# Question: SR Elbow flanges \*pic\*

**URL:** <https://forums.speedlife.net/t/question-sr-elbow-flanges-pic/93250>\
**Category:** SON240sx Automotive\
**Created:** [February 27, 2006, 7:57pm UTC](https://forums.speedlife.net/t/question-sr-elbow-flanges-pic/93250 "2006-02-27T19:57:48Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![Gonad](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/gonad/32/5481_2.png) [@Gonad](https://forums.speedlife.net/u/Gonad)\
**Post date:** [February 27, 2006, 7:57pm UTC](https://forums.speedlife.net/t/question-sr-elbow-flanges-pic/93250/1 "2006-02-27T19:57:48Z")

</div>

I am in need of a flange (steel or stainless) that is similar to the one  
shown below in the picture. It’s the flange that will mate up with the  
‘downpipe’.

So, are these ‘Standard 3-bolt Flanges’ that I can purchase at most  
exhaust shops?

The pciture is of the SR20DET turbo elbow (or extension).

![http://son.my240.com/3boltflange.jpg](http://son.my240.com/3boltflange.jpg)

---

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\
**Post date:** [February 27, 2006, 8:10pm UTC](https://forums.speedlife.net/t/question-sr-elbow-flanges-pic/93250/2 "2006-02-27T20:10:08Z")

</div>

tskk tskk tskk.

---

<div class="post-metadata">

**Author:** ![spd-dmn](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/spd-dmn/32/5513_2.png) [@spd-dmn](https://forums.speedlife.net/u/spd-dmn)\
**Post date:** [February 27, 2006, 9:12pm UTC](https://forums.speedlife.net/t/question-sr-elbow-flanges-pic/93250/3 "2006-02-27T21:12:47Z")

</div>

elaboration?

---

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/2X/b/b7170c8eddc0b95ece6b88172b2f416a08489a45.png) [@system](https://forums.speedlife.net/u/system)\
**Post date:** [February 27, 2006, 9:23pm UTC](https://forums.speedlife.net/t/question-sr-elbow-flanges-pic/93250/4 "2006-02-27T21:23:54Z")

</div>

no thanks. elaborated on msn with gonad. :lol:

---

<div class="post-metadata">

**Author:** ![mikesim](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/mikesim/32/5561_2.png) [@mikesim](https://forums.speedlife.net/u/mikesim)\
**Post date:** [February 28, 2006, 11:24am UTC](https://forums.speedlife.net/t/question-sr-elbow-flanges-pic/93250/5 "2006-02-28T11:24:29Z")

</div>

they have those at minute muffler here. it shouldn’t cost mofe than $30.

---

<div class="post-metadata">

**Author:** ![Jedi\_Car\_Fan](https://avatars.discourse-cdn.com/v4/letter/j/b9e5f3/32.png) [@Jedi\_Car\_Fan](https://forums.speedlife.net/u/Jedi_Car_Fan)\
**Post date:** [February 28, 2006, 12:11pm UTC](https://forums.speedlife.net/t/question-sr-elbow-flanges-pic/93250/6 "2006-02-28T12:11:38Z")

</div>

Vibrant Performance sells them as well “plus gaskets” I dont believe their Flanges have the holes threaded thou (like the pic you posted)

---

<div class="post-metadata">

**Author:** ![Gonad](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/gonad/32/5481_2.png) [@Gonad](https://forums.speedlife.net/u/Gonad)\
**Post date:** [February 28, 2006, 4:57pm UTC](https://forums.speedlife.net/t/question-sr-elbow-flanges-pic/93250/7 "2006-02-28T16:57:23Z")

</div>

Aight, I just measured the gasket and this is what I Have:

![http://son.my240.com/3boltflange2.jpg](http://son.my240.com/3boltflange2.jpg)