# Quick wiring question

**URL:** <https://forums.speedlife.net/t/quick-wiring-question/122240>\
**Category:** SON240sx Automotive\
**Created:** [March 2, 2009, 8:45pm UTC](https://forums.speedlife.net/t/quick-wiring-question/122240 "2009-03-02T20:45:26Z")\
**Posts on this page:** 14\
**Page:** 1

<div class="post-metadata">

**Author:** ![Stefan13](https://avatars.discourse-cdn.com/v4/letter/s/5daacb/32.png) [@Stefan13](https://forums.speedlife.net/u/Stefan13)\
**Post date:** [March 2, 2009, 8:45pm UTC](https://forums.speedlife.net/t/quick-wiring-question/122240/1 "2009-03-02T20:45:26Z")

</div>

hey, I installed my dash resently now I have problems with wiring. My deck seems to be getting no power and I think it’s short circuted with the clock dome light and map light and every time I try turning on the light the door light turns on when my doors are closed. Any tips I think it’s a ground wire?

Thanks, Stefan

---

<div class="post-metadata">

**Author:** ![nd4boost](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nd4boost/32/5627_2.png) [@nd4boost](https://forums.speedlife.net/u/nd4boost)\
**Post date:** [March 2, 2009, 9:01pm UTC](https://forums.speedlife.net/t/quick-wiring-question/122240/2 "2009-03-02T21:01:11Z")

</div>

id take the dash back off see if u crushed or cut anything

---

<div class="post-metadata">

**Author:** ![Stefan13](https://avatars.discourse-cdn.com/v4/letter/s/5daacb/32.png) [@Stefan13](https://forums.speedlife.net/u/Stefan13)\
**Post date:** [March 2, 2009, 9:05pm UTC](https://forums.speedlife.net/t/quick-wiring-question/122240/3 "2009-03-02T21:05:15Z")

</div>

Ah that’s gonna make it even harder, I wish I never replaced that dash. Thanks for your help

---

<div class="post-metadata">

**Author:** ![nd4boost](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nd4boost/32/5627_2.png) [@nd4boost](https://forums.speedlife.net/u/nd4boost)\
**Post date:** [March 2, 2009, 9:11pm UTC](https://forums.speedlife.net/t/quick-wiring-question/122240/4 "2009-03-02T21:11:10Z")

</div>

lol i know its a pain in the ass. Ive done it a couple of times and hope to never do it again  
but if it happened after you put it in, that’s probably the problem

---

<div class="post-metadata">

**Author:** ![Stefan13](https://avatars.discourse-cdn.com/v4/letter/s/5daacb/32.png) [@Stefan13](https://forums.speedlife.net/u/Stefan13)\
**Post date:** [March 2, 2009, 9:19pm UTC](https://forums.speedlife.net/t/quick-wiring-question/122240/5 "2009-03-02T21:19:25Z")

</div>

Actually it happened when my dash was off I could drive with no music and one morning it just stopped working and the deck kind of had a flashing light and it sounds like it has no power to spin the cd

---

<div class="post-metadata">

**Author:** ![nd4boost](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nd4boost/32/5627_2.png) [@nd4boost](https://forums.speedlife.net/u/nd4boost)\
**Post date:** [March 2, 2009, 9:28pm UTC](https://forums.speedlife.net/t/quick-wiring-question/122240/6 "2009-03-02T21:28:12Z")

</div>

did u check the fuses ?? if one is blown u can trace the circuit

---

<div class="post-metadata">

**Author:** ![Stefan13](https://avatars.discourse-cdn.com/v4/letter/s/5daacb/32.png) [@Stefan13](https://forums.speedlife.net/u/Stefan13)\
**Post date:** [March 2, 2009, 9:30pm UTC](https://forums.speedlife.net/t/quick-wiring-question/122240/7 "2009-03-02T21:30:53Z")

</div>

I just checked the audio fuse in the drivers kick panel and it was fine

---

<div class="post-metadata">

**Author:** ![nd4boost](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nd4boost/32/5627_2.png) [@nd4boost](https://forums.speedlife.net/u/nd4boost)\
**Post date:** [March 2, 2009, 9:30pm UTC](https://forums.speedlife.net/t/quick-wiring-question/122240/8 "2009-03-02T21:30:53Z")

</div>

also id take the deck out and bench test it off a battery make shure it works before u go crazy there is also a fuse in the back of the deck u can check it sounds like a bad ground or somth but that would not cause the other problems u speak of

---

<div class="post-metadata">

**Author:** ![Stefan13](https://avatars.discourse-cdn.com/v4/letter/s/5daacb/32.png) [@Stefan13](https://forums.speedlife.net/u/Stefan13)\
**Post date:** [March 2, 2009, 9:38pm UTC](https://forums.speedlife.net/t/quick-wiring-question/122240/9 "2009-03-02T21:38:48Z")

</div>

Yea the fuse in the back of the deck is fine. I think it’s a ground somewhere but I already checked the one coming to deck and it’s mounted properly. I don’t of any other grounds that I could check

---

<div class="post-metadata">

**Author:** ![nd4boost](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nd4boost/32/5627_2.png) [@nd4boost](https://forums.speedlife.net/u/nd4boost)\
**Post date:** [March 2, 2009, 9:49pm UTC](https://forums.speedlife.net/t/quick-wiring-question/122240/10 "2009-03-02T21:49:17Z")

</div>

take the deck out and test it off the battery first make shure it works. twist the ORG and RED together and hook to the + lead put BLK to GRND lead. keep in mind that i have no clue what wires your deck uses but this is usually the case. then go from there

---

<div class="post-metadata">

**Author:** ![nd4boost](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nd4boost/32/5627_2.png) [@nd4boost](https://forums.speedlife.net/u/nd4boost)\
**Post date:** [March 2, 2009, 9:50pm UTC](https://forums.speedlife.net/t/quick-wiring-question/122240/11 "2009-03-02T21:50:35Z")

</div>

if you have a multimeter you could just test the leads off the car sorry im assuming u dont have 1

---

<div class="post-metadata">

**Author:** ![Stefan13](https://avatars.discourse-cdn.com/v4/letter/s/5daacb/32.png) [@Stefan13](https://forums.speedlife.net/u/Stefan13)\
**Post date:** [March 2, 2009, 9:58pm UTC](https://forums.speedlife.net/t/quick-wiring-question/122240/12 "2009-03-02T21:58:24Z")

</div>

Yes I do I’ll do that tomorow. Thanks for your help bro I’ll keep this tread up to date

---

<div class="post-metadata">

**Author:** ![nd4boost](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/nd4boost/32/5627_2.png) [@nd4boost](https://forums.speedlife.net/u/nd4boost)\
**Post date:** [March 2, 2009, 10:02pm UTC](https://forums.speedlife.net/t/quick-wiring-question/122240/13 "2009-03-02T22:02:29Z")

</div>

shit sorry man, just test the leads off the car make sure you have power, check connt to ground off your gnd wire then you will know if the deck works

---

<div class="post-metadata">

**Author:** ![S13GG](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/s13gg/32/5506_2.png) [@S13GG](https://forums.speedlife.net/u/S13GG)\
**Post date:** [March 4, 2009, 5:48am UTC](https://forums.speedlife.net/t/quick-wiring-question/122240/14 "2009-03-04T05:48:41Z")

</div>

S13 radio’s use a case ground, the radio must be screwed into the bracket, bracket screwed to dash support, dash support attached to a-pillars/floor = ground.

or alternate wire attached to harness then grounded.
