# Project K20 Sedan
**URL:** https://forums.speedlife.net/t/project-k20-sedan/234914
**Category:** Builds
**Created:** [October 4, 2007, 6:09pm UTC](https://forums.speedlife.net/t/project-k20-sedan/234914 "2007-10-04T18:09:02Z")
**Posts on this page:** 20
**Page:** 7
### Author:  [@K20power](https://forums.speedlife.net/u/K20power)
#### Post date: [January 2, 2008, 2:50pm UTC](https://forums.speedlife.net/t/project-k20-sedan/234914/121 "2008-01-02T14:50:04Z")
> [@stuffnthings](#):
>
> In for review of AEM EMS once your hooked up! Everything i’ve been reading has been biased to k-pro… Whatd you pick up the RBC IM for? Supposedly CRSX is going to offer pre-modified ones soon. Can’t wait to see all this come together.
I got the RBC as a gift, but i know it was bought new from Honda. And yeah, same with me everything i read was biased to K-Pro, so i made a thread on [K20a.org](http://K20a.org) and asked for input on the AEM EMS and what’s different compared to K-Pro and a few vendors and people who build k swaps chimed in and said (some quotes)
> like i mentioned, aem is for the very advanced race team. K-pro is more user friendly for those “daily driven” - k20addict([k20a.org](http://k20a.org) sponsor)
> I like my aem, and i liked my kpro. But for a dd id rather have kpro. With aem you can control everything. With aem it takes a few to get used to the software, but once you do, you have so much control on how your car acts. - vtecspeed1320(senior member)
> you can use either for a daily driver. aem is a lil bit more complicated and goes a lil more in depth, while kpro is simpler to use but still can get the job done for everyone from a basic street setup to an all out race car… - JDM96SpecCTR(senior member)
So i came to the conclusion that the AEM EMS seems to be a lot better, but takes a little to get used to…It even has electronic traction control! :lol …Oh and another thing, for our motors (05-06 rsx-s) we need the 02-04 wiring harness.
---
### Author:  [@stuffnthings](https://forums.speedlife.net/u/stuffnthings)
#### Post date: [January 2, 2008, 4:53pm UTC](https://forums.speedlife.net/t/project-k20-sedan/234914/122 "2008-01-02T16:53:31Z")
Traction… :crackup! Im suprised i havnt read of any k24 talk yet.
---
### Author:  [@K20power](https://forums.speedlife.net/u/K20power)
#### Post date: [January 2, 2008, 5:28pm UTC](https://forums.speedlife.net/t/project-k20-sedan/234914/123 "2008-01-02T17:28:19Z")
> [@stuffnthings](#):
>
> Traction… :crackup! Im suprised i havnt read of any k24 talk yet.
Well, you see…plans changed, I decided not to do the k24 frankinstein build :sad I’m just going to stay with the k20 and continue modding it :nod
---
### Author:  [@tdi\_logik](https://forums.speedlife.net/u/tdi_logik)
#### Post date: [January 2, 2008, 5:51pm UTC](https://forums.speedlife.net/t/project-k20-sedan/234914/124 "2008-01-02T17:51:47Z")
is it gonna blow heavy black smoke? :banana
if not i’m not interested :🙂
j/k bro, i want a ride in this once its finished.
---
### Author:  [@K20power](https://forums.speedlife.net/u/K20power)
#### Post date: [January 2, 2008, 5:54pm UTC](https://forums.speedlife.net/t/project-k20-sedan/234914/125 "2008-01-02T17:54:59Z")
No, no black smoke, that’s what your new car is for :lol
Your more than welcome to come for a ride, i want a ride in the… :ninja golf :ninja ;D
---
### Author:  [@tdi\_logik](https://forums.speedlife.net/u/tdi_logik)
#### Post date: [January 2, 2008, 6:05pm UTC](https://forums.speedlife.net/t/project-k20-sedan/234914/126 "2008-01-02T18:05:13Z")
wait, what golf???
shhhhhhh :sleep
---
### Author:  [@K20power](https://forums.speedlife.net/u/K20power)
#### Post date: [January 14, 2008, 6:52am UTC](https://forums.speedlife.net/t/project-k20-sedan/234914/127 "2008-01-14T06:52:10Z")
Few updates to the mod list … ;D
[[550cc injectors]]
[[Hondata RBC adapter plate]]
---
### Author:  [@Vovchandr](https://forums.speedlife.net/u/Vovchandr)
#### Post date: [January 14, 2008, 9:35am UTC](https://forums.speedlife.net/t/project-k20-sedan/234914/128 "2008-01-14T09:35:19Z")
There ya go.
Pics or ban lol
---
### Author:  [@K20power](https://forums.speedlife.net/u/K20power)
#### Post date: [January 14, 2008, 9:43am UTC](https://forums.speedlife.net/t/project-k20-sedan/234914/129 "2008-01-14T09:43:34Z")
I’ll have pics, im pretty busy in the next 24-48 hours working…but they will be up :nod
---
### Author:  [@Code\_Blue](https://forums.speedlife.net/u/Code_Blue)
#### Post date: [January 16, 2008, 3:37am UTC](https://forums.speedlife.net/t/project-k20-sedan/234914/130 "2008-01-16T03:37:23Z")
> [@K-20power](#):
>
> > [@Junun](#):
> >
> > awesome project, things going to be a beast. was there any damage to the k20 when you got it? that reck looked bad.
>
> no damage to the k20, i finished the project in early september, now the winter parts are beginning to be ordered… 300ishwhp on all motor is looking pretty good ;D…boosting will come in '08
what are you planning on doing to get it 300 whp all motor?
---
### Author:  [@K20power](https://forums.speedlife.net/u/K20power)
#### Post date: [January 16, 2008, 6:07am UTC](https://forums.speedlife.net/t/project-k20-sedan/234914/131 "2008-01-16T06:07:13Z")
I was waiting for someone to flame on my previous plans…I was originally planning on the K24 bottom end w/ the K20 head, and you can most certainly make 300whp all motor with that, but i decided against doing that…but once i get cams, pistons, rods, exhaust cut-out…i’ll put down atleast 300whp on the k20 (no k24 bottom end)
---
### Author:  [@91teg](https://forums.speedlife.net/u/91teg)
#### Post date: [January 16, 2008, 6:20am UTC](https://forums.speedlife.net/t/project-k20-sedan/234914/132 "2008-01-16T06:20:50Z")
Sounds like theres goin to be alot of nice cars this summer :nod
---
### Author:  [@Code\_Blue](https://forums.speedlife.net/u/Code_Blue)
#### Post date: [January 16, 2008, 1:23pm UTC](https://forums.speedlife.net/t/project-k20-sedan/234914/133 "2008-01-16T13:23:52Z")
why not just wait and then build it up for boost, if thats what your plans are later on in the year…
it doesn’t make sense to take one step forwards, then backtrack.
---
### Author:  [@K20power](https://forums.speedlife.net/u/K20power)
#### Post date: [January 16, 2008, 5:02pm UTC](https://forums.speedlife.net/t/project-k20-sedan/234914/134 "2008-01-16T17:02:46Z")
I could throw on a gt3076r and make 500hp without even cracking the motor open, and it being reliable… as i was told by Mike from Synapse.
I just don’t want to turbo it yet, i want to get forged pistons, rods, sleeves, cams…then turbo it.
---
### Author:  [@tdi\_logik](https://forums.speedlife.net/u/tdi_logik)
#### Post date: [January 16, 2008, 5:04pm UTC](https://forums.speedlife.net/t/project-k20-sedan/234914/135 "2008-01-16T17:04:29Z")
get the turbo. save your monies.
---
### Author:  [@K20power](https://forums.speedlife.net/u/K20power)
#### Post date: [January 16, 2008, 5:05pm UTC](https://forums.speedlife.net/t/project-k20-sedan/234914/136 "2008-01-16T17:05:47Z")
Nah, im good…i want a built motor before i turbo it…or supercharge ;D :mwahaha
---
### Author:  [@tdi\_logik](https://forums.speedlife.net/u/tdi_logik)
#### Post date: [January 16, 2008, 5:19pm UTC](https://forums.speedlife.net/t/project-k20-sedan/234914/137 "2008-01-16T17:19:28Z")
TuRbO son
---
### Author:  [@tdi\_logik](https://forums.speedlife.net/u/tdi_logik)
#### Post date: [January 16, 2008, 5:20pm UTC](https://forums.speedlife.net/t/project-k20-sedan/234914/138 "2008-01-16T17:20:10Z")
oh, i was gonna up load that 540i video… if you still want me to.
---
### Author:  [@K20power](https://forums.speedlife.net/u/K20power)
#### Post date: [January 16, 2008, 5:33pm UTC](https://forums.speedlife.net/t/project-k20-sedan/234914/139 "2008-01-16T17:33:50Z")
Yeah please do, i’d love to see it…only vid i have of my car …UPLOAD ASAP!!!
---
### Author:  [@91teg](https://forums.speedlife.net/u/91teg)
#### Post date: [January 16, 2008, 7:52pm UTC](https://forums.speedlife.net/t/project-k20-sedan/234914/140 "2008-01-16T19:52:28Z")
Id like to see that
[Previous page](https://forums.speedlife.net/t/project-k20-sedan/234914.md?page=6)
[Next page](https://forums.speedlife.net/t/project-k20-sedan/234914.md?page=8)