# Post your setup and what you think about the parts **URL:** \ **Category:** SON240sx Automotive\ **Created:** [June 28, 2005, 12:31pm UTC](https://forums.speedlife.net/t/post-your-setup-and-what-you-think-about-the-parts/86794 "2005-06-28T12:31:09Z")\ **Posts on this page:** 19\ **Page:** 3
**Author:** ![shinkutat](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shinkutat/32/3203_2.png) [@shinkutat](https://forums.speedlife.net/u/shinkutat)\ **Post date:** [June 15, 2006, 9:07am UTC](https://forums.speedlife.net/t/post-your-setup-and-what-you-think-about-the-parts/86794/41 "2006-06-15T09:07:39Z")
I don’t have a huge list, but: **Centerforce stage 1 clutch:** Feels a bit firmer than stock, never ever slips, definitely worth the money; an OEM clutch bought from the dealership would’ve cost me the same, and this feels better. **2.5" catback exhaust + magnaflow muffler (bought it from 240sxplz):** Good gains throughout the RPM range. 🙂 Awesome sound, it was really, really loud before I had a resonator put on. Now it’s reasonable. Definitely worth the money. **Soon:** Hotshot Header :twisted: ---
**Author:** ![S13Sean](https://avatars.discourse-cdn.com/v4/letter/s/d26b3c/32.png) [@S13Sean](https://forums.speedlife.net/u/S13Sean)\ **Post date:** [August 4, 2006, 7:20pm UTC](https://forums.speedlife.net/t/post-your-setup-and-what-you-think-about-the-parts/86794/42 "2006-08-04T19:20:52Z")
Here’s my setup: 1992 Coupe LE Suspension: KW Variant 3 Coilovers (on the way) ST front and rear sway bars Power Slot rotors F/R Hawk Pads 17" Drag DR14 wheels w/ Fuzion ZRi tires Drivetrain: Unorthodox aluminum flywheel (balanced) Unorthodox 6-pad clutch Unorthodox pressure plate B&M Sport Shifter ( A must have upgrade - incredible difference) Engine KA24DET 9.5:1 Arias pistons polished stock rods w/ARP rod bolts ARP head studs ARP main studs Cometic HG port and polished S14 head Stock cams (Brian Crower cams are next) Full Race tubular manifold w/ HPC HiPer Coat Garrett GT3076R Tial 44mm WG Tial BOV Unorthodox Racing pulley set Unorthodox Underdrive crank pulley 12" FAL cooling fans x2 Fluidyne aluminum radiator Crane Cams Hi6 DSR w Fireball coil AEM EMS w/wideband AEM 3.5 bar Map sensor AEM IAT Custom 3’ exhaust and Vibrant Titanium muffler Avid Racing engine mounts Hahn Racecraft IC and custom IC piping Blitz boost control (on the way) ![http://i45.photobucket.com/albums/f75/EvilS13/Turbo/IMG_1848.jpg](http://i45.photobucket.com/albums/f75/EvilS13/Turbo/IMG_1848.jpg) I don’t have an opinion of the parts because I still have to have the engine tuned however I will say that the AEM EMS is worth every penny as I picked up 14hp and 15 ft/lbs with a very conservative tune over stock. Other: Kick ass custom security system ---
**Author:** ![sil8t](https://avatars.discourse-cdn.com/v4/letter/s/ea666f/32.png) [@sil8t](https://forums.speedlife.net/u/sil8t)\ **Post date:** [July 27, 2007, 12:38pm UTC](https://forums.speedlife.net/t/post-your-setup-and-what-you-think-about-the-parts/86794/43 "2007-07-27T12:38:07Z")
sr20det fmic megan racing manifold apexi super flo(filter n elbow) 3" hks down pipe 3 to 3 1/4 inch fujitsubo exhaust interior ? dash spacro race seat hks evc2 apexi 60mm boost gauge suspension everything megan racing with track coilovers sil eighty conver skyline tails currently building a full out drift car/street car welded to shit ---
**Author:** ![Fobwall](https://avatars.discourse-cdn.com/v4/letter/f/7ea924/32.png) [@Fobwall](https://forums.speedlife.net/u/Fobwall)\ **Post date:** [July 27, 2007, 1:12pm UTC](https://forums.speedlife.net/t/post-your-setup-and-what-you-think-about-the-parts/86794/44 "2007-07-27T13:12:28Z")
> [@Shattered.... HUB?? Shattered? Nope, Sheered](https://forums.speedlife.net/t/shattered-hub-shattered-nope-sheered/13376/5): > > currently building a full out drift car/street car welded to shit Another oxymoron on this board. ---
**Author:** ![P.Ruddy](https://avatars.discourse-cdn.com/v4/letter/p/ee59a6/32.png) [@P.Ruddy](https://forums.speedlife.net/u/P.Ruddy)\ **Post date:** [August 4, 2007, 7:25am UTC](https://forums.speedlife.net/t/post-your-setup-and-what-you-think-about-the-parts/86794/45 "2007-08-04T07:25:57Z")
delete ---
**Author:** ![nwmrkt](https://avatars.discourse-cdn.com/v4/letter/n/aca169/32.png) [@nwmrkt](https://forums.speedlife.net/u/nwmrkt)\ **Post date:** [August 4, 2007, 11:32am UTC](https://forums.speedlife.net/t/post-your-setup-and-what-you-think-about-the-parts/86794/46 "2007-08-04T11:32:30Z")
^^^hurry i want to see this! ---
**Author:** ![Keez](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/keez/32/5570_2.png) [@Keez](https://forums.speedlife.net/u/Keez)\ **Post date:** [August 4, 2007, 12:16pm UTC](https://forums.speedlife.net/t/post-your-setup-and-what-you-think-about-the-parts/86794/47 "2007-08-04T12:16:01Z")
ok i wassnt really gunna do this but im bored so here suspension. megan racing coilovers…i have never had a car with coilovers prior to this other then a 4" drop on my 81 monte carlo, so imo they are awsome, i have em really stiff tho and its a bit annoying but you can live with it edge 3" elbo/downpipe combo.i didnt use the oem one so i oculdnt tell you much diffrence, looks good tho nice finish and what not. bee\*R 3" exhaust no cat. so pretty much 3" all the way from the turbo out bings manual boost controller, i put it on took it for a drive// boosted to 15psi was scary as shit so i took it off lol, then i relised i had messed with the setting before i put it on and it was my prob bings engine damper. not yet installed Taka turbo lines. i installed them for the tubro upgrade later. love em got rid of thoes other stupid end fittings i got the full dash/hud and hud sr20 cluster and the HUD window in my hatch love it but i barley look at the hud so whatever altima dual electric fans, they do the job forsure. i had a viscus lsd untill i broke it so i got my old open diff welded up and now im running that. also a prof blow off valve, im not sure what type of prof bov it is, but its gangster as shit really loud tho. thats all fornow nothing cool really but it works ---
**Author:** ![P.Ruddy](https://avatars.discourse-cdn.com/v4/letter/p/ee59a6/32.png) [@P.Ruddy](https://forums.speedlife.net/u/P.Ruddy)\ **Post date:** [October 24, 2007, 9:49am UTC](https://forums.speedlife.net/t/post-your-setup-and-what-you-think-about-the-parts/86794/48 "2007-10-24T09:49:14Z")
delete ---
**Author:** ![sil8t](https://avatars.discourse-cdn.com/v4/letter/s/ea666f/32.png) [@sil8t](https://forums.speedlife.net/u/sil8t)\ **Post date:** [October 24, 2007, 10:40am UTC](https://forums.speedlife.net/t/post-your-setup-and-what-you-think-about-the-parts/86794/49 "2007-10-24T10:40:41Z")
> [@EVAP System - CEL - Diagnosis help??](https://forums.speedlife.net/t/evap-system-cel-diagnosis-help/13445/4): > > Another oxymoron on this board. how do you figure??? ---
**Author:** ![sil8t](https://avatars.discourse-cdn.com/v4/letter/s/ea666f/32.png) [@sil8t](https://forums.speedlife.net/u/sil8t)\ **Post date:** [October 24, 2007, 11:01am UTC](https://forums.speedlife.net/t/post-your-setup-and-what-you-think-about-the-parts/86794/50 "2007-10-24T11:01:52Z")
> [@Torque Wrenches!!!](https://forums.speedlife.net/t/torque-wrenches/13536/14): > > S13 Seibon Carbon Fibre doors > > These look really nice, but they each need a few hours of fabrication to get all the parts to fit. > > None of the holes are big enought for any hardware and more often then not where you have to install something, it is too thick. It may be 1/32" on the stock door, but on the seibon door it is a 1/4" You will need a rotory tool with a wand extension to reach some places. > Some holes were not even drilled, the holes for the window stopper at the top were not there, the holes for the mirrors were not there, but they were sort of roughed in. > > The weather stripping where the door meets the window does not fit… at all. If the window is down it will tuck inside the door and when you roll it up the window will rub against the door. It does look good when the window is up, it is really flush. I just have to remember to not roll the window down all the way. > > I will get some pics up when it is all done and installed. When I get the second door off I’ll do a weight test and see what is actually saved. > > Later > pATricK shitty deal about the doors. ahh who needs windows anyways ---
**Author:** ![P.Ruddy](https://avatars.discourse-cdn.com/v4/letter/p/ee59a6/32.png) [@P.Ruddy](https://forums.speedlife.net/u/P.Ruddy)\ **Post date:** [January 10, 2008, 1:03pm UTC](https://forums.speedlife.net/t/post-your-setup-and-what-you-think-about-the-parts/86794/51 "2008-01-10T13:03:38Z")
Bucket seat from Battleendless Niec ---
**Author:** ![P.Ruddy](https://avatars.discourse-cdn.com/v4/letter/p/ee59a6/32.png) [@P.Ruddy](https://forums.speedlife.net/u/P.Ruddy)\ **Post date:** [January 10, 2008, 1:07pm UTC](https://forums.speedlife.net/t/post-your-setup-and-what-you-think-about-the-parts/86794/52 "2008-01-10T13:07:22Z")
delete ---
**Author:** ![CrypticNissan](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/crypticnissan/32/5663_2.png) [@CrypticNissan](https://forums.speedlife.net/u/CrypticNissan)\ **Post date:** [January 10, 2008, 3:47pm UTC](https://forums.speedlife.net/t/post-your-setup-and-what-you-think-about-the-parts/86794/53 "2008-01-10T15:47:57Z")
onlything worth noting Greddy Strut bars(front and rear) look nice and clean if properlly installed, small diffrence but its there. less then 5 minutes to install both, just make sure u have a 12MM -wrench- for your rear struts if you still have the rear interior panels on ---
**Author:** ![P.Ruddy](https://avatars.discourse-cdn.com/v4/letter/p/ee59a6/32.png) [@P.Ruddy](https://forums.speedlife.net/u/P.Ruddy)\ **Post date:** [February 3, 2008, 9:29am UTC](https://forums.speedlife.net/t/post-your-setup-and-what-you-think-about-the-parts/86794/54 "2008-02-03T09:29:50Z")
delete ---
**Author:** ![87s15lt1](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/87s15lt1/32/5706_2.png) [@87s15lt1](https://forums.speedlife.net/u/87s15lt1)\ **Post date:** [October 30, 2008, 10:40am UTC](https://forums.speedlife.net/t/post-your-setup-and-what-you-think-about-the-parts/86794/55 "2008-10-30T10:40:34Z")
where is everyone gettin the unorthodox pulley set? i checked their site and found no listing??? i would like to pick a set up along with a bunch of other shit over the winter ---
**Author:** ![imported\_Jared](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/imported_jared/32/5660_2.png) [@imported\_Jared](https://forums.speedlife.net/u/imported_Jared)\ **Post date:** [October 30, 2008, 11:57am UTC](https://forums.speedlife.net/t/post-your-setup-and-what-you-think-about-the-parts/86794/56 "2008-10-30T11:57:20Z")
You don’t have to bring back this old thread to ask a question lol ---
**Author:** ![87s15lt1](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/87s15lt1/32/5706_2.png) [@87s15lt1](https://forums.speedlife.net/u/87s15lt1)\ **Post date:** [October 30, 2008, 12:36pm UTC](https://forums.speedlife.net/t/post-your-setup-and-what-you-think-about-the-parts/86794/57 "2008-10-30T12:36:50Z")
that was not my intention lol? i see many people had unorthodox pulley sets under their list of mods. so i figure rather than opening a pointless and not so beneficial thread to the other members…why not just ask here? so… ---
**Author:** ![Sky14](https://avatars.discourse-cdn.com/v4/letter/s/bcef8e/32.png) [@Sky14](https://forums.speedlife.net/u/Sky14)\ **Post date:** [November 20, 2008, 9:18am UTC](https://forums.speedlife.net/t/post-your-setup-and-what-you-think-about-the-parts/86794/58 "2008-11-20T09:18:29Z")
this thread is sticky no? its ment to be ongoing on? stop being a dick. n 87s15lt1 i can helpu get the parts ur looking for. pm me ---
**Author:** ![kaszab](https://avatars.discourse-cdn.com/v4/letter/k/46a35a/32.png) [@kaszab](https://forums.speedlife.net/u/kaszab)\ **Post date:** [November 28, 2008, 1:44am UTC](https://forums.speedlife.net/t/post-your-setup-and-what-you-think-about-the-parts/86794/59 "2008-11-28T01:44:31Z")
hi i was wondering if anyone had any setup on make a 240sx turn on a stock car track if so message me back it would be a big help thanks. [Previous page](https://forums.speedlife.net/t/post-your-setup-and-what-you-think-about-the-parts/86794.md?page=2)