# Psyco-Clone **URL:** \ **Category:** Builds\ **Created:** [October 12, 2006, 5:43pm UTC](https://forums.speedlife.net/t/psyco-clone/185561 "2006-10-12T17:43:59Z")\ **Posts on this page:** 20\ **Page:** 6
**Author:** ![GNocide](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/gnocide/32/5947_2.png) [@GNocide](https://forums.speedlife.net/u/GNocide)\ **Post date:** [February 7, 2007, 7:29pm UTC](https://forums.speedlife.net/t/psyco-clone/185561/101 "2007-02-07T19:29:24Z")
good call on the purple wire upsize that sucker ---
**Author:** ![AeroKing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/aeroking/32/6011_2.png) [@AeroKing](https://forums.speedlife.net/u/AeroKing)\ **Post date:** [February 8, 2007, 4:09am UTC](https://forums.speedlife.net/t/psyco-clone/185561/102 "2007-02-08T04:09:56Z")
i checked it where it runs through the engine bay, and theres no burns, or cuts. ---
**Author:** ![GNocide](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/gnocide/32/5947_2.png) [@GNocide](https://forums.speedlife.net/u/GNocide)\ **Post date:** [February 8, 2007, 4:44am UTC](https://forums.speedlife.net/t/psyco-clone/185561/103 "2007-02-08T04:44:08Z")
its undersized for the amps it carries ---
**Author:** ![AeroKing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/aeroking/32/6011_2.png) [@AeroKing](https://forums.speedlife.net/u/AeroKing)\ **Post date:** [February 8, 2007, 7:33am UTC](https://forums.speedlife.net/t/psyco-clone/185561/104 "2007-02-08T07:33:41Z")
i’ll check the cable size when i get home, and see if i cant get anything bigger from Lowe’s everything i’ve read has said that its not the size of the cable (10 AWG) its the heat from the downpipe that melts it. either way, when i put the starter on, i’ll check the cable, and wrap both the starter and cable in heat wrap. ---
**Author:** ![AeroKing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/aeroking/32/6011_2.png) [@AeroKing](https://forums.speedlife.net/u/AeroKing)\ **Post date:** [February 8, 2007, 4:21pm UTC](https://forums.speedlife.net/t/psyco-clone/185561/105 "2007-02-08T16:21:45Z")
i dropped the torque conv. shield to take out my starter, and noticed that i only removed 3 bolts. There is an aftermarket proshaft installed, and i can see why. The original must’ve blew apart hard enough to blow a chunk outta the TC shield. not too worry, its just a chunk, no cracks. and i’m gonna wrap the cable before i bolt the starter back up into place. and it was laying right on the downpipe. ---
**Author:** ![AeroKing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/aeroking/32/6011_2.png) [@AeroKing](https://forums.speedlife.net/u/AeroKing)\ **Post date:** [March 3, 2007, 3:17pm UTC](https://forums.speedlife.net/t/psyco-clone/185561/106 "2007-03-03T15:17:57Z")
workin 8-10 hours a day, 7 days a week for the past couple weeks, hasnt left much time for the truck. i have a new grille ordered, and the front cladding is being repaired. i’m gonna start pieceing together the exhaust this week. and i have a loose bolt on the bracket, which hold the T-case to the tranny, really hard to get a wrench or even fingers up to grab it. i have a set of clear corners, and a set of clear parking lights that’ll go on when the cladding and grille go on. ![http://www.pittspeed.com/uploaded/100_0155a.jpg](http://www.pittspeed.com/uploaded/100_0155a.jpg) ---
**Author:** ![Pewter](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/pewter/32/5936_2.png) [@Pewter](https://forums.speedlife.net/u/Pewter)\ **Post date:** [March 3, 2007, 4:08pm UTC](https://forums.speedlife.net/t/psyco-clone/185561/107 "2007-03-03T16:08:58Z")
> [@AeroKing"](#): > > and i have a loose bolt on the bracket, which hold the T-case to the tranny, really hard to get a wrench or even fingers up to grab it. it aint that hard,i can do it with my fat arms ---
**Author:** ![AeroKing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/aeroking/32/6011_2.png) [@AeroKing](https://forums.speedlife.net/u/AeroKing)\ **Post date:** [March 3, 2007, 6:58pm UTC](https://forums.speedlife.net/t/psyco-clone/185561/108 "2007-03-03T18:58:40Z")
i shoved a pry bar up, and aligned the bracket with the hole in the tranny, and the bolt lined up. ---
**Author:** ![BlkP42E](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/blkp42e/32/5938_2.png) [@BlkP42E](https://forums.speedlife.net/u/BlkP42E)\ **Post date:** [March 4, 2007, 8:56am UTC](https://forums.speedlife.net/t/psyco-clone/185561/109 "2007-03-04T08:56:13Z")
i want your garage ---
**Author:** ![jeremysyty](https://avatars.discourse-cdn.com/v4/letter/j/87869e/32.png) [@jeremysyty](https://forums.speedlife.net/u/jeremysyty)\ **Post date:** [March 4, 2007, 11:22am UTC](https://forums.speedlife.net/t/psyco-clone/185561/110 "2007-03-04T11:22:29Z")
> [@Say Something About the Poster Above you v.2](https://forums.speedlife.net/t/say-something-about-the-poster-above-you-v-2/27854/11): > > i’ll check the cable size when i get home, and see if i cant get anything bigger from Lowe’s > > everything i’ve read has said that its not the size of the cable (10 AWG) its the heat from the downpipe that melts it. > > either way, when i put the starter on, i’ll check the cable, and wrap both the starter and cable in heat wrap. People use a Ford Truck starter solenoid that mounts on the fender instead of the starter. It is cheap and works everytime. My old TY had a major click click start issue. Started everytime but always clicked a few times. ---
**Author:** ![AeroKing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/aeroking/32/6011_2.png) [@AeroKing](https://forums.speedlife.net/u/AeroKing)\ **Post date:** [March 4, 2007, 11:46am UTC](https://forums.speedlife.net/t/psyco-clone/185561/111 "2007-03-04T11:46:41Z")
i put a replacement starter in, and wrapped the cable and wires, but i need a heat blanket to wrap the starter, cause the wiring connections on it are real close to the DP. ---
**Author:** ![4doors5gears](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/4doors5gears/32/6006_2.png) [@4doors5gears](https://forums.speedlife.net/u/4doors5gears)\ **Post date:** [March 4, 2007, 1:10pm UTC](https://forums.speedlife.net/t/psyco-clone/185561/112 "2007-03-04T13:10:48Z")
Is that a Pace Car Fiero? ---
**Author:** ![AeroKing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/aeroking/32/6011_2.png) [@AeroKing](https://forums.speedlife.net/u/AeroKing)\ **Post date:** [March 4, 2007, 5:41pm UTC](https://forums.speedlife.net/t/psyco-clone/185561/113 "2007-03-04T17:41:55Z")
pace car fieros are white ---
**Author:** ![SixSpeed454SS](https://avatars.discourse-cdn.com/v4/letter/s/e19adc/32.png) [@SixSpeed454SS](https://forums.speedlife.net/u/SixSpeed454SS)\ **Post date:** [March 4, 2007, 6:29pm UTC](https://forums.speedlife.net/t/psyco-clone/185561/114 "2007-03-04T18:29:28Z")
it looks white. what color is it? ---
**Author:** ![AeroKing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/aeroking/32/6011_2.png) [@AeroKing](https://forums.speedlife.net/u/AeroKing)\ **Post date:** [March 5, 2007, 4:18am UTC](https://forums.speedlife.net/t/psyco-clone/185561/115 "2007-03-05T04:18:21Z")
![http://www.pittspeed.com/uploaded/05.1706-01.jpg](http://www.pittspeed.com/uploaded/05.1706-01.jpg) its silver and gray it was special ordered for Mrs. Cochran (#1 Cochran), and was taken off the trailer and given to my dad’s buddy. still have the factory floor mats hanging in the closet. ---
**Author:** ![AeroKing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/aeroking/32/6011_2.png) [@AeroKing](https://forums.speedlife.net/u/AeroKing)\ **Post date:** [March 11, 2007, 11:24am UTC](https://forums.speedlife.net/t/psyco-clone/185561/116 "2007-03-11T11:24:22Z")
new grille ![http://www.pittspeed.com/uploaded/03.09.07-01.JPG](http://www.pittspeed.com/uploaded/03.09.07-01.JPG) the bumper cover is in the body shop. i scraped all the rusted undercoating off the frame, and rustoleum-ized it. i have the exhaust parts lying on the floor, i just gotta mock them up. ---
**Author:** ![91blazins10](https://avatars.discourse-cdn.com/v4/letter/9/ecc23a/32.png) [@91blazins10](https://forums.speedlife.net/u/91blazins10)\ **Post date:** [March 11, 2007, 12:31pm UTC](https://forums.speedlife.net/t/psyco-clone/185561/117 "2007-03-11T12:31:38Z")
its gettin there, I finally drove the typhoon a few days ago for the first time since the end of oct. :burnout: ---
**Author:** ![AeroKing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/aeroking/32/6011_2.png) [@AeroKing](https://forums.speedlife.net/u/AeroKing)\ **Post date:** [March 11, 2007, 5:12pm UTC](https://forums.speedlife.net/t/psyco-clone/185561/118 "2007-03-11T17:12:51Z")
> [@On another topic](https://forums.speedlife.net/t/22843/190): > > its gettin there, I finally drove the typhoon a few days ago for the first time since the end of oct. :burnout: break anything? :hahano: :hahano: ---
**Author:** ![91blazins10](https://avatars.discourse-cdn.com/v4/letter/9/ecc23a/32.png) [@91blazins10](https://forums.speedlife.net/u/91blazins10)\ **Post date:** [March 11, 2007, 5:44pm UTC](https://forums.speedlife.net/t/psyco-clone/185561/119 "2007-03-11T17:44:38Z")
> [@WTB roller hockey goalie equipment](https://forums.speedlife.net/t/wtb-roller-hockey-goalie-equipment/28649/7): > > break anything? :hahano: :hahano: not yet:x: ---
**Author:** ![AeroKing](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/aeroking/32/6011_2.png) [@AeroKing](https://forums.speedlife.net/u/AeroKing)\ **Post date:** [March 22, 2007, 5:52pm UTC](https://forums.speedlife.net/t/psyco-clone/185561/120 "2007-03-22T17:52:33Z")
i got about a month to wrap everything up for the first starlite show, on the 4th. and stop puttin time into the SHO, now i have a deadline. my dad is finishing up redetailing the Mach1 enginebay, back close to factory. [Previous page](https://forums.speedlife.net/t/psyco-clone/185561.md?page=5) [Next page](https://forums.speedlife.net/t/psyco-clone/185561.md?page=7)