# Project "Why the fuck did I buy another DSM?"
**URL:** https://forums.speedlife.net/t/project-why-the-fuck-did-i-buy-another-dsm/200126
**Category:** Builds
**Created:** [October 13, 2008, 12:14pm UTC](https://forums.speedlife.net/t/project-why-the-fuck-did-i-buy-another-dsm/200126 "2008-10-13T12:14:41Z")
**Posts on this page:** 20
**Page:** 1
### Author:  [@T34418L31](https://forums.speedlife.net/u/T34418L31)
#### Post date: [October 13, 2008, 12:14pm UTC](https://forums.speedlife.net/t/project-why-the-fuck-did-i-buy-another-dsm/200126/1 "2008-10-13T12:14:41Z")
Can’t complain, though. Aside from the torque and the sound, I like this better in every way over the LS1 Miata.
But, here’s what I’ve been tinkering with recently. Daily driver, by the way.
1997 GSX, bought with 92k on the clock.
Engine -
2.3l 6-bolt punched .040 over
Wiseco 8.8:1 on Eagles
ARP rod bolts
ARP head studs
Mitsu MLS head gasket
ported 2G head
Ferrea valves
Manley springs and retainers
HKS 272’s
ported oil filter relief valve
balance shafts gone
Intake -
Kinetic FMIC
HKS SSQV BOV
64mm throttle body (Hal Landry special)
FP 4" cast intake pipe/K&N
phelonic intake spacer
Venom SMIM
Fuel -
FIC 880cc injectors
Walbro 255HP
-6an lines from filter to rail, and rail to Aeromotive AFPR
Exhaust -
Blown GT30R (ate a brass fitting)
3.25" RSR exhaust
3" O2 housing
Suspension/brakes -
Tokico Illumina adjustables
Eibach prokit
Wilwood ultralite calipers
Wilwood 13" rotors
Wilwood poly matrix pads
SS lines
Drivetrain -
smooth shifting transmission (go figure!)
shifter bushings
ACT 2600
XACT flywheel
SS clutch line
Misc -
Boost controller thanks to turbob16
Home made COP
Permacool power steering cooler
PLX M300 wideband
Boost and EGT gauges
Apex turbo timer
DSMLink
European market taillights and mirrors
Audio -
Kenwood deck, USB input (best thing I’ve ever bought for a car)
Infinity Kappa 6x9 rear
Factory Infinity front
Kicker amp
Memphis 10" sub
* * *
I have a ForcedPerformance 3065 sitting at the house waiting to go on, and the remainder of the stuff (v-band clamps, etc) have been ordered. Hoping to get it on this week, tuned, and ready for the next TNT 😃
Also, the bumper still needs trimmed better - it’s not done, I just haven’t had time to sit and trim it perfect.
        
---
### Author:  [@69camaro](https://forums.speedlife.net/u/69camaro)
#### Post date: [October 13, 2008, 12:19pm UTC](https://forums.speedlife.net/t/project-why-the-fuck-did-i-buy-another-dsm/200126/2 "2008-10-13T12:19:56Z")
do you still have the miata?
---
### Author:  [@T34418L31](https://forums.speedlife.net/u/T34418L31)
#### Post date: [October 13, 2008, 12:24pm UTC](https://forums.speedlife.net/t/project-why-the-fuck-did-i-buy-another-dsm/200126/3 "2008-10-13T12:24:00Z")
No, sold it.
---
### Author:  [@69camaro](https://forums.speedlife.net/u/69camaro)
#### Post date: [October 13, 2008, 12:39pm UTC](https://forums.speedlife.net/t/project-why-the-fuck-did-i-buy-another-dsm/200126/4 "2008-10-13T12:39:12Z")
that sucks. nice eclipse though
---
### Author:  [@starboy](https://forums.speedlife.net/u/starboy)
#### Post date: [October 13, 2008, 12:39pm UTC](https://forums.speedlife.net/t/project-why-the-fuck-did-i-buy-another-dsm/200126/5 "2008-10-13T12:39:43Z")
Very clean dsm for sure, good luck with the project Jesse
---
### Author:  [@SmokinDiesel](https://forums.speedlife.net/u/SmokinDiesel)
#### Post date: [October 13, 2008, 1:02pm UTC](https://forums.speedlife.net/t/project-why-the-fuck-did-i-buy-another-dsm/200126/6 "2008-10-13T13:02:26Z")
Looks pretty nice … Good luck
---
### Author:  [@DTMVENG24](https://forums.speedlife.net/u/DTMVENG24)
#### Post date: [October 13, 2008, 1:03pm UTC](https://forums.speedlife.net/t/project-why-the-fuck-did-i-buy-another-dsm/200126/7 "2008-10-13T13:03:49Z")
Nice. Looks like it has a lil bit of everything. Nice brakes,motor,decent miles etc. Good find!
---
### Author:  [@ZEX350Z](https://forums.speedlife.net/u/ZEX350Z)
#### Post date: [October 13, 2008, 1:14pm UTC](https://forums.speedlife.net/t/project-why-the-fuck-did-i-buy-another-dsm/200126/8 "2008-10-13T13:14:26Z")
Always my favorite body style of the mitsu’s. Not a huge fan of the color - but I drive an orange car so what can I say …ha!
Car looks good!
---
### Author:  [@beat90tsi](https://forums.speedlife.net/u/beat90tsi)
#### Post date: [October 13, 2008, 1:19pm UTC](https://forums.speedlife.net/t/project-why-the-fuck-did-i-buy-another-dsm/200126/9 "2008-10-13T13:19:24Z")
Haha, I know the feeling. Not my favorite color either, but I weigh other considerations over the color of the car as well, so I don’t blame you.
Those wheels are really easy to paint with the lip a different color/polished, I guess the PO chose not to do that, and they look good the way they are done.
Have fun man, looks like a clean car and those GSX wheels in my opinion are the best looking stock wheels ever offered on a DSM.
---
### Author:  [@stinkbox](https://forums.speedlife.net/u/stinkbox)
#### Post date: [October 13, 2008, 1:21pm UTC](https://forums.speedlife.net/t/project-why-the-fuck-did-i-buy-another-dsm/200126/10 "2008-10-13T13:21:39Z")
Nice! Looks good. decent mods too.
---
### Author:  [@T34418L31](https://forums.speedlife.net/u/T34418L31)
#### Post date: [October 13, 2008, 1:27pm UTC](https://forums.speedlife.net/t/project-why-the-fuck-did-i-buy-another-dsm/200126/11 "2008-10-13T13:27:06Z")
Just wanted to clarify a few things -
car really isn’t a project. Unless something explodes, I’m not touching anything else. I’m too old for this :bigok:
I like the color, actually. I decided I wanted this, black, or white. This was the color I found (Wash, DC area.) DSM was bought because everything else I was looking at was 15k+ and I didn’t want payments.
I painted the wheels. PO painted them black, and they were chipped really badly. Long story short, my paint job was just a very quick spray, I didn’t put much effort into it due to time, but I might end up painting them “right” later.
Hoping to click off at least 120mph traps on pump.
Car still has PS, and ice cold AC :eek4: It took some finesse to get it to quit overheating with the FMIC on, but I got it set up really nice.
---
### Author:  [@pghdsm](https://forums.speedlife.net/u/pghdsm)
#### Post date: [October 13, 2008, 1:31pm UTC](https://forums.speedlife.net/t/project-why-the-fuck-did-i-buy-another-dsm/200126/12 "2008-10-13T13:31:54Z")
Me like. Good find Jess.
---
### Author:  [@turbob16](https://forums.speedlife.net/u/turbob16)
#### Post date: [October 13, 2008, 2:27pm UTC](https://forums.speedlife.net/t/project-why-the-fuck-did-i-buy-another-dsm/200126/13 "2008-10-13T14:27:10Z")
baller dsm, remember you still owe me a ride before you sell it, so ill make sure im around within the next month waiting for the call.
---
### Author:  [@Lazylaser](https://forums.speedlife.net/u/Lazylaser)
#### Post date: [October 20, 2008, 3:39pm UTC](https://forums.speedlife.net/t/project-why-the-fuck-did-i-buy-another-dsm/200126/14 "2008-10-20T15:39:21Z")
Good, any chance you’ll be taking this d.d. to prp?
---
### Author:  [@SoLow](https://forums.speedlife.net/u/SoLow)
#### Post date: [October 20, 2008, 3:47pm UTC](https://forums.speedlife.net/t/project-why-the-fuck-did-i-buy-another-dsm/200126/15 "2008-10-20T15:47:45Z")
ehhh…not bad jesse
---
### Author:  [@T34418L31](https://forums.speedlife.net/u/T34418L31)
#### Post date: [October 20, 2008, 6:53pm UTC](https://forums.speedlife.net/t/project-why-the-fuck-did-i-buy-another-dsm/200126/16 "2008-10-20T18:53:22Z")
Hoping to go this weekend. Waiting for a v-band clamp/outlet flange to weld up for a downpipe to get the 3065 on.
---
### Author:  [@SoLow](https://forums.speedlife.net/u/SoLow)
#### Post date: [October 21, 2008, 6:37am UTC](https://forums.speedlife.net/t/project-why-the-fuck-did-i-buy-another-dsm/200126/17 "2008-10-21T06:37:06Z")
cool…good luck buddy…but i still think the miata\> this 🙂
---
### Author:  [@spoolinsteve](https://forums.speedlife.net/u/spoolinsteve)
#### Post date: [October 21, 2008, 8:00am UTC](https://forums.speedlife.net/t/project-why-the-fuck-did-i-buy-another-dsm/200126/18 "2008-10-21T08:00:55Z")
cough never will be at tnt cough! I dont know what to say you already know I like the car and its ecu ground circuit
(give me your 3065)
---
### Author:  [@BigMack\_Srt8](https://forums.speedlife.net/u/BigMack_Srt8)
#### Post date: [October 22, 2008, 10:38pm UTC](https://forums.speedlife.net/t/project-why-the-fuck-did-i-buy-another-dsm/200126/19 "2008-10-22T22:38:44Z")
> [@OFFICIAL NYSPEED HOODIE/SHIRT ORDER THREAD](https://forums.speedlife.net/t/official-nyspeed-hoodie-shirt-order-thread/37485/32):
>
> cough never will be at tnt cough!
x2!!!
---
### Author:  [@turbob16](https://forums.speedlife.net/u/turbob16)
#### Post date: [October 22, 2008, 11:28pm UTC](https://forums.speedlife.net/t/project-why-the-fuck-did-i-buy-another-dsm/200126/20 "2008-10-22T23:28:51Z")
so far the beemer is faster than the gsx lol jk
[Next page](https://forums.speedlife.net/t/project-why-the-fuck-did-i-buy-another-dsm/200126.md?page=2)