# Powdercoating Services Available at CRC

**URL:** <https://forums.speedlife.net/t/powdercoating-services-available-at-crc/261382>\
**Category:** Vendor Marketplace\
**Created:** [November 18, 2011, 6:14am UTC](https://forums.speedlife.net/t/powdercoating-services-available-at-crc/261382 "2011-11-18T06:14:05Z")\
**Posts on this page:** 1\
**Showing post:** 188

<div class="post-metadata">

**Author:** ![Gundamzeppelin](https://avatars.discourse-cdn.com/v4/letter/g/f4b2a3/32.png) [@Gundamzeppelin](https://forums.speedlife.net/u/Gundamzeppelin)\
**Post date:** [March 20, 2012, 3:59am UTC](https://forums.speedlife.net/t/powdercoating-services-available-at-crc/261382/188 "2012-03-20T03:59:15Z")

</div>

> [@FS: 1998 Mistubishi Spyder GS \*\*\*SOLD\*\*\*](https://forums.speedlife.net/t/fs-1998-mistubishi-spyder-gs-sold/43064/30):
>
> I can just mask off anything that doesnt want to be coated. Also, after the powder is shot on, it can be wiped off with a damp cloth or a wet finger, then tossed in the oven to cure. Leaving the uncovered surfaces 100% as they were.
> 
> Lowest temp powders I have used are #350F, highest are like #400-415 deg F to fully cure.
> 
> Most are 400-15 min powders, meaning part temp has to be at 400deg, for atleast 15 minutes to fully cure.

I have a friend doing mine I’ve been waiting a for just my motorcycle rearsets. It only takes 15 mins?

---

_[View the full topic](https://forums.speedlife.net/t/powdercoating-services-available-at-crc/261382)._