# rebuild diff

**URL:** <https://forums.speedlife.net/t/rebuild-diff/65724>\
**Category:** NYSpeed Automotive\
**Created:** [April 6, 2009, 4:04pm UTC](https://forums.speedlife.net/t/rebuild-diff/65724 "2009-04-06T16:04:04Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![icantthink4155](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/icantthink4155/32/5370_2.png) [@icantthink4155](https://forums.speedlife.net/u/icantthink4155)\
**Post date:** [April 6, 2009, 4:04pm UTC](https://forums.speedlife.net/t/rebuild-diff/65724/1 "2009-04-06T16:04:04Z")

</div>

Anyone do this? Im too lazy to set the backlash and all that, plus Idk how. I got a new bearing for the pinion and I need the housing reassembled. Its a diff from a 96(I believe) Miata. I’d be willing to help as much as possible.

---

<div class="post-metadata">

**Author:** ![challengermike](https://yyz2.discourse-cdn.com/flex034/user_avatar/forums.speedlife.net/challengermike/32/5106_2.png) [@challengermike](https://forums.speedlife.net/u/challengermike)\
**Post date:** [April 6, 2009, 7:40pm UTC](https://forums.speedlife.net/t/rebuild-diff/65724/2 "2009-04-06T19:40:23Z")

</div>

I can do it.But you should replace all the bearings while your doing it.Theres 2 pinion bearings and 2 carrier bearings.And you will have to replace the pinion seal.And if it uses a crush sleeve it will need one also.If interested pm me.