# power windows/locks

**URL:** https://forums.speedlife.net/t/power-windows-locks/101168
**Category:** SON240sx Automotive
**Created:** [October 26, 2006, 6:39pm UTC](https://forums.speedlife.net/t/power-windows-locks/101168 "2006-10-26T18:39:52Z")
**Posts on this page:** 3
**Page:** 1

<div class="post-metadata">

### Author: ![kid\_z\_ero](https://avatars.discourse-cdn.com/v4/letter/k/c2a13f/32.png) [@kid\_z\_ero](https://forums.speedlife.net/u/kid_z_ero)
#### Post date: [October 26, 2006, 6:39pm UTC](https://forums.speedlife.net/t/power-windows-locks/101168/1 "2006-10-26T18:39:52Z")

</div>

has anyone change manual handles to power windows/locks before?  
just curious if it’s easy to do or not.

---

<div class="post-metadata">

### Author: ![tosh](https://avatars.discourse-cdn.com/v4/letter/t/58956e/32.png) [@tosh](https://forums.speedlife.net/u/tosh)
#### Post date: [October 26, 2006, 8:26pm UTC](https://forums.speedlife.net/t/power-windows-locks/101168/2 "2006-10-26T20:26:34Z")

</div>

there is a write up in the faq section. if you got the wiring harness for  
the power windows/doors/mirrors it is a pulg and play swap.

parts needed

pw track and motor  
pw switch  
pw actuator  
pdl actuator  
power mirrors if you want em  
wiring harness  
door skins

if you can find someone parting a 240 out, just strip the doors and transfer  
everything over.

peace

---

<div class="post-metadata">

### Author: ![jcs13\_90](https://avatars.discourse-cdn.com/v4/letter/j/48db29/32.png) [@jcs13\_90](https://forums.speedlife.net/u/jcs13_90)
#### Post date: [October 27, 2006, 7:36am UTC](https://forums.speedlife.net/t/power-windows-locks/101168/3 "2006-10-27T07:36:22Z")

</div>

it takes a while i grabbed my parts off alex(tosh) and then Ted and I installed it, i hope you know a lot about wiring