# Powdercoating Services Available at CRC
**URL:** https://forums.speedlife.net/t/powdercoating-services-available-at-crc/261382
**Category:** Vendor Marketplace
**Created:** [November 18, 2011, 6:14am UTC](https://forums.speedlife.net/t/powdercoating-services-available-at-crc/261382 "2011-11-18T06:14:05Z")
**Posts on this page:** 20
**Page:** 18
### Author:  [@JSEnclosures](https://forums.speedlife.net/u/JSEnclosures)
#### Post date: [March 14, 2013, 8:30am UTC](https://forums.speedlife.net/t/powdercoating-services-available-at-crc/261382/341 "2013-03-14T08:30:19Z")
I will have more s2k parts to drop off very soon
---
### Author:  [@bennyfizzle](https://forums.speedlife.net/u/bennyfizzle)
#### Post date: [March 14, 2013, 8:31am UTC](https://forums.speedlife.net/t/powdercoating-services-available-at-crc/261382/342 "2013-03-14T08:31:00Z")
where the FUCKS my valve cover niggerfaggot
---
### Author:  [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)
#### Post date: [March 14, 2013, 9:44am UTC](https://forums.speedlife.net/t/powdercoating-services-available-at-crc/261382/343 "2013-03-14T09:44:48Z")
its on the shelf. Back right corner to be exact. Next to a 1.8T intake on one side, but infront of a GT35R compressor housing. I can provide GPS tracking if you want to pay the $29.95 for the extra insurance
---
### Author:  [@bennyfizzle](https://forums.speedlife.net/u/bennyfizzle)
#### Post date: [March 14, 2013, 9:49am UTC](https://forums.speedlife.net/t/powdercoating-services-available-at-crc/261382/344 "2013-03-14T09:49:54Z")
can you train a streaming webcam on it so I know it’s progress? thanks
---
### Author:  [@ReDevil](https://forums.speedlife.net/u/ReDevil)
#### Post date: [March 14, 2013, 9:53am UTC](https://forums.speedlife.net/t/powdercoating-services-available-at-crc/261382/345 "2013-03-14T09:53:41Z")
Sounds like youre getting some decent business Mike. Good deal. Will have atleast one set of wheels for you soon!
---
### Author:  [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)
#### Post date: [March 14, 2013, 10:01am UTC](https://forums.speedlife.net/t/powdercoating-services-available-at-crc/261382/346 "2013-03-14T10:01:09Z")
> [@Talk about being left handed....](https://forums.speedlife.net/t/talk-about-being-left-handed/51990/10):
>
> Sounds like youre getting some decent business Mike. Good deal. Will have atleast one set of wheels for you soon!
cool man! bring it on
> [@Post Here If you have Fry as your AV.](https://forums.speedlife.net/t/post-here-if-you-have-fry-as-your-av/51992/12):
>
> can you train a streaming webcam on it so I know it’s progress? thanks
Sure thing I will run to best buy in a moment. brb
---
### Author:  [@bennyfizzle](https://forums.speedlife.net/u/bennyfizzle)
#### Post date: [March 14, 2013, 10:41am UTC](https://forums.speedlife.net/t/powdercoating-services-available-at-crc/261382/347 "2013-03-14T10:41:13Z")
ok thanks
and if there’s so much as a single imperfection I will fucking burn your shit the fuck DOWN
---
### Author:  [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)
#### Post date: [March 14, 2013, 12:15pm UTC](https://forums.speedlife.net/t/powdercoating-services-available-at-crc/261382/348 "2013-03-14T12:15:56Z")
Sooo i cant mushroom stamp it?
---
### Author:  [@crAppAchic0](https://forums.speedlife.net/u/crAppAchic0)
#### Post date: [March 14, 2013, 12:35pm UTC](https://forums.speedlife.net/t/powdercoating-services-available-at-crc/261382/349 "2013-03-14T12:35:01Z")
> [@Benching 225 for reps.........](https://forums.speedlife.net/t/benching-225-for-reps/49916/44):
>
> Sooo i cant mushroom stamp it?
Sure you can, it just has to look PERFECT.
---
### Author:  [@JSEnclosures](https://forums.speedlife.net/u/JSEnclosures)
#### Post date: [March 18, 2013, 10:51am UTC](https://forums.speedlife.net/t/powdercoating-services-available-at-crc/261382/350 "2013-03-18T10:51:08Z")
did you post a pic of that alternator? that was pretty slick!
---
### Author:  [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)
#### Post date: [March 18, 2013, 10:55am UTC](https://forums.speedlife.net/t/powdercoating-services-available-at-crc/261382/351 "2013-03-18T10:55:06Z")
not yet but I will asap…
Valve cover is stripped and the battery bracket thing too… check your pm’s.
Benny, your 2 brackets are done, valve cover is half stripped and ill finish it up tonight and coat it.
---
### Author:  [@bennyfizzle](https://forums.speedlife.net/u/bennyfizzle)
#### Post date: [March 18, 2013, 12:49pm UTC](https://forums.speedlife.net/t/powdercoating-services-available-at-crc/261382/352 "2013-03-18T12:49:39Z")
bracket? dafuq? I didn’t give you no got damn brackets motherfucker
---
### Author:  [@bennyfizzle](https://forums.speedlife.net/u/bennyfizzle)
#### Post date: [March 18, 2013, 12:50pm UTC](https://forums.speedlife.net/t/powdercoating-services-available-at-crc/261382/353 "2013-03-18T12:50:40Z")
you didn’t do the underside of the oil filter lid, or the mating surfaces, right?
or the inside of the tstat housing or where the hoses connect…
---
### Author:  [@Yetti\_VR](https://forums.speedlife.net/u/Yetti_VR)
#### Post date: [March 18, 2013, 4:12pm UTC](https://forums.speedlife.net/t/powdercoating-services-available-at-crc/261382/354 "2013-03-18T16:12:04Z")
Did ALL the things
---
### Author:  [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)
#### Post date: [March 19, 2013, 5:47am UTC](https://forums.speedlife.net/t/powdercoating-services-available-at-crc/261382/355 "2013-03-19T05:47:11Z")
> [@bennyfizzle"](#):
>
> you didn’t do the underside of the oil filter lid, or the mating surfaces, right?
>
> or the inside of the tstat housing or where the hoses connect…
I actually helped you. I noticed a nick on the mating surface on both parts, so I took the liberty to touch them up with the angle grinder. It was going really well, I am very steady and have surgan like precision with my flap disks spinning at 3Krpm. Unfortunatly, I sneezed half way through, and may have put a little too much pressure into the part. So I just took more material off the opposit side. A little RTV will probably seal it fine, if not just carry a few extra qts of oil to top it off as it leaks out.
The tstat housing I fixed the hose connection for you too. I welded on 1" vband clamps to both ends. I figured since you have the car apart I would upsell my services. Just bring me the rubber hoses for the in and out and I will construct new hard lines from titanium for you. You will never have to worry about hoses slipping off again, for the small fee of $1,134.69. Unfortunatly materials prices went up slightly thanks to Obama, so I am sure you will understand.
And your valve cover was accidently run over as I backed a car out and it was drying on the floor. It only broke in half, but it was a clean break. JB weld I found out works wonders, you wont even know.
---
### Author:  [@crAppAchic0](https://forums.speedlife.net/u/crAppAchic0)
#### Post date: [March 19, 2013, 6:15am UTC](https://forums.speedlife.net/t/powdercoating-services-available-at-crc/261382/356 "2013-03-19T06:15:26Z")
And the mushroom stamp?
---
### Author:  [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)
#### Post date: [March 19, 2013, 6:18am UTC](https://forums.speedlife.net/t/powdercoating-services-available-at-crc/261382/357 "2013-03-19T06:18:22Z")
It was very hot, I unfortunately learned my lesson.
but the deed was done.
---
### Author:  [@crAppAchic0](https://forums.speedlife.net/u/crAppAchic0)
#### Post date: [March 19, 2013, 6:20am UTC](https://forums.speedlife.net/t/powdercoating-services-available-at-crc/261382/358 "2013-03-19T06:20:30Z")
The truly dicktone valve cover.
---
### Author:  [@Skidplate](https://forums.speedlife.net/u/Skidplate)
#### Post date: [March 19, 2013, 6:50am UTC](https://forums.speedlife.net/t/powdercoating-services-available-at-crc/261382/359 "2013-03-19T06:50:02Z")
i have a valve cover from my truck. i dont know if i want to p/c it or just polish it. could you give me an estimate of how much it’d be to powdercoat it?
looks exactly like this, but it’s covered in blue spray paint, and looks like shit
---
### Author:  [@KrazyKid](https://forums.speedlife.net/u/KrazyKid)
#### Post date: [March 19, 2013, 7:16am UTC](https://forums.speedlife.net/t/powdercoating-services-available-at-crc/261382/360 "2013-03-19T07:16:45Z")
[http://shift518.com/showthread.php?t=30359](http://shift518.com/showthread.php?t=30359)
-Valve cover (inline 4/6 cylinder). $65 single solid color. +$30ea for each additional coat/color. +$25ea for candy colors. +$5 for flake added to a clear. +$15 for polished letters or raised edges.
what color were you thinking?
[Previous page](https://forums.speedlife.net/t/powdercoating-services-available-at-crc/261382.md?page=17)
[Next page](https://forums.speedlife.net/t/powdercoating-services-available-at-crc/261382.md?page=19)