# rear wiper

**URL:** https://forums.speedlife.net/t/rear-wiper/105009
**Category:** SON240sx Automotive
**Created:** [March 29, 2007, 2:53pm UTC](https://forums.speedlife.net/t/rear-wiper/105009 "2007-03-29T14:53:14Z")
**Posts on this page:** 4
**Page:** 1

<div class="post-metadata">

### Author: ![l2iceboy](https://avatars.discourse-cdn.com/v4/letter/l/35a633/32.png) [@l2iceboy](https://forums.speedlife.net/u/l2iceboy)
#### Post date: [March 29, 2007, 2:53pm UTC](https://forums.speedlife.net/t/rear-wiper/105009/1 "2007-03-29T14:53:14Z")

</div>

hey guys, ok when i bought my 240, the rear wiper was put on wrong…instead of facing up right, it’s along the bottom of the rear window…as if it was in it’s down position…but when i turn the switch on, it wipes down lol which means it goes off the hatch lol…i unscrewed the 3 screws holding the motor in, but how do i disconnect it from the wiper arm there? do i twist it? i tried it, so either that’s wrong, or it’s on REALLY tight lol…

---

<div class="post-metadata">

### Author: ![spd-dmn](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/spd-dmn/32/5513_2.png) [@spd-dmn](https://forums.speedlife.net/u/spd-dmn)
#### Post date: [March 29, 2007, 3:37pm UTC](https://forums.speedlife.net/t/rear-wiper/105009/2 "2007-03-29T15:37:02Z")

</div>

has nothin to do with the motor

lift the cover up at the base of the arm  
undo the nut  
lift the arm up and reposition it properly  
tighten nut

---

<div class="post-metadata">

### Author: ![l2iceboy](https://avatars.discourse-cdn.com/v4/letter/l/35a633/32.png) [@l2iceboy](https://forums.speedlife.net/u/l2iceboy)
#### Post date: [March 29, 2007, 3:41pm UTC](https://forums.speedlife.net/t/rear-wiper/105009/3 "2007-03-29T15:41:11Z")

</div>

ahh alrite gonna go try it now, thanks

---

<div class="post-metadata">

### Author: ![l2iceboy](https://avatars.discourse-cdn.com/v4/letter/l/35a633/32.png) [@l2iceboy](https://forums.speedlife.net/u/l2iceboy)
#### Post date: [March 29, 2007, 3:50pm UTC](https://forums.speedlife.net/t/rear-wiper/105009/4 "2007-03-29T15:50:44Z")

</div>

omgosh, that was so simple, i didnt even think to check if that was a cover at the base of the wiper, thanks alot, sorry for wasting your time lol
