# RB20 and ka24 parts oem parts act clutch altima fans **URL:** https://forums.speedlife.net/t/rb20-and-ka24-parts-oem-parts-act-clutch-altima-fans/271689 **Category:** Classifieds **Created:** [February 13, 2015, 5:59pm UTC](https://forums.speedlife.net/t/rb20-and-ka24-parts-oem-parts-act-clutch-altima-fans/271689 "2015-02-13T17:59:52Z") **Posts on this page:** 1 **Page:** 1
### Author: ![RustyS13](https://avatars.discourse-cdn.com/v4/letter/r/b38774/32.png) [@RustyS13](https://forums.speedlife.net/u/RustyS13) #### Post date: [February 13, 2015, 5:59pm UTC](https://forums.speedlife.net/t/rb20-and-ka24-parts-oem-parts-act-clutch-altima-fans/271689/1 "2015-02-13T17:59:52Z")
**6 OEM RB20DET injectors, no problems they’re all in good condition and the plastic is not damaged: $OLD** RB20DET oem maf with hks cone adapter $50 RB20DET oem ecu $100 RB20DET oem camshafts I have two complete sets available, both are in great condition $50 each pair RB20DET oem pistons set of 6 never saw high boost only used stock turbo $100 RB20DET oem conrods set of 6 never saw high boost only used stock turbo $100 RB20DET headbolts complete set $30 KA24DE 5 speed ecu from 93 hatch $40 2000 Altima electric rad fans(you can use it on your 240 with MINIMAL mods) $40 **KA24DE 5 speed flywheel good shape not rusty $OLD** KA24DE OEM replacement clutch and pressure plate approx 15,000 km on it still has lots of life. $50 KA24DE/RB20DET ACT SS heavy duty “street” clutch no more then 5000km on it good for about 300-350 tq $250 S13 KA-T 3" down pipe stainless steel for t3/t4 turbo setup. im pretty sure if you re-clock the flange it will work on an rb/sr swap I attempted to use it with my rb20det looked like it would fit if the flange was in the right direction. $100 S13 ghetto catback with the flange cut off on the front no resonator and dented muffler tip, 3" ss bee\*r muffler $80 please PM for contact information