# rb25 swap plus 5 speed conversion

**URL:** <https://forums.speedlife.net/t/rb25-swap-plus-5-speed-conversion/220859>\
**Category:** SON240sx Automotive\
**Created:** [February 29, 2012, 2:50pm UTC](https://forums.speedlife.net/t/rb25-swap-plus-5-speed-conversion/220859 "2012-02-29T14:50:19Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![marky](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/marky/32/6144_2.png) [@marky](https://forums.speedlife.net/u/marky)\
**Post date:** [February 29, 2012, 2:50pm UTC](https://forums.speedlife.net/t/rb25-swap-plus-5-speed-conversion/220859/1 "2012-02-29T14:50:19Z")

</div>

just about to begin my first swap + 5 speed conversion  
i have the engine tranny slave and converted efi harness to ecu

at the top of my head i figured id need for the **swap**  
a custom Drive shaft  
r33 crossmember (or maybe cefiro )  
mounts  
down pipe

and for the **5spd**   
clutch pedal  
clutch master  
lines  
and a lower engine harness

but correct me if im wrong, i need help

---

<div class="post-metadata">

**Author:** ![nickpavlyukh](https://avatars.discourse-cdn.com/v4/letter/n/ce73a5/32.png) [@nickpavlyukh](https://forums.speedlife.net/u/nickpavlyukh)\
**Post date:** [February 29, 2012, 5:29pm UTC](https://forums.speedlife.net/t/rb25-swap-plus-5-speed-conversion/220859/2 "2012-02-29T17:29:50Z")

</div>

Use the stock 240sx lower harness. It works better than the RB lower harness.

---

<div class="post-metadata">

**Author:** ![marky](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/marky/32/6144_2.png) [@marky](https://forums.speedlife.net/u/marky)\
**Post date:** [February 29, 2012, 9:48pm UTC](https://forums.speedlife.net/t/rb25-swap-plus-5-speed-conversion/220859/3 "2012-02-29T21:48:04Z")

</div>

roger that