# Questions - Adding Piston oil squirters to a N/A-gone-Turbo block **URL:** https://forums.speedlife.net/t/questions-adding-piston-oil-squirters-to-a-n-a-gone-turbo-block/23449 **Category:** NYSpeed Automotive **Created:** [January 22, 2007, 7:08pm UTC](https://forums.speedlife.net/t/questions-adding-piston-oil-squirters-to-a-n-a-gone-turbo-block/23449 "2007-01-22T19:08:56Z") **Posts on this page:** 1 **Showing post:** 12
### Author: ![Violator](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/violator/32/7278_2.png) [@Violator](https://forums.speedlife.net/u/Violator) #### Post date: [January 23, 2007, 2:03am UTC](https://forums.speedlife.net/t/questions-adding-piston-oil-squirters-to-a-n-a-gone-turbo-block/23449/12 "2007-01-23T02:03:03Z")
> [@HotRodKid](#): > > we plan on pushing a stock long block to almost double the boost level that normally destroys stock pistons, and we have no intention of installing forged pistons until the stock pistons disintegrate > > with the engine in question, the gasket set is actualy more expensive then forged pistons, so if i can do what i want w/ stockers, il be a happy man I really dont understand why you are going this route. That engine will not live on double the power… squirters or not. If its a newer N/A motor then the upper rings will probably be relatively high on the piston for emission purposes. You boost it, the first thing that will break is the upper ring land… then you toss a rod and all the work is in the toilet. I’d like to know what motor this is since i find it hard to believe that head gaskets are going to cost you $500+ Why do all this and have it blow anyway? seems pointless to me > [@HotRodKid](#): > > edit: and the car will have water injection and FMIC squirters, both run out of an ice chest in the trunk, so intake temps will be quite low as it is… water injection is fine for a race car but if you are depending on it to survive on the street then that is not a reliable setup. You lose the water and you lose the motor… --- _[View the full topic](https://forums.speedlife.net/t/questions-adding-piston-oil-squirters-to-a-n-a-gone-turbo-block/23449)._