# Procede V3 Rev1 with PNP Harness & o2 Sims

**URL:** <https://forums.speedlife.net/t/procede-v3-rev1-with-pnp-harness-o2-sims/75413>\
**Category:** Classifieds\
**Created:** [October 27, 2009, 6:13pm UTC](https://forums.speedlife.net/t/procede-v3-rev1-with-pnp-harness-o2-sims/75413 "2009-10-27T18:13:48Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jeller](https://avatars.discourse-cdn.com/v4/letter/j/bc8723/32.png) [@Jeller](https://forums.speedlife.net/u/Jeller)\
**Post date:** [October 27, 2009, 6:13pm UTC](https://forums.speedlife.net/t/procede-v3-rev1-with-pnp-harness-o2-sims/75413/1 "2009-10-27T18:13:48Z")

</div>

**SOLD**

Location: Clarence/Williamsville

Procede V3 Rev1 with Plug & Play Harness:  
2-remotes for map switching  
Bypass Plugs  
DIY o2 Sims

DIY O2 sims following shivs post here: [http://www.e90post.com/forums/showthread.php?t=151315](http://www.e90post.com/forums/showthread.php?t=151315)  
They are not installed currenty, but install very easily by removing 2 wires and connecting up the male/female spade I added to the ground wire, this makes them easily removeable. Read the DIY above. I had them on for 8K with no issues.

Only item you will need is the USB to serial cable if you want to run the cable into the glove box.

![http://img.photobucket.com/albums/v114/jeller/335i/IMG_2601.jpg](http://img.photobucket.com/albums/v114/jeller/335i/IMG_2601.jpg)

PM me with any other questions or if you would like to purchase.

Thanks 👍

Jeller