# RB20 180sx
**URL:** https://forums.speedlife.net/t/rb20-180sx/128165
**Category:** Classifieds
**Created:** [September 20, 2009, 5:39pm UTC](https://forums.speedlife.net/t/rb20-180sx/128165 "2009-09-20T17:39:44Z")
**Posts on this page:** 17
**Page:** 1
### Author:  [@jayson](https://forums.speedlife.net/u/jayson)
#### Post date: [September 20, 2009, 5:39pm UTC](https://forums.speedlife.net/t/rb20-180sx/128165/1 "2009-09-20T17:39:44Z")
hey im selling my 1992 nissan 180sx with a RB20DET. the car runs and drives perfect.i bought the car two years ago from JDM Montreal fro 6500$.the entire car has been undercoated, the fenders, front and rear bumper, gas tank, sub frame, basically everything was removed for it to get undercoated. the harness in the front wheel wells have been completely moved so the tire will NEVER rub them.the only problems with this car are the scratches from sitting at a shop and one quarter panel was repaired. this car was supposed to be a race car so everything in the interior is striped out. this car was posted before as a shell.the car has 85K km on it and the motor has about the same, i bought the motor as a front clip so i i will try to get the exact km asap. the oil cooler and relocation are my friends so if im not getting my asking price i will have to take it off. also the wheels that are on the will not come with the car, instead i will install skyline gts wheels. if you have any questions please call me at (647)997-3763 or email at [180sxjay@live.com](mailto:180sxjay@live.com).
you can find all the other pics at [http://s984.photobucket.com/albums/ae330/180sxjayson/](http://s984.photobucket.com/albums/ae330/180sxjayson/)
the car comes with the following:
-RB20DET
-B&M oil cooler+filter relocation. all the lines and fittings are russell
-brand new Hawk HP+ pads in the front and back
-brand new front rotors and machined OEM rear rotors
-brand new OEM nissan clutch and pressure plate
-brand new clutch slave cylinder
-OEM fOHA rear valance
-OEM FOHA side skirts
-OEM pignose front lip (not installed)
-AMS solid subframe bushings
-brand new megan test pipe
-5Zigen 3 inch catback exhaust
-CNC hydro E-brake
-walbro 255lph fuel pump
-knockoff nardi wood steering wheel
-unknown racing seat (small)
-NISMO 4 point harness
-Greddy 60MM boost gauge (peak hold)
-battery relocated to the back seat
-stereo relocated to the glove box
-D2 coil overs (none are blown)
-skyline gts wheels (black 5 spoke wheels not included)
-skyline gts VLSD and axles. i will also throw in a open diff and a welded diff
-front and rear 5 bolt conversion (S14 front spindle and lower control arm)
-JIC traction rods
im asking 7000$
---
### Author:  [@rider](https://forums.speedlife.net/u/rider)
#### Post date: [September 20, 2009, 5:57pm UTC](https://forums.speedlife.net/t/rb20-180sx/128165/2 "2009-09-20T17:57:31Z")
wow man great deal! I wish I had cash right now!
---
### Author:  [@PureEuroM3](https://forums.speedlife.net/u/PureEuroM3)
#### Post date: [September 20, 2009, 6:31pm UTC](https://forums.speedlife.net/t/rb20-180sx/128165/3 "2009-09-20T18:31:34Z")
> [@X-box live gamertag thread\*\*edited with list\*\*](https://forums.speedlife.net/t/x-box-live-gamertag-thread-edited-with-list/22265/616):
>
> wow man great deal! I wish I had cash right now!
Truly epic first post.
---
### Author:  [@future\_240](https://forums.speedlife.net/u/future_240)
#### Post date: [September 20, 2009, 8:41pm UTC](https://forums.speedlife.net/t/rb20-180sx/128165/4 "2009-09-20T20:41:50Z")
bump for a very very clean car!! Jay is definatly a perfectionist when it comes to his car! I’ve seen and driven this car seen it go from sr to rb and eveything in between not one spot of rust on this thing truely undercoated from head to toe!!
---
### Author:  [@Lum15](https://forums.speedlife.net/u/Lum15)
#### Post date: [September 20, 2009, 9:16pm UTC](https://forums.speedlife.net/t/rb20-180sx/128165/5 "2009-09-20T21:16:28Z")
^^^ do you realize your sig says ROLF, instead of ROFL?
---
### Author:  [@nitescream](https://forums.speedlife.net/u/nitescream)
#### Post date: [September 20, 2009, 11:27pm UTC](https://forums.speedlife.net/t/rb20-180sx/128165/6 "2009-09-20T23:27:44Z")
where did you buy the front clip from???
---
### Author:  [@R33](https://forums.speedlife.net/u/R33)
#### Post date: [September 22, 2009, 10:11am UTC](https://forums.speedlife.net/t/rb20-180sx/128165/7 "2009-09-22T10:11:27Z")
> [@FS: Panasonic Head Unit](https://forums.speedlife.net/t/fs-panasonic-head-unit/22153/8):
>
> where did you buy the front clip from???
we sourced the front clip from the importers by dixie / 401 … The motor has perfect compression and runs amazing
---
### Author:  [@jayson](https://forums.speedlife.net/u/jayson)
#### Post date: [September 24, 2009, 5:10pm UTC](https://forums.speedlife.net/t/rb20-180sx/128165/8 "2009-09-24T17:10:13Z")
The price is OBO everyone
---
### Author:  [@trinituner](https://forums.speedlife.net/u/trinituner)
#### Post date: [September 24, 2009, 5:54pm UTC](https://forums.speedlife.net/t/rb20-180sx/128165/9 "2009-09-24T17:54:43Z")
jay trade me for my silvia !! lol!!
---
### Author:  [@jayson](https://forums.speedlife.net/u/jayson)
#### Post date: [September 25, 2009, 4:33pm UTC](https://forums.speedlife.net/t/rb20-180sx/128165/10 "2009-09-25T16:33:02Z")
Idk If I can handle ur hi HP car
---
### Author:  [@jayson](https://forums.speedlife.net/u/jayson)
#### Post date: [September 28, 2009, 10:35am UTC](https://forums.speedlife.net/t/rb20-180sx/128165/11 "2009-09-28T10:35:11Z")
Price drop to 6000$
---
### Author:  [@braden](https://forums.speedlife.net/u/braden)
#### Post date: [September 29, 2009, 9:51am UTC](https://forums.speedlife.net/t/rb20-180sx/128165/12 "2009-09-29T09:51:14Z")
how much whp tq are you putting out ?
---
### Author:  [@Noga](https://forums.speedlife.net/u/Noga)
#### Post date: [September 29, 2009, 5:42pm UTC](https://forums.speedlife.net/t/rb20-180sx/128165/13 "2009-09-29T17:42:11Z")
fucking sick dawg
---
### Author:  [@Specialedition](https://forums.speedlife.net/u/Specialedition)
#### Post date: [September 29, 2009, 6:40pm UTC](https://forums.speedlife.net/t/rb20-180sx/128165/14 "2009-09-29T18:40:19Z")
did you mount your side skirts with wood screws?
---
### Author:  [@jayson](https://forums.speedlife.net/u/jayson)
#### Post date: [September 30, 2009, 3:44pm UTC](https://forums.speedlife.net/t/rb20-180sx/128165/15 "2009-09-30T15:44:07Z")
No the side skirts and rear valance held on by alum. Rrivits\*
---
### Author:  [@jayson](https://forums.speedlife.net/u/jayson)
#### Post date: [October 2, 2009, 2:20pm UTC](https://forums.speedlife.net/t/rb20-180sx/128165/16 "2009-10-02T14:20:14Z")
I’m open to offers and trades guys
---
### Author:  [@Graeme](https://forums.speedlife.net/u/Graeme)
#### Post date: [October 2, 2009, 2:24pm UTC](https://forums.speedlife.net/t/rb20-180sx/128165/17 "2009-10-02T14:24:12Z")
Interior pics?