# Project "Intimidator 408" **URL:** \ **Category:** Builds\ **Created:** [October 22, 2006, 5:45pm UTC](https://forums.speedlife.net/t/project-intimidator-408/185767 "2006-10-22T17:45:58Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![Quik](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/quik/32/5979_2.png) [@Quik](https://forums.speedlife.net/u/Quik)\ **Post date:** [October 22, 2006, 5:45pm UTC](https://forums.speedlife.net/t/project-intimidator-408/185767/1 "2006-10-22T17:45:58Z")
well its almost winter now and almost time to start working on the new setup. heres a few of the new goodies first up is a L76 intake from the austrialian elcamino. it has a 90mm TB opening as you can see by comparing it to the tape measure its quite large ---
**Author:** ![Quik](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/quik/32/5979_2.png) [@Quik](https://forums.speedlife.net/u/Quik)\ **Post date:** [October 22, 2006, 5:47pm UTC](https://forums.speedlife.net/t/project-intimidator-408/185767/2 "2006-10-22T17:47:58Z")
second up is a set of L92 heads. they flow the best of any stock production truck head avaible. something like 335 on the intake side. 2.16 and 1.6 valves i do believe they are stock on the new 6.2 esclades and will work well with the new 408 ---
**Author:** ![Quik](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/quik/32/5979_2.png) [@Quik](https://forums.speedlife.net/u/Quik)\ **Post date:** [October 22, 2006, 5:50pm UTC](https://forums.speedlife.net/t/project-intimidator-408/185767/3 "2006-10-22T17:50:37Z")
now heres the fully forged Lunati 408 cam specs are 244/248 .612/.615 112+2 lsa and some LS7 lifters once again ---
**Author:** ![Quik](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/quik/32/5979_2.png) [@Quik](https://forums.speedlife.net/u/Quik)\ **Post date:** [October 22, 2006, 5:51pm UTC](https://forums.speedlife.net/t/project-intimidator-408/185767/4 "2006-10-22T17:51:28Z")
theres alot more to be had to put this in but hopefully by spring it will be finished and up and running. ---
**Author:** ![Converted2LSX](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/converted2lsx/32/5962_2.png) [@Converted2LSX](https://forums.speedlife.net/u/Converted2LSX)\ **Post date:** [October 22, 2006, 6:17pm UTC](https://forums.speedlife.net/t/project-intimidator-408/185767/5 "2006-10-22T18:17:51Z")
intimidator :kekegay: ---
**Author:** ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)\ **Post date:** [October 22, 2006, 6:25pm UTC](https://forums.speedlife.net/t/project-intimidator-408/185767/6 "2006-10-22T18:25:09Z")
wow,i would hit that like a wall!😃 ---
**Author:** ![T70\_Tsi](https://avatars.discourse-cdn.com/v4/letter/t/898d66/32.png) [@T70\_Tsi](https://forums.speedlife.net/u/T70_Tsi)\ **Post date:** [October 22, 2006, 6:31pm UTC](https://forums.speedlife.net/t/project-intimidator-408/185767/7 "2006-10-22T18:31:01Z")
did you rob someone? ---
**Author:** ![Dominator](https://avatars.discourse-cdn.com/v4/letter/d/a4c791/32.png) [@Dominator](https://forums.speedlife.net/u/Dominator)\ **Post date:** [October 22, 2006, 6:45pm UTC](https://forums.speedlife.net/t/project-intimidator-408/185767/8 "2006-10-22T18:45:20Z")
weren’t you the one trying to tell me that lsx heads are soooooo different that they flow better with alot smaller valves? If you don’t sound too stupid in your posted retort there will be a domination sticker on you truck for prepin your heads. Act like a hard ass and I’m not doing them sucka! ---
**Author:** ![Quik](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/quik/32/5979_2.png) [@Quik](https://forums.speedlife.net/u/Quik)\ **Post date:** [October 22, 2006, 6:56pm UTC](https://forums.speedlife.net/t/project-intimidator-408/185767/9 "2006-10-22T18:56:33Z")
> [@Went out for a bag of milk and came back with...](https://forums.speedlife.net/t/went-out-for-a-bag-of-milk-and-came-back-with/24358/186): > > weren’t you the one trying to tell me that lsx heads are soooooo different that they flow better with alot smaller valves? If you don’t sound too stupid in your posted retort there will be a domination sticker on you truck for prepin your heads. Act like a hard ass and I’m not doing them sucka! yes i did say LSX…standard cubed motors. but these are based of a Gen IV motor. these heads dont like the typical cams most LS series use either. they like more overlap in between duration unlike typical LS cams around -+ 10 where these like 20 -+ or more in split ---
**Author:** ![Quik](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/quik/32/5979_2.png) [@Quik](https://forums.speedlife.net/u/Quik)\ **Post date:** [October 22, 2006, 6:57pm UTC](https://forums.speedlife.net/t/project-intimidator-408/185767/10 "2006-10-22T18:57:12Z")
> [@Super hot 16yr old in teh shower..](https://forums.speedlife.net/t/super-hot-16yr-old-in-teh-shower/25271/7): > > did you rob someone? no sir, just working off things and paying for things allows to buy and recieve new goodies ---
**Author:** ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)\ **Post date:** [October 23, 2006, 4:51am UTC](https://forums.speedlife.net/t/project-intimidator-408/185767/11 "2006-10-23T04:51:27Z")
yes i was robbed! ---
**Author:** ![Turbo\_Silverado](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/turbo_silverado/32/5990_2.png) [@Turbo\_Silverado](https://forums.speedlife.net/u/Turbo_Silverado)\ **Post date:** [October 23, 2006, 4:52am UTC](https://forums.speedlife.net/t/project-intimidator-408/185767/12 "2006-10-23T04:52:14Z")
its going to be bad ass ---
**Author:** ![imported\_SINISTER](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/imported_sinister/32/5970_2.png) [@imported\_SINISTER](https://forums.speedlife.net/u/imported_SINISTER)\ **Post date:** [October 23, 2006, 4:57am UTC](https://forums.speedlife.net/t/project-intimidator-408/185767/13 "2006-10-23T04:57:48Z")
sweet~~~ do those heads match the ports on the intake manifold?? and do they accept the same style head gasket as the 6.0’s?? or differnt if so is it a mls gasket? ---
**Author:** ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)\ **Post date:** [October 23, 2006, 5:05am UTC](https://forums.speedlife.net/t/project-intimidator-408/185767/14 "2006-10-23T05:05:48Z")
> [@Super hot 16yr old in teh shower..](https://forums.speedlife.net/t/super-hot-16yr-old-in-teh-shower/25271/11): > > sweet~~~ > > do those heads match the ports on the intake manifold?? > > and do they accept the same style head gasket as the 6.0’s?? or differnt if so is it a mls gasket? yes & i think yes! they would be killer on ur car! ---
**Author:** ![Quik](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/quik/32/5979_2.png) [@Quik](https://forums.speedlife.net/u/Quik)\ **Post date:** [October 23, 2006, 1:09pm UTC](https://forums.speedlife.net/t/project-intimidator-408/185767/15 "2006-10-23T13:09:21Z")
i do believe they accept stock style headgaskets ill probably be using cosmetic since i want high CR so i might end up with a .030 gasket or so depending on PTV that intake is one of 2 avaible at the moment. the other one is the truck intake which i dont want cause of looks and the lack of topend…soon they will have a carb’d style avalible ---
**Author:** ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)\ **Post date:** [October 23, 2006, 1:21pm UTC](https://forums.speedlife.net/t/project-intimidator-408/185767/16 "2006-10-23T13:21:50Z")
> [@NYSPEED UPGRADE COMMENTS, PROBLEMS AND SUGGESTIONS POST HERE ONLY!!!!](https://forums.speedlife.net/t/nyspeed-upgrade-comments-problems-and-suggestions-post-here-only/24454/171): > > that intake is one of 2 avaible at the moment. 😕 we just got 4 more in & there sold aready! ---
**Author:** ![Quik](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/quik/32/5979_2.png) [@Quik](https://forums.speedlife.net/u/Quik)\ **Post date:** [October 23, 2006, 1:30pm UTC](https://forums.speedlife.net/t/project-intimidator-408/185767/17 "2006-10-23T13:30:10Z")
> [@Chevrolet Monte Carlo production to end](https://forums.speedlife.net/t/chevrolet-monte-carlo-production-to-end/25275/27): > > 😕 we just got 4 more in > > & there sold aready! no no not the number of you have but style/type avaible from GM to work with these heads ---
**Author:** ![Turbo\_Silverado](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/turbo_silverado/32/5990_2.png) [@Turbo\_Silverado](https://forums.speedlife.net/u/Turbo_Silverado)\ **Post date:** [October 23, 2006, 1:33pm UTC](https://forums.speedlife.net/t/project-intimidator-408/185767/18 "2006-10-23T13:33:07Z")
> [@WTH: Computer Sales Floor Manager](https://forums.speedlife.net/t/wth-computer-sales-floor-manager/25233/11): > > no no not the number of you have but style/type avaible from GM to work with these heads whats the ohter one that works with those heads? ---
**Author:** ![Quik](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/quik/32/5979_2.png) [@Quik](https://forums.speedlife.net/u/Quik)\ **Post date:** [October 23, 2006, 1:35pm UTC](https://forums.speedlife.net/t/project-intimidator-408/185767/19 "2006-10-23T13:35:13Z")
> [@Newman's 1986 BMW 326rb build thread.](https://forums.speedlife.net/t/newmans-1986-bmw-326rb-build-thread/22123/701): > > whats the ohter one that works with those heads? truck intake!!! like i said i didnt want to use that oen cause of the lack of topend/looks ---
**Author:** ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)\ **Post date:** [October 23, 2006, 1:47pm UTC](https://forums.speedlife.net/t/project-intimidator-408/185767/20 "2006-10-23T13:47:56Z")
o i c [Next page](https://forums.speedlife.net/t/project-intimidator-408/185767.md?page=2)