# project "GET HEAD"
**URL:** https://forums.speedlife.net/t/project-get-head/240546
**Category:** Shift518 Automotive
**Created:** [December 3, 2008, 6:19pm UTC](https://forums.speedlife.net/t/project-get-head/240546 "2008-12-03T18:19:29Z")
**Posts on this page:** 14
**Page:** 1
### Author:  [@1evilzr1](https://forums.speedlife.net/u/1evilzr1)
#### Post date: [December 3, 2008, 6:19pm UTC](https://forums.speedlife.net/t/project-get-head/240546/1 "2008-12-03T18:19:29Z")
project “get head” is in full swing… We re-dynoed my car last night w/ the stock wheels to get a baseline 550rwhp 500rwtq, did a leakdown and compression test which both came out good, and got the heads off and in the mail today. I am bumping the compression up a little bit along w/ porting and polishing of both the intake and exhaust ports. After they are bolted back ons w/ apr stud bolts a ported TB and ported Intake will finish out my head package. I am hoping to see close to 600rwhp NA, and then hit it w/ the biggest shot of gas i can w/o de tuning. Spring can’t get here soon enough!!! :drink
---
### Author:  [@SSmokinn\_SS](https://forums.speedlife.net/u/SSmokinn_SS)
#### Post date: [December 3, 2008, 6:20pm UTC](https://forums.speedlife.net/t/project-get-head/240546/2 "2008-12-03T18:20:30Z")
I hope you will get 600 N/A…that would be sick
---
### Author:  [@Mk4\_30R\_Ban](https://forums.speedlife.net/u/Mk4_30R_Ban)
#### Post date: [December 3, 2008, 6:21pm UTC](https://forums.speedlife.net/t/project-get-head/240546/3 "2008-12-03T18:21:52Z")
can i have a chunk of the block if it explodes from the biggest shot in the world? :ohnoes
---
### Author:  [@1evilzr1](https://forums.speedlife.net/u/1evilzr1)
#### Post date: [December 3, 2008, 6:24pm UTC](https://forums.speedlife.net/t/project-get-head/240546/4 "2008-12-03T18:24:19Z")
it will only be a small shot 50-100MAX!
---
### Author:  [@Mk4\_30R\_Ban](https://forums.speedlife.net/u/Mk4_30R_Ban)
#### Post date: [December 3, 2008, 6:24pm UTC](https://forums.speedlife.net/t/project-get-head/240546/5 "2008-12-03T18:24:50Z")
> [@c6z06six70rwhp](#):
>
> it will only be a small shot 50-100MAX!
well. if the worst case becomes reality, can i have a piece?
---
### Author:  [@1evilzr1](https://forums.speedlife.net/u/1evilzr1)
#### Post date: [December 3, 2008, 6:28pm UTC](https://forums.speedlife.net/t/project-get-head/240546/6 "2008-12-03T18:28:36Z")
it wont!
---
### Author:  [@Hank1](https://forums.speedlife.net/u/Hank1)
#### Post date: [December 3, 2008, 6:32pm UTC](https://forums.speedlife.net/t/project-get-head/240546/7 "2008-12-03T18:32:04Z")
> [@c6z06six70rwhp](#):
>
> project “get head” is in full swing… We re-dynoed my car last night w/ the stock wheels to get a baseline 550rwhp 500rwtq, did a leakdown and compression test which both came out good, and got the heads off and in the mail today. I am bumping the compression up a little bit along w/ porting and polishing of both the intake and exhaust ports. After they are bolted back ons w/ apr stud bolts a ported TB and ported Intake will finish out my head package. I am hoping to see close to 600rwhp NA, and then hit it w/ the biggest shot of gas i can w/o de tuning. Spring can’t get here soon enough!!! :drink
spring can wait… i got alot of sheet metal left to do in the car and another motor to build… :idiots :angry2
---
### Author:  [@Boost\_Creep](https://forums.speedlife.net/u/Boost_Creep)
#### Post date: [December 3, 2008, 6:36pm UTC](https://forums.speedlife.net/t/project-get-head/240546/8 "2008-12-03T18:36:33Z")
Good stuff, you should just hire Howard full time to work on your car…
---
### Author:  [@1evilzr1](https://forums.speedlife.net/u/1evilzr1)
#### Post date: [December 3, 2008, 6:40pm UTC](https://forums.speedlife.net/t/project-get-head/240546/9 "2008-12-03T18:40:19Z")
haha yah, i like going down there and hanging out and screwing around. Its the only thing that will keep me sane all winter.
---
### Author:  [@Boost\_Creep](https://forums.speedlife.net/u/Boost_Creep)
#### Post date: [December 3, 2008, 6:44pm UTC](https://forums.speedlife.net/t/project-get-head/240546/10 "2008-12-03T18:44:38Z")
> [@Hank](#):
>
> spring can wait… i got alot of sheet metal left to do in the car and another motor to build… :idiots :angry2
Hank,
You do fab work right? How much for a 4inch chrome/polished piece of aluminum or whatever you use, from my turbo down through my engine bay… figure three feet or so?
---
### Author:  [@Boost\_Creep](https://forums.speedlife.net/u/Boost_Creep)
#### Post date: [December 3, 2008, 6:44pm UTC](https://forums.speedlife.net/t/project-get-head/240546/11 "2008-12-03T18:44:54Z")
> [@c6z06six70rwhp](#):
>
> haha yah, i like going down there and hanging out and screwing around. Its the only thing that will keep me sane all winter.
Yea, winter gives me time to save/build my car.
---
### Author:  [@tdi\_logik](https://forums.speedlife.net/u/tdi_logik)
#### Post date: [December 3, 2008, 6:49pm UTC](https://forums.speedlife.net/t/project-get-head/240546/12 "2008-12-03T18:49:26Z")
are you installing the heads yourself? or are you just gonna bring it to howard and have him do it all?
---
### Author:  [@1evilzr1](https://forums.speedlife.net/u/1evilzr1)
#### Post date: [December 3, 2008, 6:56pm UTC](https://forums.speedlife.net/t/project-get-head/240546/13 "2008-12-03T18:56:46Z")
its @ howards w/ the heads off the car, im sure ill get my hands dirty when they get back…
---
### Author:  [@MikeyB](https://forums.speedlife.net/u/MikeyB)
#### Post date: [December 3, 2008, 8:18pm UTC](https://forums.speedlife.net/t/project-get-head/240546/14 "2008-12-03T20:18:26Z")
Damn son.600rwhp.That is friggin awsome.Thank god winter is here so i can get some shit done but thank god for Tonys projects is keeping me motivated…