](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jdaniels/32/6399_2.png) [@jdaniels](https://forums.speedlife.net/u/jdaniels)\ **Post date:** [July 22, 2010, 2:07pm UTC](https://forums.speedlife.net/t/polyurethane-sheets-locally/253410/10 "2010-07-22T14:07:13Z")
It might work, but it’s still bad English. If you post on Shift518, you shall be torn down. 🙂 ---
**Author:** ![MclarenGP](https://avatars.discourse-cdn.com/v4/letter/m/57b2e6/32.png) [@MclarenGP](https://forums.speedlife.net/u/MclarenGP)\ **Post date:** [July 22, 2010, 2:11pm UTC](https://forums.speedlife.net/t/polyurethane-sheets-locally/253410/11 "2010-07-22T14:11:57Z")
word ---
**Author:** ![jdaniels](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jdaniels/32/6399_2.png) [@jdaniels](https://forums.speedlife.net/u/jdaniels)\ **Post date:** [July 22, 2010, 2:14pm UTC](https://forums.speedlife.net/t/polyurethane-sheets-locally/253410/12 "2010-07-22T14:14:01Z")
> [@FS: 4x100 Stock Honda rims and d16A6 Tranny](https://forums.speedlife.net/t/fs-4x100-stock-honda-rims-and-d16a6-tranny/33684/3): > > word Lol, you know it’s true. Have you ever posted on here (aside from your request for a scavenge pump) and gotten an easy, helpful response? ---
**Author:** ![Bryan90GL-X](https://avatars.discourse-cdn.com/v4/letter/b/f4b2a3/32.png) [@Bryan90GL-X](https://forums.speedlife.net/u/Bryan90GL-X)\ **Post date:** [July 22, 2010, 5:05pm UTC](https://forums.speedlife.net/t/polyurethane-sheets-locally/253410/13 "2010-07-22T17:05:23Z")
[http://www.mcmaster.com](http://www.mcmaster.com) Not local but they ship quick and will probably have any material you will ever need ---
**Author:** ![ninety1two40](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ninety1two40/32/6332_2.png) [@ninety1two40](https://forums.speedlife.net/u/ninety1two40)\ **Post date:** [July 22, 2010, 7:16pm UTC](https://forums.speedlife.net/t/polyurethane-sheets-locally/253410/14 "2010-07-22T19:16:42Z")
What are you building? ---
**Author:** ![stockcarboy](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/stockcarboy/32/6303_2.png) [@stockcarboy](https://forums.speedlife.net/u/stockcarboy)\ **Post date:** [July 22, 2010, 7:24pm UTC](https://forums.speedlife.net/t/polyurethane-sheets-locally/253410/15 "2010-07-22T19:24:38Z")
+1 ---
**Author:** ![Mk4\_30R\_Ban](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mk4_30r_ban/32/6347_2.png) [@Mk4\_30R\_Ban](https://forums.speedlife.net/u/Mk4_30R_Ban)\ **Post date:** [July 22, 2010, 8:16pm UTC](https://forums.speedlife.net/t/polyurethane-sheets-locally/253410/16 "2010-07-22T20:16:28Z")
> [@FS : Fox Body Mustang Body Panels](https://forums.speedlife.net/t/fs-fox-body-mustang-body-panels/32839/16): > > and BTW even if you were talking 90Ga… 37ga is 0.0064 of an inch. so 90 Gauge would be microscopic > > and human hair is 0.00067" in dia. btw > > /MK430R you moron. :retardclap ---
**Author:** ![KrazyKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/krazykid/32/6371_2.png) [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)\ **Post date:** [July 23, 2010, 5:41am UTC](https://forums.speedlife.net/t/polyurethane-sheets-locally/253410/17 "2010-07-23T05:41:45Z")
> [@I sweat profusely when I wear clothes](https://forums.speedlife.net/t/i-sweat-profusely-when-i-wear-clothes/33686/35): > > you moron. :retardclap :lol eagle eye. > [@WTB: Monitor....](https://forums.speedlife.net/t/wtb-monitor/33560/24): > > i said 90a as in how stiff the material is. clearly stating 1/2 inch after that for thickness, you guys just tryin to bust my balls obviously im not trying to order polyurethan in microscopic thickness or " human hair thin" Also without reading all that i can already tell you that the term Gauge how i used it ( softness/thicknes) would also qualify as # 2 and 3. A unit of testing and a unit of evaluating. LOL, allll you had to do was add a comma and 2 letters… “going to need 90a guage **,** in strips **of** 1/2” x 3" x 100" for ratards like me to understand it. :rofl ---
**Author:** ![KrazyKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/krazykid/32/6371_2.png) [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)\ **Post date:** [July 23, 2010, 7:36am UTC](https://forums.speedlife.net/t/polyurethane-sheets-locally/253410/18 "2010-07-23T07:36:42Z")
> [@I sweat profusely when I wear clothes](https://forums.speedlife.net/t/i-sweat-profusely-when-i-wear-clothes/33686/35): > > you moron. :retardclap hahah I just looked and noticed I earned a “.” and scored a -1 rep for this. :hug right back at yeah. ---
**Author:** ![Mk4\_30R\_Ban](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mk4_30r_ban/32/6347_2.png) [@Mk4\_30R\_Ban](https://forums.speedlife.net/u/Mk4_30R_Ban)\ **Post date:** [July 23, 2010, 8:12am UTC](https://forums.speedlife.net/t/polyurethane-sheets-locally/253410/19 "2010-07-23T08:12:51Z")
> [@look in the sky over west seneca](https://forums.speedlife.net/t/look-in-the-sky-over-west-seneca/33704/5): > > hahah I just looked and noticed I earned a “.” and scored a -1 rep for this. > > :hug right back at yeah. whats your deal, go fix your busted trans bro. dont throw me around like we’re boys. you keep on doing it. its pretty obnoxious. ---
**Author:** ![KrazyKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/krazykid/32/6371_2.png) [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)\ **Post date:** [July 23, 2010, 9:13am UTC](https://forums.speedlife.net/t/polyurethane-sheets-locally/253410/20 "2010-07-23T09:13:26Z")
> [@I sweat profusely when I wear clothes](https://forums.speedlife.net/t/i-sweat-profusely-when-i-wear-clothes/33686/59): > > whats your deal, go fix your busted trans bro. dont throw me around like we’re boys. you keep on doing it. its pretty obnoxious. wait wat? that sounded a little gay. I dont follow you. This one time I threw a boy in the sand box at school. He didnt like that. I got grounded. /pjb [Next page](https://forums.speedlife.net/t/polyurethane-sheets-locally/253410.md?page=2)