# RB **URL:** \ **Category:** SON240sx Automotive\ **Created:** [March 10, 2009, 6:16am UTC](https://forums.speedlife.net/t/rb/122445 "2009-03-10T06:16:18Z")\ **Posts on this page:** 1\ **Showing post:** 357
**Author:** ![Slide\_Junkie](https://avatars.discourse-cdn.com/v4/letter/s/74df32/32.png) [@Slide\_Junkie](https://forums.speedlife.net/u/Slide_Junkie)\ **Post date:** [October 1, 2009, 7:06pm UTC](https://forums.speedlife.net/t/rb/122445/357 "2009-10-01T19:06:44Z")
> [@FS:00 Yamaha Blaster](https://forums.speedlife.net/t/fs-00-yamaha-blaster/23995/42): > > Hey Spencer, > > I went the McKinney route not the crossmember route. They were like $600ish with everything. ^^^^^^^^^^ wow STICKY just laughed my ass off of the qoute you took from mee… Anyways heres a break down of what i spent on my setup 700.00RB20DET complete with extra tranny and 2 extra blocks minus the harness 200.00 RB20DET harness used shipped from Japan shipped through TUNERLAB.jp 480.00 Mckinney engine mounts 400.00 rbperformance fmic kit from OTIS 120.00 Walbro fuel pump from slipperysilvia wired it myself… its like 4 wires have since added SAFC2 Spec stage 4 clutch 6 puck unsprung Bings SR/KA short shifter and soon a sard BOV side note the Mckinney engine mounts themselvs… as in the rubber part suck had one seperate on me… now running hockey pucks 14psi daily ![http://i156.photobucket.com/albums/t18/slide_junkie/My240build/3740791669_85ce04cf0a_o.jpg](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/3X/8/c/8cba3ac65e964af930a7ca80ef071c0400ce332e.jpeg) ![http://i156.photobucket.com/albums/t18/slide_junkie/My240build/3741584672_6e001c2bea_o.jpg](https://canada1.discourse-cdn.com/flex034/uploads/speedlife/original/3X/1/5/150980c7388854453756c78bf9ff868b3e3082f5.jpeg) heres a better pic from the website I got my fmic from… states spool at 600rpm sooner than most other fmic kits for the rb20/25 with stock plenum --- _[View the full topic](https://forums.speedlife.net/t/rb/122445)._