# Project 180sx **URL:** \ **Category:** Builds\ **Created:** [March 22, 2010, 1:18pm UTC](https://forums.speedlife.net/t/project-180sx/151992 "2010-03-22T13:18:45Z")\ **Posts on this page:** 20\ **Page:** 3
**Author:** ![nickdestcroix](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nickdestcroix/32/5766_2.png) [@nickdestcroix](https://forums.speedlife.net/u/nickdestcroix)\ **Post date:** [May 14, 2010, 1:27am UTC](https://forums.speedlife.net/t/project-180sx/151992/41 "2010-05-14T01:27:43Z")
… i love how both son and zilvia my threads have turned into discussions about lhd s15 dash… wheres face when you need him lol ---
**Author:** ![02GD\_Wagon](https://avatars.discourse-cdn.com/v4/letter/0/cdc98d/32.png) [@02GD\_Wagon](https://forums.speedlife.net/u/02GD_Wagon)\ **Post date:** [May 14, 2010, 10:01pm UTC](https://forums.speedlife.net/t/project-180sx/151992/42 "2010-05-14T22:01:43Z")
Because you fail to keep updates coming and on topic. 😃 ---
**Author:** ![nickdestcroix](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nickdestcroix/32/5766_2.png) [@nickdestcroix](https://forums.speedlife.net/u/nickdestcroix)\ **Post date:** [June 13, 2010, 5:24am UTC](https://forums.speedlife.net/t/project-180sx/151992/43 "2010-06-13T05:24:16Z")
Bings Aluminum solid sub frame inserts, and fresh paint ![http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs332.snc3/29231_401022741244_504706244_4823355_5237659_n.jpg](http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs332.snc3/29231_401022741244_504706244_4823355_5237659_n.jpg) ![http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs333.snc3/29281_402434146244_504706244_4859133_7652867_n.jpg](http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs333.snc3/29281_402434146244_504706244_4859133_7652867_n.jpg) ![http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs342.ash1/29281_402434156244_504706244_4859134_4640849_n.jpg](http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs342.ash1/29281_402434156244_504706244_4859134_4640849_n.jpg) Have Energy suspension Master Kit to install also, and will have some spare bits from it for sale later (ruca poly urethane bushings, Front Tension Control Arm bushings, sub frame insert bushings) if you need any of these let me know and I’ll sell for cheap ---
**Author:** ![BoOsT-HuNgRy](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/boost-hungry/32/5721_2.png) [@BoOsT-HuNgRy](https://forums.speedlife.net/u/BoOsT-HuNgRy)\ **Post date:** [June 13, 2010, 5:31am UTC](https://forums.speedlife.net/t/project-180sx/151992/44 "2010-06-13T05:31:35Z")
motor ??? ---
**Author:** ![nickdestcroix](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nickdestcroix/32/5766_2.png) [@nickdestcroix](https://forums.speedlife.net/u/nickdestcroix)\ **Post date:** [July 13, 2010, 7:04pm UTC](https://forums.speedlife.net/t/project-180sx/151992/45 "2010-07-13T19:04:45Z")
New Bushings and cleaned up and repainted ![http://i917.photobucket.com/albums/ad12/nickdestcroix/731985f6.jpg](http://i917.photobucket.com/albums/ad12/nickdestcroix/731985f6.jpg) ---
**Author:** ![braden](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/braden/32/5757_2.png) [@braden](https://forums.speedlife.net/u/braden)\ **Post date:** [July 26, 2010, 10:14pm UTC](https://forums.speedlife.net/t/project-180sx/151992/46 "2010-07-26T22:14:08Z")
im impressed nick keep it up ---
**Author:** ![nickdestcroix](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nickdestcroix/32/5766_2.png) [@nickdestcroix](https://forums.speedlife.net/u/nickdestcroix)\ **Post date:** [August 15, 2010, 5:27pm UTC](https://forums.speedlife.net/t/project-180sx/151992/47 "2010-08-15T17:27:57Z")
type x anyone ? ![http://i917.photobucket.com/albums/ad12/nickdestcroix/f33370ff.jpg](http://i917.photobucket.com/albums/ad12/nickdestcroix/f33370ff.jpg) ---
**Author:** ![kapetajr](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/kapetajr/32/5445_2.png) [@kapetajr](https://forums.speedlife.net/u/kapetajr)\ **Post date:** [August 15, 2010, 5:38pm UTC](https://forums.speedlife.net/t/project-180sx/151992/48 "2010-08-15T17:38:46Z")
Nice job nick, Now to the real question…Where the motor? lol ---
**Author:** ![white240](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/white240/32/5651_2.png) [@white240](https://forums.speedlife.net/u/white240)\ **Post date:** [August 16, 2010, 12:06pm UTC](https://forums.speedlife.net/t/project-180sx/151992/49 "2010-08-16T12:06:58Z")
This is going to be a VERY well built car. when it gets a motor! ---
**Author:** ![nickdestcroix](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nickdestcroix/32/5766_2.png) [@nickdestcroix](https://forums.speedlife.net/u/nickdestcroix)\ **Post date:** [August 16, 2010, 3:49pm UTC](https://forums.speedlife.net/t/project-180sx/151992/50 "2010-08-16T15:49:10Z")
It’s got a motor sitting in silence ATM lol will be in soon enough ---
**Author:** ![sonfc](https://avatars.discourse-cdn.com/v4/letter/s/a88e57/32.png) [@sonfc](https://forums.speedlife.net/u/sonfc)\ **Post date:** [August 16, 2010, 9:17pm UTC](https://forums.speedlife.net/t/project-180sx/151992/51 "2010-08-16T21:17:59Z")
looks like its going to be a bomb car I love the dash ---
**Author:** ![Sato\_Tatsuya](https://avatars.discourse-cdn.com/v4/letter/s/e36b37/32.png) [@Sato\_Tatsuya](https://forums.speedlife.net/u/Sato_Tatsuya)\ **Post date:** [August 23, 2010, 6:56am UTC](https://forums.speedlife.net/t/project-180sx/151992/52 "2010-08-23T06:56:48Z")
I love the conversion buddy! I wanna do this kind of conversion, but on a LHD, with the center console modified for the LHD (ie. ebrake on the left hand side). How much did it all cost ya in the end?? Cheers, Tatsu ---
**Author:** ![nickdestcroix](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nickdestcroix/32/5766_2.png) [@nickdestcroix](https://forums.speedlife.net/u/nickdestcroix)\ **Post date:** [August 23, 2010, 9:41pm UTC](https://forums.speedlife.net/t/project-180sx/151992/53 "2010-08-23T21:41:55Z")
It was up there and I had to have some centerconsole parts shipped from hong kong, so all in all it was about 700 lol not cheap … But it is pretty sharp looking, it’s probably cheaper for you to find a lhd composite already made, or if you can find one for pretty cheap cause of rough condition, but yea check out your options and be prepared to spend some cash haha ---
**Author:** ![Noobie240](https://avatars.discourse-cdn.com/v4/letter/n/b487fb/32.png) [@Noobie240](https://forums.speedlife.net/u/Noobie240)\ **Post date:** [August 25, 2010, 6:09am UTC](https://forums.speedlife.net/t/project-180sx/151992/54 "2010-08-25T06:09:44Z")
Does the Cluster work in a s13 dash? ---
**Author:** ![nickdestcroix](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nickdestcroix/32/5766_2.png) [@nickdestcroix](https://forums.speedlife.net/u/nickdestcroix)\ **Post date:** [August 25, 2010, 11:44am UTC](https://forums.speedlife.net/t/project-180sx/151992/55 "2010-08-25T11:44:57Z")
Not really no, it’s different sizes you’d have to cut the s13 dash to make it fit vertically and then you’d have big gaps on either side, allso the wiring on the cluster is different swell and would require allot if effort, mines not wired up I will probably just make a custom plate and duplicate the look/style of the cluster with custom guages long term I might offer the s15 cluster up for sale. My opinion just modify the s13 cluster change the gauge faces add some lights And shit lol. ---
**Author:** ![Noobie240](https://avatars.discourse-cdn.com/v4/letter/n/b487fb/32.png) [@Noobie240](https://forums.speedlife.net/u/Noobie240)\ **Post date:** [August 25, 2010, 6:53pm UTC](https://forums.speedlife.net/t/project-180sx/151992/56 "2010-08-25T18:53:49Z")
hahah Tru but its so freash and so clean!!! lol ---
**Author:** ![agent240sx](https://avatars.discourse-cdn.com/v4/letter/a/7ea924/32.png) [@agent240sx](https://forums.speedlife.net/u/agent240sx)\ **Post date:** [September 9, 2010, 7:21pm UTC](https://forums.speedlife.net/t/project-180sx/151992/57 "2010-09-09T19:21:42Z")
S15 Dash into s13 S15 interior door panels in s13 Part 1 Part 2 s15 roof liner in s13 SEMI Finished product Hopefully these videos will help you or anyone else interested in the interior conversion ---
**Author:** ![nickdestcroix](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nickdestcroix/32/5766_2.png) [@nickdestcroix](https://forums.speedlife.net/u/nickdestcroix)\ **Post date:** [September 26, 2010, 9:36am UTC](https://forums.speedlife.net/t/project-180sx/151992/58 "2010-09-26T09:36:42Z")
befor and after cleaning and painting of headlight bracket/Assembly ![http://i917.photobucket.com/albums/ad12/nickdestcroix/9dd49533.jpg](http://i917.photobucket.com/albums/ad12/nickdestcroix/9dd49533.jpg) ![http://i917.photobucket.com/albums/ad12/nickdestcroix/5e223a0e.jpg](http://i917.photobucket.com/albums/ad12/nickdestcroix/5e223a0e.jpg) most recent picture of car i guess haha ![http://i917.photobucket.com/albums/ad12/nickdestcroix/6a585de0.jpg](http://i917.photobucket.com/albums/ad12/nickdestcroix/6a585de0.jpg) … yea thats a e scooter … my sister rides it lol ---
**Author:** ![OneEightZero](https://avatars.discourse-cdn.com/v4/letter/o/c6cbf5/32.png) [@OneEightZero](https://forums.speedlife.net/u/OneEightZero)\ **Post date:** [September 26, 2010, 1:27pm UTC](https://forums.speedlife.net/t/project-180sx/151992/59 "2010-09-26T13:27:23Z")
More shots of the scooter? Jks, Those headlight brackets looks mint, what did you use to clean them up? ---
**Author:** ![nickdestcroix](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nickdestcroix/32/5766_2.png) [@nickdestcroix](https://forums.speedlife.net/u/nickdestcroix)\ **Post date:** [October 12, 2010, 12:31pm UTC](https://forums.speedlife.net/t/project-180sx/151992/60 "2010-10-12T12:31:05Z")
> [@OneEightZero](#): > > More shots of the scooter? > > Jks, Those headlight brackets looks mint, what did you use to clean them up? used brake clean to clean the filth off them then basically just sanded down the rusty areas to the bare metal and scuffed up the rest of the paint with some scotch pads and sand paper then just sprayed em with some rust paint and good as new lol [Previous page](https://forums.speedlife.net/t/project-180sx/151992.md?page=2) [Next page](https://forums.speedlife.net/t/project-180sx/151992.md?page=4)