# Powdercoating Services Available at CRC **URL:** \ **Category:** Vendor Marketplace\ **Created:** [November 18, 2011, 6:14am UTC](https://forums.speedlife.net/t/powdercoating-services-available-at-crc/261382 "2011-11-18T06:14:05Z")\ **Posts on this page:** 20\ **Page:** 10
**Author:** ![97cavy](https://avatars.discourse-cdn.com/v4/letter/9/c5a1d2/32.png) [@97cavy](https://forums.speedlife.net/u/97cavy)\ **Post date:** [March 17, 2012, 5:38am UTC](https://forums.speedlife.net/t/powdercoating-services-available-at-crc/261382/181 "2012-03-17T05:38:34Z")
Hmmm…I wonder if my AK mags could be powdercoated? ![http://t3.gstatic.com/images?q=tbn:ANd9GcQUshYaAEmk91f2ksVPTw1G4tTokMr_vj1_VKGfpumxg3nWTU_nhjPIlYeF](http://t3.gstatic.com/images?q=tbn:ANd9GcQUshYaAEmk91f2ksVPTw1G4tTokMr_vj1_VKGfpumxg3nWTU_nhjPIlYeF) ---
**Author:** ![Johawk](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/johawk/32/6284_2.png) [@Johawk](https://forums.speedlife.net/u/Johawk)\ **Post date:** [March 17, 2012, 6:20am UTC](https://forums.speedlife.net/t/powdercoating-services-available-at-crc/261382/182 "2012-03-17T06:20:10Z")
Im sure they could. But will the jam afterwards. ---
**Author:** ![97cavy](https://avatars.discourse-cdn.com/v4/letter/9/c5a1d2/32.png) [@97cavy](https://forums.speedlife.net/u/97cavy)\ **Post date:** [March 17, 2012, 6:29am UTC](https://forums.speedlife.net/t/powdercoating-services-available-at-crc/261382/183 "2012-03-17T06:29:59Z")
Yeah, I was wondering what the effects on the mag would be. Fun thought, but id rather not fuck anything up! ---
**Author:** ![Sketchy](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/sketchy/32/6378_2.png) [@Sketchy](https://forums.speedlife.net/u/Sketchy)\ **Post date:** [March 17, 2012, 8:26pm UTC](https://forums.speedlife.net/t/powdercoating-services-available-at-crc/261382/184 "2012-03-17T20:26:42Z")
> [@soldier uses quran for target practice](https://forums.speedlife.net/t/soldier-uses-quran-for-target-practice/48610/21): > > HA, they pulled the same shit on me when i sent them my wheels to get coated. they said about 250$ since i had them already stripped and sand blasted. when i went to pick them up, two weeks later, they wanted like 350. after some haggling, 275 was the final price. never going back there. > > mike @ crc ftw:number1 > [@soldier uses quran for target practice](https://forums.speedlife.net/t/soldier-uses-quran-for-target-practice/48610/23): > > For sure Like I said they do good work but trying to jack the price up is bullshit for a set of calipers or rims… or anything really. Anyone that decides to go there I would say get a quote in writing which I failed to do :banghead Thats what happens when everyone that works there has a drug problem. My buddy worked there for over a year. ---
**Author:** ![toomanycamaros](https://avatars.discourse-cdn.com/v4/letter/t/7993a0/32.png) [@toomanycamaros](https://forums.speedlife.net/u/toomanycamaros)\ **Post date:** [March 19, 2012, 9:20am UTC](https://forums.speedlife.net/t/powdercoating-services-available-at-crc/261382/185 "2012-03-19T09:20:18Z")
> [@Ass jockeys at IMAX transit](https://forums.speedlife.net/t/ass-jockeys-at-imax-transit/48623/50): > > Im sure they could. But will the jam afterwards. He might be ok if he disassembled them and masked the internals. How hot does a powder coat oven get? ---
**Author:** ![KrazyKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/krazykid/32/6371_2.png) [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)\ **Post date:** [March 19, 2012, 9:38am UTC](https://forums.speedlife.net/t/powdercoating-services-available-at-crc/261382/186 "2012-03-19T09:38:07Z")
I can just mask off anything that doesnt want to be coated. Also, after the powder is shot on, it can be wiped off with a damp cloth or a wet finger, then tossed in the oven to cure. Leaving the uncovered surfaces 100% as they were. Lowest temp powders I have used are #350F, highest are like #400-415 deg F to fully cure. Most are 400-15 min powders, meaning part temp has to be at 400deg, for atleast 15 minutes to fully cure. ---
**Author:** ![97cavy](https://avatars.discourse-cdn.com/v4/letter/9/c5a1d2/32.png) [@97cavy](https://forums.speedlife.net/u/97cavy)\ **Post date:** [March 19, 2012, 6:50pm UTC](https://forums.speedlife.net/t/powdercoating-services-available-at-crc/261382/187 "2012-03-19T18:50:44Z")
Im willing to sacrifice a mag in the name of trying this out! Wouldnt be hard to strip and tape off the internals ---
**Author:** ![Gundamzeppelin](https://avatars.discourse-cdn.com/v4/letter/g/f4b2a3/32.png) [@Gundamzeppelin](https://forums.speedlife.net/u/Gundamzeppelin)\ **Post date:** [March 20, 2012, 3:59am UTC](https://forums.speedlife.net/t/powdercoating-services-available-at-crc/261382/188 "2012-03-20T03:59:15Z")
> [@FS: 1998 Mistubishi Spyder GS \*\*\*SOLD\*\*\*](https://forums.speedlife.net/t/fs-1998-mistubishi-spyder-gs-sold/43064/30): > > I can just mask off anything that doesnt want to be coated. Also, after the powder is shot on, it can be wiped off with a damp cloth or a wet finger, then tossed in the oven to cure. Leaving the uncovered surfaces 100% as they were. > > Lowest temp powders I have used are #350F, highest are like #400-415 deg F to fully cure. > > Most are 400-15 min powders, meaning part temp has to be at 400deg, for atleast 15 minutes to fully cure. I have a friend doing mine I’ve been waiting a for just my motorcycle rearsets. It only takes 15 mins? ---
**Author:** ![KrazyKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/krazykid/32/6371_2.png) [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)\ **Post date:** [March 20, 2012, 5:54am UTC](https://forums.speedlife.net/t/powdercoating-services-available-at-crc/261382/189 "2012-03-20T05:54:24Z")
> [@Myspace question](https://forums.speedlife.net/t/myspace-question/48735/4): > > Im willing to sacrifice a mag in the name of trying this out! Wouldnt be hard to strip and tape off the internals Bring one by if you want. lets give it a go. What color did you have in mind? > [@¤ ¤ ¤ DENT REMOVAL MEET \*\* 5/5/07 9AM-NOON ¤ ¤ ¤](https://forums.speedlife.net/t/dent-removal-meet-5-5-07-9am-noon/27914/56): > > I have a friend doing mine I’ve been waiting a for just my motorcycle rearsets. It only takes 15 mins? Cure time yes. If they are OEM painted my sandblaster will strip and profile them for powder in about 5-10 mins for something that small. Then its a dust off, clean with denatured alcohol, preheat, shoot, cure, shoot other colors or clear if needed. Entire process for small items like that are about 30 mins or so. Its getting to them, and doing them in batches to be efficient… especially with the big oven that takes time. What color? ---
**Author:** ![97cavy](https://avatars.discourse-cdn.com/v4/letter/9/c5a1d2/32.png) [@97cavy](https://forums.speedlife.net/u/97cavy)\ **Post date:** [March 20, 2012, 3:43pm UTC](https://forums.speedlife.net/t/powdercoating-services-available-at-crc/261382/190 "2012-03-20T15:43:41Z")
Something obnoxious Haha. It’d take more in gas to get out there and back then a mag is worth, so ill just wait till an event to give one to ya or if I’m out that way ---
**Author:** ![KrazyKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/krazykid/32/6371_2.png) [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)\ **Post date:** [March 21, 2012, 6:09am UTC](https://forums.speedlife.net/t/powdercoating-services-available-at-crc/261382/191 "2012-03-21T06:09:27Z")
thats fine! if you pass by the shop or something, call me or text me and ill let you know what car you can just toss it in, incase nobody is there at that time. what ever works man! ---
**Author:** ![Gundamzeppelin](https://avatars.discourse-cdn.com/v4/letter/g/f4b2a3/32.png) [@Gundamzeppelin](https://forums.speedlife.net/u/Gundamzeppelin)\ **Post date:** [March 21, 2012, 8:05pm UTC](https://forums.speedlife.net/t/powdercoating-services-available-at-crc/261382/192 "2012-03-21T20:05:29Z")
> [@FS: 1989 BMW 325i (lots o pics)](https://forums.speedlife.net/t/fs-1989-bmw-325i-lots-o-pics/48737/5): > > Bring one by if you want. lets give it a go. What color did you have in mind? > > Cure time yes. If they are OEM painted my sandblaster will strip and profile them for powder in about 5-10 mins for something that small. Then its a dust off, clean with denatured alcohol, preheat, shoot, cure, shoot other colors or clear if needed. Entire process for small items like that are about 30 mins or so. Its getting to them, and doing them in batches to be efficient… especially with the big oven that takes time. > > What color? I should have checked here first, I have my parts being PC’d Black. this is what they look like currently. If they aren’t worked on by this weekend I am taking them back as is I’ve been waiting since last Monday. Thanks for the info KK ---
**Author:** ![ds50r](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/ds50r/32/3491_2.png) [@ds50r](https://forums.speedlife.net/u/ds50r)\ **Post date:** [March 21, 2012, 8:22pm UTC](https://forums.speedlife.net/t/powdercoating-services-available-at-crc/261382/193 "2012-03-21T20:22:01Z")
Idk if I missed the price sheet but how much for 4 17 inch wheels? ---
**Author:** ![KrazyKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/krazykid/32/6371_2.png) [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)\ **Post date:** [March 22, 2012, 6:20am UTC](https://forums.speedlife.net/t/powdercoating-services-available-at-crc/261382/194 "2012-03-22T06:20:23Z")
> [@hey everyone](https://forums.speedlife.net/t/hey-everyone/48630/22): > > I should have checked here first, I have my parts being PC’d Black. > this is what they look like currently. > > If they aren’t worked on by this weekend I am taking them back as is I’ve been waiting since last Monday. > > Thanks for the info KK Gloss or Matte black? I have a about 4 blacks to choose from. > [@Cool Man Movies: And Questions](https://forums.speedlife.net/t/cool-man-movies-and-questions/48691/16): > > Idk if I missed the price sheet but how much for 4 17 inch wheels? I have yet to post it. I am crunching numbers still for overhead on PC stuff. PM coming for the wheels though. I will tell you the number everyone got when they asked for wheels. It was a rough guess months back when I started this process, so I hope it doesnt go up when I finish my overhead analysis. ---
**Author:** ![JSEnclosures](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jsenclosures/32/6678_2.png) [@JSEnclosures](https://forums.speedlife.net/u/JSEnclosures)\ **Post date:** [March 22, 2012, 6:50am UTC](https://forums.speedlife.net/t/powdercoating-services-available-at-crc/261382/195 "2012-03-22T06:50:14Z")
post some pics of my parts Mike lol ---
**Author:** ![KrazyKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/krazykid/32/6371_2.png) [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)\ **Post date:** [March 22, 2012, 6:54am UTC](https://forums.speedlife.net/t/powdercoating-services-available-at-crc/261382/196 "2012-03-22T06:54:03Z")
I will asap. I am headed there tonight after work, and first thing I am picking up is the manifold and blower, and the gun! Kevins cleaning the calipers and blasting them… we are going to hammer them out tonight. ---
**Author:** ![JSEnclosures](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jsenclosures/32/6678_2.png) [@JSEnclosures](https://forums.speedlife.net/u/JSEnclosures)\ **Post date:** [March 22, 2012, 7:08am UTC](https://forums.speedlife.net/t/powdercoating-services-available-at-crc/261382/197 "2012-03-22T07:08:27Z")
if they get done tonight give me a call, i might not be able to make it over there till after work tomorrow though but let me know. thanks ---
**Author:** ![KrazyKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/krazykid/32/6371_2.png) [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)\ **Post date:** [March 22, 2012, 7:26am UTC](https://forums.speedlife.net/t/powdercoating-services-available-at-crc/261382/198 "2012-03-22T07:26:36Z")
10-4 ill call ya as soon as they are done. Worst comes to worst I can bring them to the shop in amsterdam sat am (i think thats when you said you were starting on it). ---
**Author:** ![JSEnclosures](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/jsenclosures/32/6678_2.png) [@JSEnclosures](https://forums.speedlife.net/u/JSEnclosures)\ **Post date:** [March 22, 2012, 8:02am UTC](https://forums.speedlife.net/t/powdercoating-services-available-at-crc/261382/199 "2012-03-22T08:02:58Z")
need atleast the valve cover no later than friday, doing the install on saturday but i need to drive my car over there ---
**Author:** ![KrazyKid](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/krazykid/32/6371_2.png) [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)\ **Post date:** [March 22, 2012, 8:22am UTC](https://forums.speedlife.net/t/powdercoating-services-available-at-crc/261382/200 "2012-03-22T08:22:59Z")
Gotcah buddy… like I said tonight I am hammering them out for sure. [Previous page](https://forums.speedlife.net/t/powdercoating-services-available-at-crc/261382.md?page=9) [Next page](https://forums.speedlife.net/t/powdercoating-services-available-at-crc/261382.md?page=11)