# Quick question about lazy-eye toggle switch

**URL:** <https://forums.speedlife.net/t/quick-question-about-lazy-eye-toggle-switch/80149>\
**Category:** SON240sx Automotive\
**Created:** [October 9, 2003, 3:31pm UTC](https://forums.speedlife.net/t/quick-question-about-lazy-eye-toggle-switch/80149 "2003-10-09T15:31:39Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Gonad](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/gonad/32/5481_2.png) [@Gonad](https://forums.speedlife.net/u/Gonad)\
**Post date:** [October 9, 2003, 3:31pm UTC](https://forums.speedlife.net/t/quick-question-about-lazy-eye-toggle-switch/80149/1 "2003-10-09T15:31:39Z")

</div>

So yea, I put in a toggle switch today for the lazy eye. Took like 20min.  
I used 18AWG wire between switch and harness, and the switch had like  
14AWG wire already so it must be a heavy duty switch.

When the switch is ON, the dash headlight toggle switch will work  
normally. No problem there.

Now to do lazy-eye, you do:

- Push dash button to pop up headlight
- Put toggle switch in OFF position
- Push dash button to put down headlight (since toggle is OFF, headlight won’t go down)
- Now flick toggle switch ON/OFF to get desired height

To keep the headlight partially up, the toggle switch will remain in OFF  
position.

Question is, is there any kind of load put on the switch cuz the headlight  
is partially open? Just curious.

---

<div class="post-metadata">

**Author:** ![iQuAGoD](https://avatars.discourse-cdn.com/v4/letter/i/f05b48/32.png) [@iQuAGoD](https://forums.speedlife.net/u/iQuAGoD)\
**Post date:** [October 9, 2003, 5:05pm UTC](https://forums.speedlife.net/t/quick-question-about-lazy-eye-toggle-switch/80149/2 "2003-10-09T17:05:16Z")

</div>

There is no load on the switch, it just doesnt give it signal to close the headlight the rest of the way. This mod won’t do any damage, so there is nothing to worry about.

---

<div class="post-metadata">

**Author:** ![Gonad](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/gonad/32/5481_2.png) [@Gonad](https://forums.speedlife.net/u/Gonad)\
**Post date:** [October 12, 2003, 8:47am UTC](https://forums.speedlife.net/t/quick-question-about-lazy-eye-toggle-switch/80149/3 "2003-10-12T08:47:25Z")

</div>

Yea I figured the motor was the only thing that’d fudge up. I don’t play  
with the toggle as much. I usually get the desired sleepy position in  
one shot anyways. 🙂