# Post a PIC of your latest purchase.
**URL:** https://forums.speedlife.net/t/post-a-pic-of-your-latest-purchase/235672
**Category:** Shift518 Off Topic
**Created:** [February 14, 2008, 1:56pm UTC](https://forums.speedlife.net/t/post-a-pic-of-your-latest-purchase/235672 "2008-02-14T13:56:25Z")
**Posts on this page:** 20
**Page:** 520
### Author:  [@Ilya](https://forums.speedlife.net/u/Ilya)
#### Post date: [April 2, 2011, 4:24pm UTC](https://forums.speedlife.net/t/post-a-pic-of-your-latest-purchase/235672/10381 "2011-04-02T16:24:02Z")
> [@new camera...some pictures](https://forums.speedlife.net/t/new-camera-some-pictures/40808/5):
>
> :facepalm:facepalm:rofl
You got a problem or something? I’m sorry if my brake product selection is not up to the par of your various hoopties, but you don’t know anything about this car (the Y50 M) or that set of brakes so I don’t understand how/why you’re drawing conclusions based on price alone (when I explained to you a couple different scenarios where $$$ isn’t always the best route to go). The recommendation is they are good. We will see.
In essence…fuck off.
---
### Author:  [@cazwrx187](https://forums.speedlife.net/u/cazwrx187)
#### Post date: [April 2, 2011, 4:35pm UTC](https://forums.speedlife.net/t/post-a-pic-of-your-latest-purchase/235672/10382 "2011-04-02T16:35:40Z")
Oh yes my son, we shall see.
---
### Author:  [@PJB](https://forums.speedlife.net/u/PJB)
#### Post date: [April 2, 2011, 5:02pm UTC](https://forums.speedlife.net/t/post-a-pic-of-your-latest-purchase/235672/10383 "2011-04-02T17:02:55Z")
Ive got a set of ebay special drilled and slotted rotors on my Mustang with a good set of Bosch pads and they seem ok but I rarely drive the car anyway.
Before I put them on along with newer Mustang calipers and a 5 lug swap stopping was scary with the factory style shit.
---
### Author:  [@6SPD\_S4](https://forums.speedlife.net/u/6SPD_S4)
#### Post date: [April 2, 2011, 5:03pm UTC](https://forums.speedlife.net/t/post-a-pic-of-your-latest-purchase/235672/10384 "2011-04-02T17:03:47Z")
They warp because they are so large. My s4 has 12.6 inch rotors in the front, warped as a motherfucker. A quick search showed me that yours are also 12.6. A brembo blank would be my choice.
---
### Author:  [@AUDI\_JAY](https://forums.speedlife.net/u/AUDI_JAY)
#### Post date: [April 2, 2011, 5:04pm UTC](https://forums.speedlife.net/t/post-a-pic-of-your-latest-purchase/235672/10385 "2011-04-02T17:04:44Z")
brembo isn’t bad for the money at all. Love my stoptechs though
---
### Author:  [@Ilya](https://forums.speedlife.net/u/Ilya)
#### Post date: [April 2, 2011, 5:15pm UTC](https://forums.speedlife.net/t/post-a-pic-of-your-latest-purchase/235672/10386 "2011-04-02T17:15:46Z")
> [@WT(Borrow) Engine Hoist.](https://forums.speedlife.net/t/wt-borrow-engine-hoist/40776/11):
>
> They warp because they are so large. My s4 has 12.6 inch rotors in the front, warped as a motherfucker. A quick search showed me that yours are also 12.6. A brembo blank would be my choice.
Really? Not because of materials?
How come BBK’s are much harder to warp than the OEM cheap crap? Better design/efficiency of the caliper itself?
---
### Author:  [@6SPD\_S4](https://forums.speedlife.net/u/6SPD_S4)
#### Post date: [April 2, 2011, 5:17pm UTC](https://forums.speedlife.net/t/post-a-pic-of-your-latest-purchase/235672/10387 "2011-04-02T17:17:23Z")
Yeh maybe you are right. A lot of the aftermarket ones seem to hold up well and not warp. But they are a big surface and are more suseptable to warpage one would assume.
---
### Author:  [@tdi\_logik](https://forums.speedlife.net/u/tdi_logik)
#### Post date: [April 2, 2011, 5:24pm UTC](https://forums.speedlife.net/t/post-a-pic-of-your-latest-purchase/235672/10388 "2011-04-02T17:24:58Z")
Get some evo brembs on that bitch not Mickey mouse shitshit
---
### Author:  [@Ilya](https://forums.speedlife.net/u/Ilya)
#### Post date: [April 2, 2011, 5:29pm UTC](https://forums.speedlife.net/t/post-a-pic-of-your-latest-purchase/235672/10389 "2011-04-02T17:29:38Z")
We’ll see. According to other M guys, I’ll be very happy with this. But if I’m not and that ass over there (Caz) is right (that they suck), then I’ll pony up the money for some more legit stuff. Again, I’ll take the opinion of a couple guys already running this setup than that of brand loyalty for now.
---
### Author:  [@kramerbuccs24](https://forums.speedlife.net/u/kramerbuccs24)
#### Post date: [April 2, 2011, 5:39pm UTC](https://forums.speedlife.net/t/post-a-pic-of-your-latest-purchase/235672/10390 "2011-04-02T17:39:19Z")
the best things in life are free
---
### Author:  [@ReDevil](https://forums.speedlife.net/u/ReDevil)
#### Post date: [April 2, 2011, 6:07pm UTC](https://forums.speedlife.net/t/post-a-pic-of-your-latest-purchase/235672/10391 "2011-04-02T18:07:17Z")
Anything fun costs atleast $8 -Cartman
---
### Author:  [@ninety1two40](https://forums.speedlife.net/u/ninety1two40)
#### Post date: [April 2, 2011, 6:09pm UTC](https://forums.speedlife.net/t/post-a-pic-of-your-latest-purchase/235672/10392 "2011-04-02T18:09:20Z")
My cheapo circuitsport drill and slotted front rotors work great!!
---
### Author:  [@Smoosh](https://forums.speedlife.net/u/Smoosh)
#### Post date: [April 2, 2011, 6:16pm UTC](https://forums.speedlife.net/t/post-a-pic-of-your-latest-purchase/235672/10393 "2011-04-02T18:16:29Z")
vmaxx coilovers
Hsport control arms and aero grill
---
### Author:  [@OsoiNA6](https://forums.speedlife.net/u/OsoiNA6)
#### Post date: [April 2, 2011, 7:43pm UTC](https://forums.speedlife.net/t/post-a-pic-of-your-latest-purchase/235672/10394 "2011-04-02T19:43:48Z")
> [@WTB: Car with 35+ mpg](https://forums.speedlife.net/t/wtb-car-with-35-mpg/40799/10):
>
> Really? Not because of materials?
>
> How come BBK’s are much harder to warp than the OEM cheap crap? Better design/efficiency of the caliper itself?
Heat is what causes the rotors to warp. Some brake rotors do have improved materials, but BBK has larger surface area (and in most of them the rotor is thicker as well). Idea behind slotting / etc is to increase surface area and improve ability to remove heat from the rotors. El cheapo dryer hose brake cooling kit could probably help here too- probably not in character with pimpin’ in an Infiniti M though LOL
---
### Author:  [@Vovchandr](https://forums.speedlife.net/u/Vovchandr)
#### Post date: [April 2, 2011, 8:05pm UTC](https://forums.speedlife.net/t/post-a-pic-of-your-latest-purchase/235672/10395 "2011-04-02T20:05:00Z")
> [@FS: JC Penny Gift Card](https://forums.speedlife.net/t/fs-jc-penny-gift-card/40806/3):
>
> Heat is what causes the rotors to warp. Some brake rotors do have improved materials, but BBK has larger surface area (and in most of them the rotor is thicker as well). Idea behind slotting / etc is to increase surface area and improve ability to remove heat from the rotors. El cheapo dryer hose brake cooling kit could probably help here too- probably not in character with pimpin’ in an Infiniti M though LOL
FYI
> ```
> The "Warped" Brake Disc and Other Myths of the Braking System
>
> ```
[http://www.stoptech.com/tech\_info/wp\_warped\_brakedisk.shtml](http://www.stoptech.com/tech_info/wp_warped_brakedisk.shtml)
> **[Examiner is back - Examiner.com](https://examiner.com)**
>
> Examiner has transformed into a major player in financial news. Think stocks, crypto, banks - if it's about money, it's on Examiner.com.
[http://www.dieselpowersite.com/showthread.php?17-Brake-Roughness-and-Vibration-Causes-and-Solutions](http://www.dieselpowersite.com/showthread.php?17-Brake-Roughness-and-Vibration-Causes-and-Solutions)
---
### Author:  [@OsoiNA6](https://forums.speedlife.net/u/OsoiNA6)
#### Post date: [April 2, 2011, 8:20pm UTC](https://forums.speedlife.net/t/post-a-pic-of-your-latest-purchase/235672/10396 "2011-04-02T20:20:30Z")
> [@STI Humpers Unite!](https://forums.speedlife.net/t/sti-humpers-unite/38852/50):
>
> FYI
>
> [http://www.stoptech.com/tech\_info/wp\_warped\_brakedisk.shtml](http://www.stoptech.com/tech_info/wp_warped_brakedisk.shtml)
>
> [Examiner is back - Examiner.com](http://www.examiner.com/auto-in-orlando/there-s-no-such-thing-as-warped-brake-rotors)
>
> [http://www.dieselpowersite.com/showthread.php?17-Brake-Roughness-and-Vibration-Causes-and-Solutions](http://www.dieselpowersite.com/showthread.php?17-Brake-Roughness-and-Vibration-Causes-and-Solutions)
Thanks for the info!
---
### Author:  [@Boxersix](https://forums.speedlife.net/u/Boxersix)
#### Post date: [April 2, 2011, 8:35pm UTC](https://forums.speedlife.net/t/post-a-pic-of-your-latest-purchase/235672/10397 "2011-04-02T20:35:20Z")
> [@STI Humpers Unite!](https://forums.speedlife.net/t/sti-humpers-unite/38852/50):
>
> FYI
>
> [http://www.stoptech.com/tech\_info/wp\_warped\_brakedisk.shtml](http://www.stoptech.com/tech_info/wp_warped_brakedisk.shtml)
>
> [Examiner is back - Examiner.com](http://www.examiner.com/auto-in-orlando/there-s-no-such-thing-as-warped-brake-rotors)
>
> [http://www.dieselpowersite.com/showthread.php?17-Brake-Roughness-and-Vibration-Causes-and-Solutions](http://www.dieselpowersite.com/showthread.php?17-Brake-Roughness-and-Vibration-Causes-and-Solutions)
thank god someone got to posting this before me.
---
### Author:  [@Vovchandr](https://forums.speedlife.net/u/Vovchandr)
#### Post date: [April 2, 2011, 8:37pm UTC](https://forums.speedlife.net/t/post-a-pic-of-your-latest-purchase/235672/10398 "2011-04-02T20:37:32Z")
> [@Motor Trend: Evo X vs. New Sti](https://forums.speedlife.net/t/motor-trend-evo-x-vs-new-sti/40818/3):
>
> thank god someone got to posting this before me.
Your avatar fits you so well :rofl
---
### Author:  [@tdi\_logik](https://forums.speedlife.net/u/tdi_logik)
#### Post date: [April 3, 2011, 9:16pm UTC](https://forums.speedlife.net/t/post-a-pic-of-your-latest-purchase/235672/10399 "2011-04-03T21:16:55Z")
4 brand new dunlops dz101’s for DIRT
---
### Author:  [@Boost\_Creep](https://forums.speedlife.net/u/Boost_Creep)
#### Post date: [April 4, 2011, 5:38am UTC](https://forums.speedlife.net/t/post-a-pic-of-your-latest-purchase/235672/10400 "2011-04-04T05:38:06Z")
> [@iTunes 7.5 wont work for me......HELP](https://forums.speedlife.net/t/itunes-7-5-wont-work-for-me-help/40810/6):
>
> Your avatar fits you so well :rofl
:thumbup
[Previous page](https://forums.speedlife.net/t/post-a-pic-of-your-latest-purchase/235672.md?page=519)
[Next page](https://forums.speedlife.net/t/post-a-pic-of-your-latest-purchase/235672.md?page=521)