# PRP TNT 9/19
**URL:** https://forums.speedlife.net/t/prp-tnt-9-19/192311
**Category:** PittSpeed Automotive
**Created:** [September 9, 2007, 12:31pm UTC](https://forums.speedlife.net/t/prp-tnt-9-19/192311 "2007-09-09T12:31:57Z")
**Posts on this page:** 20
**Page:** 2
### Author:  [@Pewter](https://forums.speedlife.net/u/Pewter)
#### Post date: [September 13, 2007, 4:49am UTC](https://forums.speedlife.net/t/prp-tnt-9-19/192311/21 "2007-09-13T04:49:54Z")
sorry i couldnt do it myself,i will be there next time u make the trip!
---
### Author:  [@The1SloR\_T](https://forums.speedlife.net/u/The1SloR_T)
#### Post date: [September 14, 2007, 5:56pm UTC](https://forums.speedlife.net/t/prp-tnt-9-19/192311/22 "2007-09-14T17:56:12Z")
well after about 45mins of heating the shit out of the axle nut and breaking 4 1/2 inch powerbars, i got the axle nut off yesterday… axle was snapped and in peices right at the CV closest to the wheel.
Im begining to beleive the axle was the factory 98 axle that came on the car lol
Im still gonna head up on weds, hopeing I dont break the pass. side axle.
But if I do, will you be up there this time brian? 🙂
---
### Author:  [@xlogic](https://forums.speedlife.net/u/xlogic)
#### Post date: [September 15, 2007, 12:37am UTC](https://forums.speedlife.net/t/prp-tnt-9-19/192311/23 "2007-09-15T00:37:57Z")
> [@On another topic](https://forums.speedlife.net/t/32270/199):
>
> well after about 45mins of heating the shit out of the axle nut and breaking 4 1/2 inch powerbars, i got the axle nut off yesterday… axle was snapped and in peices right at the CV closest to the wheel.
>
> Im begining to beleive the axle was the factory 98 axle that came on the car lol
>
> Im still gonna head up on weds, hopeing I dont break the pass. side axle.
> But if I do, will you be up there this time brian? 🙂
hub nut? impact wrench from lowes\>4 useless breaker bars
---
### Author:  [@bgblockelcamino](https://forums.speedlife.net/u/bgblockelcamino)
#### Post date: [September 15, 2007, 12:46am UTC](https://forums.speedlife.net/t/prp-tnt-9-19/192311/24 "2007-09-15T00:46:11Z")
sorry wasn’t able to make it there. i prob would have gotten you if i was home.
---
### Author:  [@The1SloR\_T](https://forums.speedlife.net/u/The1SloR_T)
#### Post date: [September 17, 2007, 10:21pm UTC](https://forums.speedlife.net/t/prp-tnt-9-19/192311/25 "2007-09-17T22:21:58Z")
> [@J&J Shafts yet Another Customer (7/12/07)](https://forums.speedlife.net/t/j-j-shafts-yet-another-customer-7-12-07/32262/291):
>
> hub nut? impact wrench from lowes\>4 useless breaker bars
I’ve got air and an impact wrench. its a craftsman JUNK
I needed a nice torquey wrench.
If the propane torch didnt work i was going to break out the setalyne
all is well tho, went out today and fixed my wheel hop problem and im ready to go. crossin my fingers for 14’s
---
### Author:  [@xlogic](https://forums.speedlife.net/u/xlogic)
#### Post date: [September 18, 2007, 12:10pm UTC](https://forums.speedlife.net/t/prp-tnt-9-19/192311/26 "2007-09-18T12:10:40Z")
> [@BENNY BENASSI Saturday July 21, 2007 Guvernment!](https://forums.speedlife.net/t/benny-benassi-saturday-july-21-2007-guvernment/29332/14):
>
> I’ve got air and an impact wrench. its a craftsman JUNK
> I needed a nice torquey wrench.
> If the propane torch didnt work i was going to break out the setalyne
>
> all is well tho, went out today and fixed my wheel hop problem and im ready to go. crossin my fingers for 14’s
those craftsman bars should have lifetime replacements on them…i know the two i broke trying to do what you did got replaced for free, thats when i bought my impact (kobalt) from lowes…haven’t had any problems since
---
### Author:  [@The1SloR\_T](https://forums.speedlife.net/u/The1SloR_T)
#### Post date: [September 18, 2007, 12:12pm UTC](https://forums.speedlife.net/t/prp-tnt-9-19/192311/27 "2007-09-18T12:12:52Z")
> [@UPDATED: Esprit photoshoot @ Beaver Island (No 56K)](https://forums.speedlife.net/t/updated-esprit-photoshoot-beaver-island-no-56k/32523/9):
>
> those craftsman bars should have lifetime replacements on them…i know the two i broke trying to do what you did got replaced for free, thats when i bought my impact (kobalt) from lowes…haven’t had any problems since
I got the craftsman powerbars replaced.
Just the craftsman impact wrench has no balls to it
---
### Author:  [@xlogic](https://forums.speedlife.net/u/xlogic)
#### Post date: [September 18, 2007, 12:21pm UTC](https://forums.speedlife.net/t/prp-tnt-9-19/192311/28 "2007-09-18T12:21:22Z")
> [@WTB: Head and head gasket for b16a1](https://forums.speedlife.net/t/wtb-head-and-head-gasket-for-b16a1/32529/3):
>
> I got the craftsman powerbars replaced.
>
> Just the craftsman impact wrench has no balls to it
how many lbs of pressure does your compressor have in it when using it? my compressor is an older craftsman with a max of like 200lbs…i usually have her set to auto shut off at 180…that has ripped each and every rusted on bolt out with no problem
---
### Author:  [@The1SloR\_T](https://forums.speedlife.net/u/The1SloR_T)
#### Post date: [September 18, 2007, 12:38pm UTC](https://forums.speedlife.net/t/prp-tnt-9-19/192311/29 "2007-09-18T12:38:46Z")
> [@The last movie you've seen, and rate it.](https://forums.speedlife.net/t/the-last-movie-youve-seen-and-rate-it/27425/169):
>
> how many lbs of pressure does your compressor have in it when using it? my compressor is an older craftsman with a max of like 200lbs…i usually have her set to auto shut off at 180…that has ripped each and every rusted on bolt out with no problem
its not about the compressor, its about the wrench. My big stand up air compresser puts out like 200psi max.
the impact just isnt a high quality wrench
---
### Author:  [@fatti03msp](https://forums.speedlife.net/u/fatti03msp)
#### Post date: [September 18, 2007, 12:42pm UTC](https://forums.speedlife.net/t/prp-tnt-9-19/192311/30 "2007-09-18T12:42:06Z")
i might stop up at PRP if its nice out, its just TnT right.
---
### Author:  [@The1SloR\_T](https://forums.speedlife.net/u/The1SloR_T)
#### Post date: [September 18, 2007, 12:47pm UTC](https://forums.speedlife.net/t/prp-tnt-9-19/192311/31 "2007-09-18T12:47:11Z")
ya its just TNT
lets get this thread back ontopic. we’re leavin and headin up around 330 and probably going to stop for dinner
---
### Author:  [@xlogic](https://forums.speedlife.net/u/xlogic)
#### Post date: [September 18, 2007, 12:59pm UTC](https://forums.speedlife.net/t/prp-tnt-9-19/192311/32 "2007-09-18T12:59:34Z")
> [@Dow cracks 14000!](https://forums.speedlife.net/t/dow-cracks-14000/32493/35):
>
> ya its just TNT
>
> lets get this thread back ontopic. we’re leavin and headin up around 330 and probably going to stop for dinner
pm me if you ever need one you can use mine
i might head up there since i’ve never been but seeing that i have no clutch i wouldn’t be on the track just watching
---
### Author:  [@Pewter](https://forums.speedlife.net/u/Pewter)
#### Post date: [September 18, 2007, 3:05pm UTC](https://forums.speedlife.net/t/prp-tnt-9-19/192311/33 "2007-09-18T15:05:44Z")
> [@Dow cracks 14000!](https://forums.speedlife.net/t/dow-cracks-14000/32493/35):
>
> lets get this thread back ontopic.
now why would we want to do that? takes the fun out of the board!:stick:
---
### Author:  [@The1SloR\_T](https://forums.speedlife.net/u/The1SloR_T)
#### Post date: [September 18, 2007, 3:10pm UTC](https://forums.speedlife.net/t/prp-tnt-9-19/192311/34 "2007-09-18T15:10:32Z")
> [@car is gone](https://forums.speedlife.net/t/car-is-gone/32527/14):
>
> pm me if you ever need one you can use mine
>
> i might head up there since i’ve never been but seeing that i have no clutch i wouldn’t be on the track just watching
I’ve been meaning to go buy one. maybe i’ll chase down a snap on guy 🙂
---
### Author:  [@Pewter](https://forums.speedlife.net/u/Pewter)
#### Post date: [September 18, 2007, 3:12pm UTC](https://forums.speedlife.net/t/prp-tnt-9-19/192311/35 "2007-09-18T15:12:07Z")
> [@Dow cracks 14000!](https://forums.speedlife.net/t/dow-cracks-14000/32493/35):
>
> lets get this thread back ontopic.
---
### Author:  [@The1SloR\_T](https://forums.speedlife.net/u/The1SloR_T)
#### Post date: [September 18, 2007, 3:23pm UTC](https://forums.speedlife.net/t/prp-tnt-9-19/192311/36 "2007-09-18T15:23:33Z")
> [@Big B\> 07 Supercharged Roush 427](https://forums.speedlife.net/t/big-b-07-supercharged-roush-427/32514/28):
>
> ontopic
🤣
---
### Author:  [@JackdUp](https://forums.speedlife.net/u/JackdUp)
#### Post date: [September 18, 2007, 4:31pm UTC](https://forums.speedlife.net/t/prp-tnt-9-19/192311/37 "2007-09-18T16:31:10Z")
Hmmm…I may do this pending bottles being filled, _pit crew support_ and # of fresh axles available. I’d like to see how the 225/50R15 BFG DR’s do compared to the M/T 22x8 slicks.
---
### Author:  [@bgblockelcamino](https://forums.speedlife.net/u/bgblockelcamino)
#### Post date: [September 18, 2007, 5:09pm UTC](https://forums.speedlife.net/t/prp-tnt-9-19/192311/38 "2007-09-18T17:09:54Z")
guess i will get bottles filled and get everything ready for track then.
---
### Author:  [@pruGAR](https://forums.speedlife.net/u/pruGAR)
#### Post date: [September 18, 2007, 5:30pm UTC](https://forums.speedlife.net/t/prp-tnt-9-19/192311/39 "2007-09-18T17:30:24Z")
damnit…i wanna go tomorrow…just put the tranny mount in earlier today…i wish i could go but i have a macro economics test…college sucks…
---
### Author:  [@The1SloR\_T](https://forums.speedlife.net/u/The1SloR_T)
#### Post date: [September 18, 2007, 6:04pm UTC](https://forums.speedlife.net/t/prp-tnt-9-19/192311/40 "2007-09-18T18:04:29Z")
me my group are probably gonna stop to eat at golden corral (golden corral FTW!)
or we might be better off somewhere closer to prp (and out of the 1 lane bullshit on 22) any resturant suggestions?
[Previous page](https://forums.speedlife.net/t/prp-tnt-9-19/192311.md?page=1)
[Next page](https://forums.speedlife.net/t/prp-tnt-9-19/192311.md?page=3)