# Project Quest...4/26

**URL:** https://forums.speedlife.net/t/project-quest-4-26/36028
**Category:** Builds
**Created:** [September 26, 2007, 8:22pm UTC](https://forums.speedlife.net/t/project-quest-4-26/36028 "2007-09-26T20:22:27Z")
**Posts on this page:** 1
**Showing post:** 51

<div class="post-metadata">

### Author: ![AngryHero](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/angryhero/32/7495_2.png) [@AngryHero](https://forums.speedlife.net/u/AngryHero)
#### Post date: [April 26, 2008, 6:57pm UTC](https://forums.speedlife.net/t/project-quest-4-26/36028/51 "2008-04-26T18:57:00Z")

</div>

Alright so it was time to modify the old exhaust.The header makes the turbo sit farther back.I needed to have a 90 from the turbo so it wouldnt hit my firewall.I went to muffelerman and had them cut a prebent 90 and put a vband flare on it.Excuse my welding.This was my first time and i probably will use heat wrap anyway.

I then cut off the stock flange and some pipe.What you have below is about a 65\* angle.

 ![http://i5.photobucket.com/albums/y170/angryhero46/img_1434.jpg](http://i5.photobucket.com/albums/y170/angryhero46/img_1434.jpg)

My friend brought over his shit so i could make it happen.  
We cut the piece at 12 1/2\* so it would make a 90.Protracters are your friend.

 ![http://i5.photobucket.com/albums/y170/angryhero46/img_1436.jpg](http://i5.photobucket.com/albums/y170/angryhero46/img_1436.jpg)

It turned out pretty decent.

I put in a flex pipe and a 3 bolt flange for removal purposes.I still needed a little more to reach the prebent 90.I just used a coupling for that.

 ![http://i5.photobucket.com/albums/y170/angryhero46/img_1437.jpg](http://i5.photobucket.com/albums/y170/angryhero46/img_1437.jpg)

Heres how it sits now.It fits real nice.Im going to run my dumptube later

 ![http://i5.photobucket.com/albums/y170/angryhero46/img_1438.jpg](http://i5.photobucket.com/albums/y170/angryhero46/img_1438.jpg)

Underneath the car.I still need a gasket for it.theres a bung on the otherside for my AEM wideband.I welded the nuts in place

 ![http://i5.photobucket.com/albums/y170/angryhero46/img_1439.jpg](http://i5.photobucket.com/albums/y170/angryhero46/img_1439.jpg)

The exhaust was only about 3" from the ground before.Now it actually looks right.Nice and tight to the car.

 ![http://i5.photobucket.com/albums/y170/angryhero46/img_1440.jpg](http://i5.photobucket.com/albums/y170/angryhero46/img_1440.jpg)

I went to home depot and after some searching around i found these brackets.I figured something like this would be perfect for mounting.I used the stock bolt holes and it seems to be pretty solid.1 underneath 2 on the top.I have some reducing couplers on the way.I mocked up the piping for now.Hopefully thats tomorrow.

 ![http://i5.photobucket.com/albums/y170/angryhero46/img_1441.jpg](http://i5.photobucket.com/albums/y170/angryhero46/img_1441.jpg)

---

_[View the full topic](https://forums.speedlife.net/t/project-quest-4-26/36028)._