# Project Quest...4/26
**URL:** https://forums.speedlife.net/t/project-quest-4-26/36028
**Category:** Builds
**Created:** [September 26, 2007, 8:22pm UTC](https://forums.speedlife.net/t/project-quest-4-26/36028 "2007-09-26T20:22:27Z")
**Posts on this page:** 19
**Page:** 3
### Author:  [@psychopjv](https://forums.speedlife.net/u/psychopjv)
#### Post date: [April 6, 2008, 12:56am UTC](https://forums.speedlife.net/t/project-quest-4-26/36028/41 "2008-04-06T00:56:37Z")
Good job brent keep up the good work.
---
### Author:  [@reliant\_turbo](https://forums.speedlife.net/u/reliant_turbo)
#### Post date: [April 6, 2008, 11:25am UTC](https://forums.speedlife.net/t/project-quest-4-26/36028/42 "2008-04-06T11:25:47Z")
looks great!
non-jet valve head?
what engine management?
Brian
---
### Author:  [@Coldaccord](https://forums.speedlife.net/u/Coldaccord)
#### Post date: [April 6, 2008, 7:26pm UTC](https://forums.speedlife.net/t/project-quest-4-26/36028/43 "2008-04-06T19:26:27Z")
whats the comp ratio now?
---
### Author:  [@AngryHero](https://forums.speedlife.net/u/AngryHero)
#### Post date: [April 6, 2008, 8:00pm UTC](https://forums.speedlife.net/t/project-quest-4-26/36028/44 "2008-04-06T20:00:58Z")
> [@reliant\_turbo](#):
>
> looks great!
>
> non-jet valve head?
>
> what engine management?
>
> Brian
Yeah NJV.This head flows the most and has the least amount of problems.It also has a 3 angle valve job and it ported an polished.Everything in the head is brand new.I switched from hydrolic lifters to mechanical so i could have this big cam in it.
Stock
INT & EXH Duration 264° Seat-To-Seat (Advertised)
INT & EXH Lift .406”-.413”
Lobe Center Separation 109°
Intake lobe is degreed to 107°
Screamin’Banshee:
INT: 292° Seat-To-Seat .454 Lift
EXH: 280° Seat-To-Seat .454 Lift
Lobe Center Separation 111.5°
Power Range 2800 - 6500 +RPM
Intake Lobe Center 107°
They only make 1 bigger cam for this car and it dosent really have any proven results.I havent really heard anything good about it so i went with the one above
The engine managment came with the intake.Its pretty much their own version of megasquirt
> [@Coldaccord](#):
>
> whats the comp ratio now?
The weisco pistons are 8:1
---
### Author:  [@JDMSIR](https://forums.speedlife.net/u/JDMSIR)
#### Post date: [April 6, 2008, 8:06pm UTC](https://forums.speedlife.net/t/project-quest-4-26/36028/45 "2008-04-06T20:06:03Z")
Fucking sweet build, I love the red VC and Blue engine bay. Looks sick.That old intake looked like a shitty setup, looks so much better with MPFI.
---
### Author:  [@reliant\_turbo](https://forums.speedlife.net/u/reliant_turbo)
#### Post date: [April 7, 2008, 8:10pm UTC](https://forums.speedlife.net/t/project-quest-4-26/36028/46 "2008-04-07T20:10:12Z")
cool! have fun. 🙂
Brian
---
### Author:  [@Slopoke](https://forums.speedlife.net/u/Slopoke)
#### Post date: [April 8, 2008, 1:20pm UTC](https://forums.speedlife.net/t/project-quest-4-26/36028/47 "2008-04-08T13:20:48Z")
Cant wait to hear what kinda #'s this thing put down, hope everything works out as planned :tup:
---
### Author:  [@maverick27](https://forums.speedlife.net/u/maverick27)
#### Post date: [April 8, 2008, 3:10pm UTC](https://forums.speedlife.net/t/project-quest-4-26/36028/48 "2008-04-08T15:10:34Z")
what do these cars run stock?
looks nice so far!
---
### Author:  [@Slopoke](https://forums.speedlife.net/u/Slopoke)
#### Post date: [April 8, 2008, 5:12pm UTC](https://forums.speedlife.net/t/project-quest-4-26/36028/49 "2008-04-08T17:12:05Z")
mid 15’s. Boost controller/dp/dr’s you can run 13’s…Just like any other dsm 🤣
---
### Author:  [@choko](https://forums.speedlife.net/u/choko)
#### Post date: [April 8, 2008, 5:48pm UTC](https://forums.speedlife.net/t/project-quest-4-26/36028/50 "2008-04-08T17:48:30Z")
Brent looks good! Make me miss my conquest some lol
---
### Author:  [@AngryHero](https://forums.speedlife.net/u/AngryHero)
#### Post date: [April 26, 2008, 6:57pm UTC](https://forums.speedlife.net/t/project-quest-4-26/36028/51 "2008-04-26T18:57:00Z")
Alright so it was time to modify the old exhaust.The header makes the turbo sit farther back.I needed to have a 90 from the turbo so it wouldnt hit my firewall.I went to muffelerman and had them cut a prebent 90 and put a vband flare on it.Excuse my welding.This was my first time and i probably will use heat wrap anyway.
I then cut off the stock flange and some pipe.What you have below is about a 65\* angle.
My friend brought over his shit so i could make it happen.
We cut the piece at 12 1/2\* so it would make a 90.Protracters are your friend.
It turned out pretty decent.
I put in a flex pipe and a 3 bolt flange for removal purposes.I still needed a little more to reach the prebent 90.I just used a coupling for that.
Heres how it sits now.It fits real nice.Im going to run my dumptube later
Underneath the car.I still need a gasket for it.theres a bung on the otherside for my AEM wideband.I welded the nuts in place
The exhaust was only about 3" from the ground before.Now it actually looks right.Nice and tight to the car.
I went to home depot and after some searching around i found these brackets.I figured something like this would be perfect for mounting.I used the stock bolt holes and it seems to be pretty solid.1 underneath 2 on the top.I have some reducing couplers on the way.I mocked up the piping for now.Hopefully thats tomorrow.
---
### Author:  [@RedConquestTSi](https://forums.speedlife.net/u/RedConquestTSi)
#### Post date: [April 29, 2008, 3:22pm UTC](https://forums.speedlife.net/t/project-quest-4-26/36028/52 "2008-04-29T15:22:57Z")
Mmmmm…I hate these cars…no srsly. :lol:
---
### Author:  [@psychopjv](https://forums.speedlife.net/u/psychopjv)
#### Post date: [April 30, 2008, 12:43am UTC](https://forums.speedlife.net/t/project-quest-4-26/36028/53 "2008-04-30T00:43:20Z")
> [@RedConquestTSi](#):
>
> Mmmmm…I hate these cars…no srsly. :lol:
just finish yours already.
---
### Author:  [@RedConquestTSi](https://forums.speedlife.net/u/RedConquestTSi)
#### Post date: [April 30, 2008, 6:38pm UTC](https://forums.speedlife.net/t/project-quest-4-26/36028/54 "2008-04-30T18:38:57Z")
Hey…it runs! What more do you want?
---
### Author:  [@KuntryQuestTSi](https://forums.speedlife.net/u/KuntryQuestTSi)
#### Post date: [April 30, 2008, 7:21pm UTC](https://forums.speedlife.net/t/project-quest-4-26/36028/55 "2008-04-30T19:21:04Z")
for you to get more than 1200 miles out of one motor…
4 last summer?
---
### Author:  [@RedConquestTSi](https://forums.speedlife.net/u/RedConquestTSi)
#### Post date: [April 30, 2008, 8:44pm UTC](https://forums.speedlife.net/t/project-quest-4-26/36028/56 "2008-04-30T20:44:46Z")
Hey, that engine last summer got like 12,000 before I blew it apart. Gimme a break…these things are touchy. Props to Brent for going MPI. I have wetdreams bout his setup…
---
### Author:  [@TurdBlown\_Teg](https://forums.speedlife.net/u/TurdBlown_Teg)
#### Post date: [July 11, 2008, 4:57am UTC](https://forums.speedlife.net/t/project-quest-4-26/36028/57 "2008-07-11T04:57:24Z")
updates?
---
### Author:  [@Choda](https://forums.speedlife.net/u/Choda)
#### Post date: [July 11, 2008, 5:27am UTC](https://forums.speedlife.net/t/project-quest-4-26/36028/58 "2008-07-11T05:27:39Z")
:tup:
---
### Author:  [@RedConquestTSi](https://forums.speedlife.net/u/RedConquestTSi)
#### Post date: [August 10, 2008, 5:23pm UTC](https://forums.speedlife.net/t/project-quest-4-26/36028/59 "2008-08-10T17:23:51Z")
:tup: Where is this now?
[Previous page](https://forums.speedlife.net/t/project-quest-4-26/36028.md?page=2)