# Rear tie rod
**URL:** https://forums.speedlife.net/t/rear-tie-rod/101664
**Category:** SON240sx Automotive
**Created:** [November 13, 2006, 2:04pm UTC](https://forums.speedlife.net/t/rear-tie-rod/101664 "2006-11-13T14:04:46Z")
**Posts on this page:** 3
**Page:** 1
### Author:  [@LDN\_D.K](https://forums.speedlife.net/u/LDN_D.K)
#### Post date: [November 13, 2006, 2:04pm UTC](https://forums.speedlife.net/t/rear-tie-rod/101664/1 "2006-11-13T14:04:46Z")
So heres the deal i have a 93 super hicas 240sx, and i had to change the rear suspension on the drivers side, the lower control arm and forward link, i also had to change the tie rod, i got a new 1, but for sum reason the old 1 doesnt want to cum out, it spins but doesnt seem to be loosening frm the steering rack, not talking about the bushing connection, if any 1 has any ideas on what might be wrong, let me knw, thks Sunjay
---
### Author:  [@logik23](https://forums.speedlife.net/u/logik23)
#### Post date: [November 13, 2006, 7:11pm UTC](https://forums.speedlife.net/t/rear-tie-rod/101664/2 "2006-11-13T19:11:51Z")
You mean the inner tie rod? You need a special tool for that, I dunno if theres enough clearance for a pipe wrench.
---
### Author:  [@LDN\_D.K](https://forums.speedlife.net/u/LDN_D.K)
#### Post date: [November 13, 2006, 9:38pm UTC](https://forums.speedlife.net/t/rear-tie-rod/101664/3 "2006-11-13T21:38:20Z")
yeh the inner tie rod, i tryed getting at with a pair of vice grips, anyone have the tool to lend out, i need it fixed asap?