# powersteering pulley

**URL:** <https://forums.speedlife.net/t/powersteering-pulley/96753>\
**Category:** SON240sx Automotive\
**Created:** [June 8, 2006, 8:04pm UTC](https://forums.speedlife.net/t/powersteering-pulley/96753 "2006-06-08T20:04:07Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![a\_ahmed](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/a_ahmed/32/5411_2.png) [@a\_ahmed](https://forums.speedlife.net/u/a_ahmed)\
**Post date:** [June 8, 2006, 8:04pm UTC](https://forums.speedlife.net/t/powersteering-pulley/96753/1 "2006-06-08T20:04:07Z")

</div>

Hey guys,

got a bit of an issue here.

My car is at the mechanic, a friend of a friend, and he’s started working on my car, he installed the hicas stopper, etc… and was bout to instal lthe non hicas ps pump (a 95), when suddenly a prob came up.

The old 91 pump (hicas) has 4 grooves on the pulley.

The new used 95 pump i got, has 3 grooves.

The pulley on the old 91 pump is welded in and doesnt get off :? so now… what to do?

---

<div class="post-metadata">

**Author:** ![Jedi\_Car\_Fan](https://avatars.discourse-cdn.com/v4/letter/j/b9e5f3/32.png) [@Jedi\_Car\_Fan](https://forums.speedlife.net/u/Jedi_Car_Fan)\
**Post date:** [June 9, 2006, 6:57am UTC](https://forums.speedlife.net/t/powersteering-pulley/96753/2 "2006-06-09T06:57:26Z")

</div>

just use the hicas PS pump

you can take a part the back and and remove a few parts which will then elimate the rear from supplying the hicas (then you just plug the line coming from the pump that would goto the hicas)

there is a whole write up on [ww.240sxforums.com](http://ww.240sxforums.com) and how to do it

---

<div class="post-metadata">

**Author:** ![Jedi\_Car\_Fan](https://avatars.discourse-cdn.com/v4/letter/j/b9e5f3/32.png) [@Jedi\_Car\_Fan](https://forums.speedlife.net/u/Jedi_Car_Fan)\
**Post date:** [June 9, 2006, 7:08am UTC](https://forums.speedlife.net/t/powersteering-pulley/96753/3 "2006-06-09T07:08:42Z")

</div>

#1 remove the rear Cover

![http://img.photobucket.com/albums/v116/grey240drift/IMG_0901.jpg](http://img.photobucket.com/albums/v116/grey240drift/IMG_0901.jpg)

#2 remove all the little square tabs

![http://img.photobucket.com/albums/v116/grey240drift/IMG_0906.jpg](http://img.photobucket.com/albums/v116/grey240drift/IMG_0906.jpg)

![http://img.photobucket.com/albums/v116/grey240drift/IMG_0907.jpg](http://img.photobucket.com/albums/v116/grey240drift/IMG_0907.jpg)

#3 put the cover back on

![http://img.photobucket.com/albums/v116/grey240drift/IMG_0901.jpg](http://img.photobucket.com/albums/v116/grey240drift/IMG_0901.jpg)

#4 plug up the rear hole so that it wont leak and your done

---

<div class="post-metadata">

**Author:** ![a\_ahmed](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/a_ahmed/32/5411_2.png) [@a\_ahmed](https://forums.speedlife.net/u/a_ahmed)\
**Post date:** [June 9, 2006, 1:24pm UTC](https://forums.speedlife.net/t/powersteering-pulley/96753/4 "2006-06-09T13:24:17Z")

</div>

yeah but the problem is my pump is busted, hence the need for the new one 😛

Nice visual info though :thumbup: it should be stickied as people asked about this before (how to convert the hicas pump to this).

But yeah… mine is busted… so…