# PRP trip today!! new best et **URL:** \ **Category:** PittSpeed Automotive\ **Created:** [May 6, 2006, 9:26pm UTC](https://forums.speedlife.net/t/prp-trip-today-new-best-et/182089 "2006-05-06T21:26:26Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![Orr89rocz](https://avatars.discourse-cdn.com/v4/letter/o/ac91a4/32.png) [@Orr89rocz](https://forums.speedlife.net/u/Orr89rocz)\ **Post date:** [May 6, 2006, 9:26pm UTC](https://forums.speedlife.net/t/prp-trip-today-new-best-et/182089/1 "2006-05-06T21:26:26Z")
went to prp today first run was good. went 1.96 60… i went off the line kinda weak. 8.94 at 77 13.98 at 97.9… mph is down some today from my previous 100mph bests. second run did my best 1.937 60 foot… i went hard on launch but let off as i thought it was gonna spin bad but it dead hooked so i had some more in it if i stayed in it. 8.86 at 77.6 13.88 at abit over 98mph not bad 87\_TA was out there too with his new 496 big block camaro. took some passes. went a best of 10.07 at 135 with little tunning. i got a vid of his first pass… 10.2 at 133 [http://videos.streetfire.net/video/024FF74E-B821-4D69-BD9B-849A57A5DBC0.htm](http://videos.streetfire.net/video/024FF74E-B821-4D69-BD9B-849A57A5DBC0.htm) ---
**Author:** ![eurodad](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/eurodad/32/5988_2.png) [@eurodad](https://forums.speedlife.net/u/eurodad)\ **Post date:** [May 7, 2006, 4:41am UTC](https://forums.speedlife.net/t/prp-trip-today-new-best-et/182089/2 "2006-05-07T04:41:59Z")
congrats, but still slower than my truck.:finger: ---
**Author:** ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)\ **Post date:** [May 7, 2006, 5:23am UTC](https://forums.speedlife.net/t/prp-trip-today-new-best-et/182089/3 "2006-05-07T05:23:33Z")
congrats ---
**Author:** ![bics56](https://avatars.discourse-cdn.com/v4/letter/b/47e85d/32.png) [@bics56](https://forums.speedlife.net/u/bics56)\ **Post date:** [May 7, 2006, 5:25am UTC](https://forums.speedlife.net/t/prp-trip-today-new-best-et/182089/4 "2006-05-07T05:25:12Z")
> [@pewterss](#): > > congrats L98 Powa ---
**Author:** ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)\ **Post date:** [May 7, 2006, 5:36am UTC](https://forums.speedlife.net/t/prp-trip-today-new-best-et/182089/5 "2006-05-07T05:36:29Z")
^/ ---
**Author:** ![Quik](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/quik/32/5979_2.png) [@Quik](https://forums.speedlife.net/u/Quik)\ **Post date:** [May 7, 2006, 6:10am UTC](https://forums.speedlife.net/t/prp-trip-today-new-best-et/182089/6 "2006-05-07T06:10:33Z")
> [@Orr89rocz](#): > > went to prp today > > first run was good. > > went 1.96 60… i went off the line kinda weak. > 8.94 at 77 > 13.98 at 97.9… mph is down some today from my previous 100mph bests. > > second run did my best > 1.937 60 foot… i went hard on launch but let off as i thought it was gonna spin bad but it dead hooked so i had some more in it if i stayed in it. > 8.86 at 77.6 > 13.88 at abit over 98mph > > not bad > > 87\_TA was out there too with his new 496 big block camaro. took some passes. went a best of 10.07 at 135 with little tunning. > i got a vid of his first pass… 10.2 at 133 > [http://videos.streetfire.net/video/024FF74E-B821-4D69-BD9B-849A57A5DBC0.htm](http://videos.streetfire.net/video/024FF74E-B821-4D69-BD9B-849A57A5DBC0.htm) dont you have a stall? dont you have suspension? also dont you have like 400lbft? then if so why are you cutting such low 60’s ---
**Author:** ![imported\_weaves](https://avatars.discourse-cdn.com/v4/letter/i/bc8723/32.png) [@imported\_weaves](https://forums.speedlife.net/u/imported_weaves)\ **Post date:** [May 7, 2006, 7:27am UTC](https://forums.speedlife.net/t/prp-trip-today-new-best-et/182089/7 "2006-05-07T07:27:55Z")
> [@Quik](#): > > dont you have a stall? dont you have suspension? also dont you have like 400lbft? then if so why are you cutting such low 60’s I think the answer is easy to see…he’s not Quik. ---
**Author:** ![Quik](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/quik/32/5979_2.png) [@Quik](https://forums.speedlife.net/u/Quik)\ **Post date:** [May 7, 2006, 7:31am UTC](https://forums.speedlife.net/t/prp-trip-today-new-best-et/182089/8 "2006-05-07T07:31:01Z")
> [@weaves](#): > > I think the answer is easy to see…he’s not Quik. well besides that point, i was wondering, maybe his setup may need fine tuning, a stall of his speed should net alot lower 60’s stock converters and suspension see those 60’s. also if he has a stickie tire then it deff should be alot lower ---
**Author:** ![Orr89rocz](https://avatars.discourse-cdn.com/v4/letter/o/ac91a4/32.png) [@Orr89rocz](https://forums.speedlife.net/u/Orr89rocz)\ **Post date:** [May 7, 2006, 9:26am UTC](https://forums.speedlife.net/t/prp-trip-today-new-best-et/182089/9 "2006-05-07T09:26:49Z")
yes quik, it should do alot better 60 foot. my best ever is 1.88. i cant drive it all that great yet. depends on track prep tho. i’m on street tires and my street tires have some decent bite to them, but they aint no drag radial LOL with all that low end power, it spins well so i gotta try and find that balance where i’m on the limit of goin into spin. with sticky tires and full stall useage, it will definately cut some LOW 60’s. right now the car is setup mainly for handling with stiff springs and shocks. i adjusted the front shocks to the softest setting but kept the rear moderately stiff as it seemed to work best for me. i might try to soften the rear abit also i’ll try lowering the control arms to the bottom bracket hole next time. right now its set to parrallel with the ground, so it handles very good and has somewhat good straightline traction. i know its not the fastest thing, but for a full exhaust only 150K mile L98, its moving pretty darn good. ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\ **Post date:** [May 7, 2006, 10:07am UTC](https://forums.speedlife.net/t/prp-trip-today-new-best-et/182089/10 "2006-05-07T10:07:38Z")
congrats now go get some drag radials. ---
**Author:** ![Turbo\_Silverado](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/turbo_silverado/32/5990_2.png) [@Turbo\_Silverado](https://forums.speedlife.net/u/Turbo_Silverado)\ **Post date:** [May 7, 2006, 10:36am UTC](https://forums.speedlife.net/t/prp-trip-today-new-best-et/182089/11 "2006-05-07T10:36:43Z")
> [@Vapor Trail](#): > > congrats > > now go get some drag radials. M/T drag radials ---
**Author:** ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)\ **Post date:** [May 7, 2006, 11:13am UTC](https://forums.speedlife.net/t/prp-trip-today-new-best-et/182089/12 "2006-05-07T11:13:24Z")
> [@weaves](#): > > I think the answer is easy to see…he’s not Quik. :bowrofl: :bowrofl: :bowrofl: :bowrofl: :bowrofl: :bowrofl: :bowrofl: :bowrofl: ---
**Author:** ![87\_TA](https://avatars.discourse-cdn.com/v4/letter/8/53a042/32.png) [@87\_TA](https://forums.speedlife.net/u/87_TA)\ **Post date:** [May 7, 2006, 2:39pm UTC](https://forums.speedlife.net/t/prp-trip-today-new-best-et/182089/13 "2006-05-07T14:39:22Z")
> [@Vapor Trail](#): > > congrats > > now go get some drag radials. I think he is doing great with a basically stock L98! 1.93 60 is pretty good on street tires, especially with a car that makes all of its power so low. You don’t see many guys dipping below 2.0s with basically stock cars with on real street tires. Not saying they should not be~but most are not. And to hit 1.88 on stock L98 on radials is awsome. ---
**Author:** ![Shaggy](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/shaggy/32/5945_2.png) [@Shaggy](https://forums.speedlife.net/u/Shaggy)\ **Post date:** [May 7, 2006, 3:26pm UTC](https://forums.speedlife.net/t/prp-trip-today-new-best-et/182089/14 "2006-05-07T15:26:08Z")
🆒 ---
**Author:** ![Orr89rocz](https://avatars.discourse-cdn.com/v4/letter/o/ac91a4/32.png) [@Orr89rocz](https://forums.speedlife.net/u/Orr89rocz)\ **Post date:** [May 7, 2006, 5:30pm UTC](https://forums.speedlife.net/t/prp-trip-today-new-best-et/182089/15 "2006-05-07T17:30:40Z")
thanks tom! yeah my car does really good for just exhaust mods and converter, like i said. it does have alot more in it on the launch tho, i just need alot more seat time and to get use to the track prep on that day. it does well. it just needs some more traction and some more gearing ---
**Author:** ![bgblockelcamino](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/bgblockelcamino/32/5997_2.png) [@bgblockelcamino](https://forums.speedlife.net/u/bgblockelcamino)\ **Post date:** [May 7, 2006, 5:50pm UTC](https://forums.speedlife.net/t/prp-trip-today-new-best-et/182089/16 "2006-05-07T17:50:02Z")
congrats damn didn’t know 87TA was running hte camaro this year. that is sick ---
**Author:** ![Orr89rocz](https://avatars.discourse-cdn.com/v4/letter/o/ac91a4/32.png) [@Orr89rocz](https://forums.speedlife.net/u/Orr89rocz)\ **Post date:** [May 7, 2006, 7:09pm UTC](https://forums.speedlife.net/t/prp-trip-today-new-best-et/182089/17 "2006-05-07T19:09:52Z")
> damn didn’t know 87TA was running hte camaro this year. that is sick yeah he’s gettin some shakedown passes… the car’s a beast! sounds great too. and no tunin yet i believe. ---
**Author:** ![TeamWRX](https://avatars.discourse-cdn.com/v4/letter/t/74df32/32.png) [@TeamWRX](https://forums.speedlife.net/u/TeamWRX)\ **Post date:** [May 11, 2006, 3:46pm UTC](https://forums.speedlife.net/t/prp-trip-today-new-best-et/182089/18 "2006-05-11T15:46:06Z")
congrats orr. ---
**Author:** ![flyinglow57](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/flyinglow57/32/5978_2.png) [@flyinglow57](https://forums.speedlife.net/u/flyinglow57)\ **Post date:** [May 11, 2006, 6:23pm UTC](https://forums.speedlife.net/t/prp-trip-today-new-best-et/182089/19 "2006-05-11T18:23:31Z")
will 11 wide 4th gen wheels fit on a 3rd gen? if so. i got some beat as nittos on my car right now… im gonna be goin up there in the next week or two then gettin new tires. you can borrow the tires for a run. but i need them to do my runs. ---
**Author:** ![Orr89rocz](https://avatars.discourse-cdn.com/v4/letter/o/ac91a4/32.png) [@Orr89rocz](https://forums.speedlife.net/u/Orr89rocz)\ **Post date:** [May 11, 2006, 7:26pm UTC](https://forums.speedlife.net/t/prp-trip-today-new-best-et/182089/20 "2006-05-11T19:26:45Z")
11inch will fit but i would need 2 inch spacers and then pound in the inner fender well to get them to fit just right. i want to run 11inch zr1 wheels. i have a LS1 rear that i have yet to put in. i’m not sure how much wheel well i would have to pound out to get them to not rub. but it sure wouldnt be a bolt on and run situation. thanks for the offer tho! i would gladly accept if it would work let me know when ur goin up, i’d like to see you run.