# POS sentra brakes?

**URL:** <https://forums.speedlife.net/t/pos-sentra-brakes/242233>\
**Category:** Shift518 Automotive\
**Created:** [February 18, 2009, 6:13pm UTC](https://forums.speedlife.net/t/pos-sentra-brakes/242233 "2009-02-18T18:13:45Z")\
**Posts on this page:** 1\
**Showing post:** 28

<div class="post-metadata">

**Author:** ![88slowmarro](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/88slowmarro/32/6339_2.png) [@88slowmarro](https://forums.speedlife.net/u/88slowmarro)\
**Post date:** [February 18, 2009, 7:15pm UTC](https://forums.speedlife.net/t/pos-sentra-brakes/242233/28 "2009-02-18T19:15:57Z")

</div>

> [@Best Shootout clips](https://forums.speedlife.net/t/best-shootout-clips/14382/23):
>
> well it all depends on how much fluid you are getting out when you bleed through the bleeders. if its shooting out big time, the hoses are fine.
> 
> the slides, and carriers should be wire wheeled down anytime you are doing pads. i’ve seen pads that fit so tightly even when the carriers are clean that they need to be notched out a little as well. the slider pins, top/ bottom of the carriers, and the backs of the pads should all be generously greased.
> 
> can you physically move/ wiggle each caliper on the sliders by hand? if not, the slider pins are probably hung up.

im wit cupcake on this one ,he is just resayin what i said in more detail:lol

---

_[View the full topic](https://forums.speedlife.net/t/pos-sentra-brakes/242233)._